Standard delivery
£8 ex VAT · free over £200UK parcel delivery is £8 ex VAT, or free on orders over £200 ex VAT.
Heavier items may be charged at a weight-based or pallet rate, shown at checkout.
£5.92
The WAGO 232-112/026-047 is a 12-pole angled female pluggable connector with an opposing latch arrangement, designed for detachable electrical connections in industrial automation, control panels and electronic equipment. Part of the WAGO MCS MIDI Classic 232 Series, it offers a compact multi-pole connection interface for industrial power, signal and control wiring.
The connector features a 5 mm pin spacing and a single conductor connection per pole, providing twelve independent electrical connection positions. The 232 Series uses CAGE CLAMP® spring connection technology, enabling screwless termination of copper conductors and convenient cable pre-assembly.
The /026-047 variant is identified as an angled female connector with an opposing latch configuration. This makes it suitable for equipment requiring a particular mating and retention arrangement. The corresponding standard 232-112 connector is specified for conductors up to 2.5 mm² and an IEC rated current of 14 A; these family ratings should be checked against the exact variant documentation before final electrical design.
Technical note: The exact /026-047 suffix is identifiable as a 12-pole angled female connector with opposing latch arrangement. Detailed electrical, material and dimensional data listed for the standard /026-000 version are family references and have not been independently confirmed for the /026-047 variant.
The WAGO CAGE CLAMP® connection system uses spring pressure to maintain electrical contact with correctly prepared conductors. This connection method eliminates conventional screw-terminal tightening requirements and provides a practical solution for industrial equipment wiring. The standard 232 Series design accommodates different copper conductor constructions within its specified connection range.
The WAGO 232-112/026-047 combines a twelve-pole connection arrangement with an angled conductor entry and opposing latch configuration. These features support detachable wiring assemblies where connector orientation and mechanical retention are important considerations. The angled design is particularly useful in control enclosures and electronic equipment with limited cable-routing space.
For dependable operation, the connector must be paired with a mechanically and electrically compatible male connector. The opposing latch arrangement, conductor preparation requirements and applicable current and voltage ratings should be verified using the exact variant documentation. WAGO MCS connectors without load-breaking capacity must not be connected or disconnected while live or under load.
| Manufacturer | WAGO |
|---|---|
| Manufacturer part number | 232-112/026-047 |
| Series | MCS MIDI Classic / 232 Series |
| Product type | Angled female pluggable connector |
| Connector gender | Female / socket |
| Locking configuration | Opposing latch |
| Connection technology | CAGE CLAMP® |
| Number of poles | 12 |
| Conductors per pole | 1 |
| Total conductor connection points | 12 |
| Total electrical potentials | 12 |
| Nominal pin spacing | 5 mm |
| Conductor entry arrangement | Angled |
| Actuation method | Operating tool |
| Mounting arrangement | Free-hanging / cable-side connector |
| Maximum conductor cross-section (standard 232-112 family) | 2.5 mm² |
| Conductor range (standard 232-112/026-000) | 0.08–2.5 mm² |
| Conductor size (standard variant) | 28–12 AWG |
| Rated current (IEC, standard variant) | 14 A |
| Rated voltage (IEC, standard variant) | 630 V under category II / pollution degree 2 |
| Conductor stripping length (standard variant) | 8–9 mm |
| Contact material (standard variant) | Copper alloy |
| Contact plating (standard variant) | Tin |
| Housing material (standard variant) | Polyamide 66 (PA66) |
| Housing colour (standard variant) | Grey |
| Flammability classification (standard variant) | UL94 V-0 |
| Temperature limit range (standard variant) | −60 to +85 °C |
| Product group | Multi Connection System (MCS) |
The WAGO 232-112/026-047 is a 12-pole angled female pluggable connector with an opposing latch arrangement, intended for detachable electrical connections in industrial control panels, automation systems and electronic equipment.
The connector has 12 poles, providing twelve separate electrical connection positions with one conductor connection per pole.
The opposing latch configuration identifies a particular mechanical retention arrangement for the connector. The exact mating connector must have compatible locking geometry to ensure correct engagement.
The connector has a nominal 5 mm pin spacing, corresponding to the MCS MIDI Classic 232 Series connector system.
The WAGO 232 Series MCS MIDI Classic connector family uses CAGE CLAMP® spring connection technology, providing screwless conductor termination.
The standard WAGO 232-112 connector supports copper conductors from 0.08 to 2.5 mm². The permitted range for the exact /026-047 variant should be confirmed from its manufacturer documentation.
The corresponding standard WAGO 232-112/026-000 connector has an IEC rated current of 14 A. The electrical rating of the /026-047 variant and complete mating assembly should be verified before use.
The standard WAGO 232-112 connector specifies a conductor stripping length of 8–9 mm. Confirm this requirement for the /026-047 variant before installation.
Interchangeability should not be assumed. The /026-047 variant is identified with an opposing latch arrangement, and its mechanical configuration may differ from the standard /026-000 version. Check the mating geometry and manufacturer documentation.
No load-breaking capability has been established for this variant. WAGO MCS connectors without breaking capacity must not be connected or disconnected while live or under load. Isolate the supply before mating or unmating the connector.
WAGO MCS MIDI Classic connectors offer practical electrical interconnection solutions for industrial automation, machine building and electronic control equipment, combining established CAGE CLAMP® spring connection technology with modular connector designs and flexible cable-routing arrangements.
We use cookies
We use essential cookies to run this site, your basket and checkout. With your permission we'd also like to use analytics and advertising cookies to understand how the site is used and to measure our adverts.