Standard delivery
£8 ex VAT · free over £200UK parcel delivery is £8 ex VAT, or free on orders over £200 ex VAT.
Heavier items may be charged at a weight-based or pallet rate, shown at checkout.
£2.51
The WAGO 232-105/026-000 is a 5-pole, 1-conductor angled female pluggable connector designed for reliable electrical connections in industrial automation, control panels and electronic equipment. Part of the WAGO MCS MIDI Classic 232 Series, it uses proven CAGE CLAMP® spring connection technology to provide secure, screwless conductor termination.
Featuring a 5 mm pin spacing, a conductor connection capacity of up to 2.5 mm² and an IEC rated current of 14 A, the WAGO 232-105/026-000 offers a compact interface between field wiring and compatible male connectors. Its five-pole configuration provides five independent electrical potentials, making it suitable for industrial power, signal and control wiring.
The connector incorporates an angled conductor entry arrangement, allowing convenient cable routing in space-constrained equipment. Its grey insulating housing, integrated test ports and coding fingers support practical installation, testing and connector identification. The detachable female interface also simplifies modular equipment assembly, maintenance and replacement.
The WAGO CAGE CLAMP® connection system uses spring pressure to maintain secure electrical contact with correctly prepared copper conductors. The connection technology accommodates different conductor constructions within the permitted ranges and eliminates the need for conventional terminal screw tightening. Operating-tool actuation enables controlled conductor insertion and removal.
The WAGO 232-105/026-000 combines this spring-clamp technology with an angled female connector arrangement. Its design supports convenient cable pre-assembly and on-equipment wiring, while the integrated test ports facilitate inspection and electrical troubleshooting. The coding fingers provide an additional means of configuring mating arrangements within compatible MCS connector systems.
The connector's tin-plated copper alloy contacts, flame-retardant housing and detachable interface make it suitable for modular industrial equipment. Correct conductor preparation, mating connector selection and adherence to the specified electrical ratings are essential for reliable operation. The connector should not be connected or disconnected while carrying an electrical load unless the complete assembly is expressly rated for that purpose.
Tick the specs you need, then view products that match.
| Current | 14 A | |
|---|---|---|
| Voltage | 320 V | |
| Product Series | WAGO 232 | |
| Rated surge voltage | 4 kV | |
| Number of plug-in contact rows | 1 | |
| Connectable cable type | Tubular cable | |
| Flammability class of insulation material according to UL 94 | V0 | |
| Operating temperature | -60 – 85 °C | |
| Rated current In | 14 A | |
| Connectable conductor cross section fine-strand without cable end sleeve | 0.08 – 2.5 mm² | |
| Degree of protection (IP), mounted | IP20 | |
| Material insulation body | Thermoplastic | |
| Coating housing | Uncoated | |
| Connectable conductor cross section multi-wired | 0.08 – 2.5 mm² | |
| Housing colour | Grey | |
| Modular spacing contacts | 5 mm | |
| Angle contact/conductor connection | 270° (downwards vertical) | |
| Contact type | Bus | |
| Material contact | Other copper alloys | |
| Type of electric connection | Spring clamp connection | |
| Housing material | Plastic | |
| Type of connection | Printed circuit board to cable | |
| Connectable conductor cross section fine-strand with cable end sleeve | 0.25 – 1.5 mm² | |
| Modular spacing connections | 5 mm | |
| Number of poles | 5 | |
| Material of contact surface | Tin | |
| Rated voltage | 320 V | |
| Pollution degree | 2 | |
| Connectable conductor cross section solid-core | 0.08 – 2.5 mm² | |
| Overvoltage category | III | |
| Manufacturer | WAGO | |
| Manufacturer part number | 232-105/026-000 | |
| Series | MCS MIDI Classic / 232 Series | |
| Product type | 1-conductor angled female pluggable connector | |
| Connector gender | Female / socket | |
| Connection technology | CAGE CLAMP® | |
| Conductors per pole | 1 | |
| Total conductor connection points | 5 | |
| Total electrical potentials | 5 | |
| Number of contact rows | 1 | |
| Pin spacing | 5 mm | |
| Rated current (IEC) | 14 A | |
| Rated voltage (IEC, III / 3) | 320 V | |
| Rated voltage (IEC, II / 2) | 630 V | |
| Rated impulse voltage | 4 kV | |
| Maximum conductor cross-section | 2.5 mm² | |
| Conductor size | 28–12 AWG | |
| Conductor stripping length | 8–9 mm | |
| Conductor entry arrangement | Angled | |
| Contact/conductor connection angle | 270° (downwards vertical) | |
| Actuation type | Operating tool | |
| Testing provision | Integrated test ports | |
| Coding provision | Integrated coding fingers | |
| Mounting arrangement | Free-hanging / cable-side connector | |
| Width | 27.4 mm | |
| Height | 23.9 mm | |
| Depth | 22.75 mm | |
| Weight | Approx. 9.416 g | |
| Contact material | Copper alloy | |
| Contact plating | Tin | |
| Flammability classification | UL94 V-0 | |
| Temperature limit range | −60 to +85 °C | |
| Product group | Multi Connection System (MCS) |
The WAGO 232-105/026-000 is a 5-pole angled female pluggable connector used for detachable electrical connections in industrial automation, control panels, electronic equipment and PCB-to-cable wiring systems.
The connector has 5 poles, providing five separate electrical potentials with one conductor connection point per pole.
It uses CAGE CLAMP® spring connection technology, which provides secure, screwless conductor termination using spring pressure.
The connector has a 5 mm pin spacing and is designed for use with appropriately matched WAGO MCS MIDI Classic mating connectors.
The connector has an IEC rated current of 14 A, subject to the applicable installation conditions and the ratings of the complete connector assembly.
The WAGO 232-105/026-000 supports copper conductors up to 2.5 mm². The permitted minimum conductor size and ferrule requirements depend on conductor construction.
The recommended stripping length is 8–9 mm to ensure correct insertion into the CAGE CLAMP® connection.
The angled design allows conductors to approach the connector from a different direction relative to the mating interface, making cable routing more convenient in compact electrical equipment and control enclosures.
Yes. The connector features integrated test ports that support electrical testing and troubleshooting without requiring conductor removal.
The WAGO MCS connector system is not generally intended for load-breaking operation. Isolate the electrical supply before mating or unmating the connector unless the complete assembly is specifically approved for another procedure.
WAGO MCS MIDI Classic connectors provide dependable electrical interconnection solutions for industrial automation, machine building and control equipment, combining established CAGE CLAMP® spring connection technology with compact angled designs, integrated testing features and convenient detachable wiring interfaces.
We use cookies
We use essential cookies to run this site, your basket and checkout. With your permission we'd also like to use analytics and advertising cookies to understand how the site is used and to measure our adverts.