Standard delivery
£8 ex VAT · free over £200UK parcel delivery is £8 ex VAT, or free on orders over £200 ex VAT.
Heavier items may be charged at a weight-based or pallet rate, shown at checkout.
£2.01
The WAGO 232-104/026-000 is a compact and dependable 4-pole, 1-conductor angled female pluggable connector designed for secure electrical connections in industrial automation, control panels and electronic equipment. Part of the WAGO MCS MIDI Classic 232 series, this connector incorporates proven CAGE CLAMP® spring connection technology, providing reliable conductor termination without conventional screw terminals.
Featuring a 270° conductor entry direction relative to the mating direction, the WAGO 232-104/026-000 allows convenient cable routing in compact electrical installations. Its 5 mm pin spacing, integrated test ports and coding fingers support efficient wiring, electrical testing and organised connector arrangements in modular equipment.
With an IEC rated current of 14 A, a rated voltage of 320 V under overvoltage category III and support for conductors up to 2.5 mm², this connector is suitable for industrial control and electrical distribution applications. Its grey polyamide housing and detachable design make it a practical choice for panel builders, automation engineers and OEM equipment manufacturers.
The WAGO 232-104/026-000 uses CAGE CLAMP® spring-pressure connection technology to provide secure electrical contact without conventional terminal screws. Its spring clamping mechanism maintains consistent contact pressure and accommodates a wide range of conductor types, helping ensure dependable performance in industrial control and electronic equipment.
The connector's 270° angled conductor entry arrangement enables convenient cable routing where installation space is restricted. Its CAGE CLAMP® mechanism can be actuated using an operating tool, supporting efficient cable pre-assembly and on-unit wiring. Integrated test ports facilitate electrical measurements and fault diagnosis without unnecessary conductor removal.
As part of the WAGO MCS MIDI Classic pluggable connection system, this connector provides a detachable electrical interface when used with a compatible mating component. Its coding features, durable insulating housing and compact dimensions support organised, serviceable electrical assemblies. The connector is not designed for load-breaking operation and must be disconnected only when the circuit is safely isolated.
Tick the specs you need, then view products that match.
| Current | 14 A | |
|---|---|---|
| Voltage | 320 V | |
| Product Series | WAGO 232 | |
| Rated surge voltage | 4 kV | |
| Number of plug-in contact rows | 1 | |
| Connectable cable type | Tubular cable | |
| Flammability class of insulation material according to UL 94 | V0 | |
| Operating temperature | -60 – 85 °C | |
| Rated current In | 14 A | |
| Connectable conductor cross section fine-strand without cable end sleeve | 0.08 – 2.5 mm² | |
| Degree of protection (IP), mounted | IP20 | |
| Material insulation body | Thermoplastic | |
| Coating housing | Uncoated | |
| Connectable conductor cross section multi-wired | 0.08 – 2.5 mm² | |
| Housing colour | Grey | |
| Modular spacing contacts | 5 mm | |
| Angle contact/conductor connection | 270° (downwards vertical) | |
| Contact type | Bus | |
| Material contact | Other copper alloys | |
| Type of electric connection | Spring clamp connection | |
| Housing material | Plastic | |
| Type of connection | Printed circuit board to cable | |
| Connectable conductor cross section fine-strand with cable end sleeve | 0.25 – 1.5 mm² | |
| Modular spacing connections | 5 mm | |
| Number of poles | 4 | |
| Material of contact surface | Tin | |
| Rated voltage | 320 V | |
| Pollution degree | 2 | |
| Connectable conductor cross section solid-core | 0.08 – 2.5 mm² | |
| Overvoltage category | III | |
| Manufacturer | WAGO | |
| Series | MCS MIDI Classic 232 | |
| Model | 232-104/026-000 | |
| Product type | Angled female pluggable connector / terminal block | |
| Connector configuration | 1-conductor female connector | |
| Number of connection points | 4 | |
| Number of electrical potentials | 4 | |
| Number of levels | 1 | |
| Connection technology | CAGE CLAMP® | |
| Conductor termination | Spring-pressure connection | |
| Rated current (IEC) | 14 A | |
| Rated voltage (IEC, III/3) | 320 V | |
| Rated voltage (IEC, III/2) | 320 V | |
| Rated voltage (IEC, II/2) | 630 V | |
| Rated impulse voltage | 4 kV | |
| Rated voltage (UL) | 600 V | |
| Rated current (UL) | 15 A | |
| Pin spacing | 5 mm | |
| Solid conductor cross-section | 0.08–2.5 mm² | |
| Fine-stranded conductor cross-section | 0.08–2.5 mm² | |
| Fine-stranded conductor with insulated ferrule | 0.25–1.5 mm² | |
| Fine-stranded conductor with uninsulated ferrule | 0.25–2.5 mm² | |
| Conductor size (AWG) | 28–12 AWG | |
| Strip length | 8–9 mm | |
| Actuation type | Operating tool | |
| Conductor entry direction relative to mating direction | 270° | |
| Connector design | Angled | |
| Connector gender | Female / socket | |
| Mounting type | Free-hanging / in-line | |
| Connector locking | Retention latches | |
| Integrated test ports | Yes | |
| Coding fingers | Yes | |
| Insulation material | Polyamide 66 (PA66) | |
| Contact material | Copper alloy | |
| Contact plating | Tin | |
| Flammability classification | UL 94 V-0 | |
| Operating temperature range | −60 to +85 °C | |
| Dimensions (W × H × D) | 22.4 × 23.9 × 22.75 mm | |
| Weight | Approximately 7.56 g | |
| GTIN / EAN | 4044918383806 |
The WAGO 232-104/026-000 is a 4-pole angled female pluggable connector designed for detachable electrical connections in industrial automation, control panels, electronic equipment and modular electrical systems.
The connector has four poles with one conductor connection per pole, providing a total of four connection points across four independent electrical potentials.
The WAGO 232-104/026-000 has an IEC rated current of 14 A. Its rated voltage is 320 V under overvoltage category III and 630 V under overvoltage category II, pollution degree 2.
The connector accepts solid and fine-stranded conductors from 0.08 to 2.5 mm². Fine-stranded conductors with insulated ferrules are supported from 0.25 to 1.5 mm², while uninsulated ferrules are supported from 0.25 to 2.5 mm².
The connector uses WAGO CAGE CLAMP® spring connection technology, providing reliable screwless conductor termination. An operating tool is used to actuate the spring clamp during conductor insertion and removal.
The connector has a 270° conductor entry direction relative to the mating direction, allowing conductors to be routed at an angle to the plug-in connection. This arrangement is useful for compact equipment and installations where cable routing space is limited.
Yes. The connector incorporates integrated test ports that support electrical testing and troubleshooting without requiring conductors to be removed from their terminals.
No. The WAGO MCS MIDI Classic connector system does not provide load-breaking capability. The connector should only be connected or disconnected after the circuit has been safely isolated and is no longer live or carrying load current.
WAGO MCS MIDI Classic pluggable connectors provide dependable electrical connection solutions for industrial machinery, control systems and electronic equipment. The WAGO 232-104/026-000 combines proven CAGE CLAMP® technology, a compact four-pole angled configuration and versatile conductor compatibility to support efficient installation, reliable operation and convenient servicing in modern industrial electrical assemblies.
We use cookies
We use essential cookies to run this site, your basket and checkout. With your permission we'd also like to use analytics and advertising cookies to understand how the site is used and to measure our adverts.