Standard delivery
£8 ex VAT · free over £200UK parcel delivery is £8 ex VAT, or free on orders over £200 ex VAT.
Heavier items may be charged at a weight-based or pallet rate, shown at checkout.
£1.53
The WAGO 232-103/026-000 is a compact and reliable 3-pole, 1-conductor angled female pluggable connector designed for secure electrical connections in industrial automation, control panels and electronic equipment. Part of the WAGO MCS MIDI Classic 232 series, this connector incorporates proven CAGE CLAMP® spring connection technology, providing dependable conductor termination without conventional screw terminals.
Featuring an angled connector design with a 270° conductor entry direction relative to the mating direction, the WAGO 232-103/026-000 enables convenient wiring in equipment where connection orientation and installation space are important. Its 5 mm pin spacing, integrated test ports and coding fingers make it suitable for modular electrical assemblies requiring organised, serviceable connections.
With an IEC rated current of 14 A, a rated voltage of up to 630 V under overvoltage category II, pollution degree 2, and support for conductors from 0.08 to 2.5 mm², the WAGO 232-103/026-000 provides a practical connection solution for industrial machinery, electrical control equipment and PCB-based systems.
The WAGO 232-103/026-000 uses CAGE CLAMP® spring-pressure connection technology to establish secure electrical contact without conventional screw terminals. The spring clamping mechanism accommodates different conductor types while maintaining consistent contact pressure, helping ensure dependable electrical performance in machinery and industrial control systems.
Its angled 270° conductor entry arrangement provides additional flexibility when routing conductors within compact electrical enclosures and electronic assemblies. The connector supports cable pre-assembly and on-unit wiring through operating-tool actuation, helping simplify installation and maintenance. Integrated test ports allow electrical measurements without unnecessary conductor disconnection.
As part of the WAGO MCS MIDI Classic pluggable connection system, this female connector can be paired with compatible mating components to create detachable electrical interfaces. The connector is intended for use in appropriately rated circuits and must not be connected or disconnected while live or under load, as the MCS system does not provide load-breaking capability.
Tick the specs you need, then view products that match.
| Current | 14 A | |
|---|---|---|
| Voltage | 320 V | |
| Product Series | WAGO 232 | |
| Rated surge voltage | 4 kV | |
| Number of plug-in contact rows | 1 | |
| Connectable cable type | Tubular cable | |
| Flammability class of insulation material according to UL 94 | V0 | |
| Operating temperature | -60 – 85 °C | |
| Rated current In | 14 A | |
| Connectable conductor cross section fine-strand without cable end sleeve | 0.08 – 2.5 mm² | |
| Degree of protection (IP), mounted | IP20 | |
| Material insulation body | Thermoplastic | |
| Coating housing | Uncoated | |
| Connectable conductor cross section multi-wired | 0.08 – 2.5 mm² | |
| Housing colour | Grey | |
| Modular spacing contacts | 5 mm | |
| Angle contact/conductor connection | 270° (downwards vertical) | |
| Contact type | Bus | |
| Material contact | Other copper alloys | |
| Type of electric connection | Spring clamp connection | |
| Housing material | Plastic | |
| Type of connection | Printed circuit board to cable | |
| Connectable conductor cross section fine-strand with cable end sleeve | 0.25 – 1.5 mm² | |
| Modular spacing connections | 5 mm | |
| Number of poles | 3 | |
| Material of contact surface | Tin | |
| Rated voltage | 320 V | |
| Pollution degree | 2 | |
| Connectable conductor cross section solid-core | 0.08 – 2.5 mm² | |
| Overvoltage category | III | |
| Manufacturer | WAGO | |
| Series | MCS MIDI Classic 232 | |
| Model | 232-103/026-000 | |
| Product type | Angled female pluggable connector / terminal block | |
| Connector configuration | 1-conductor female connector | |
| Number of connection points | 3 | |
| Number of electrical potentials | 3 | |
| Number of levels | 1 | |
| Connection technology | CAGE CLAMP® | |
| Conductor termination | Spring-pressure connection | |
| Rated current (IEC) | 14 A | |
| Rated voltage (IEC, II/2) | 630 V | |
| Rated impulse voltage (IEC, II/2) | 4 kV | |
| Rated current (UL) | 15 A | |
| Pin spacing | 5 mm | |
| Solid conductor cross-section | 0.08–2.5 mm² | |
| Fine-stranded conductor cross-section | 0.08–2.5 mm² | |
| Fine-stranded conductor with insulated ferrule | 0.25–1.5 mm² | |
| Fine-stranded conductor with uninsulated ferrule | 0.25–2.5 mm² | |
| Conductor size (AWG) | 28–12 AWG | |
| Strip length | 8–9 mm | |
| Actuation type | Operating tool | |
| Conductor entry direction relative to mating direction | 270° | |
| Connector design | Angled | |
| Connector gender | Female / socket | |
| Connector connection type | For conductors | |
| Plug-in locking mechanism | Without | |
| Mismating protection | No | |
| Integrated test ports | Yes | |
| Coding fingers | Yes | |
| Insulation material | Polyamide 66 (PA66) | |
| Material group | I | |
| Contact material | Copper alloy | |
| Contact plating | Tin-plated | |
| Clamping spring material | Chrome-nickel spring steel (CrNi) | |
| Flammability classification | UL 94 V-0 | |
| Temperature limit range | −60 to +85 °C | |
| Dimensions (W × H × D) | 17.4 × 23.9 × 22.75 mm | |
| Weight | Approximately 5.8 g | |
| Fire load | 0.097 MJ | |
| GTIN / EAN | 4044918393140 |
The WAGO 232-103/026-000 is a 3-pole angled female pluggable connector used for detachable electrical connections in industrial automation, control panels, electronic equipment and modular electrical systems.
The connector provides three poles with one conductor connection per pole, giving a total of three connection points across three independent electrical potentials.
The WAGO 232-103/026-000 has an IEC rated current of 14 A and a rated voltage of 630 V under overvoltage category II, pollution degree 2. The rated impulse withstand voltage is 4 kV.
The connector accepts solid and fine-stranded conductors from 0.08 to 2.5 mm². Fine-stranded conductors with insulated ferrules are supported from 0.25 to 1.5 mm², while uninsulated ferrules are supported from 0.25 to 2.5 mm².
The connector uses WAGO CAGE CLAMP® spring connection technology, which provides secure, screwless conductor termination. An operating tool is used to actuate the spring clamp during conductor insertion and removal.
The connector has a 270° conductor entry direction relative to the mating direction, allowing conductors to be routed at an angle to the plug-in connection. This is useful for compact electrical equipment and installations where cable routing is restricted.
Yes. The connector incorporates integrated test ports that support electrical testing and troubleshooting without requiring the conductors to be removed from their terminals.
No. The WAGO MCS MIDI Classic connector system does not provide load-breaking capability. The connector should only be connected or disconnected when the circuit has been safely isolated and is not live or carrying load current.
WAGO MCS MIDI Classic pluggable connectors are designed to provide dependable electrical connection solutions for industrial machinery, control systems and electronic equipment. The WAGO 232-103/026-000 combines proven CAGE CLAMP® technology, a compact angled configuration and versatile conductor compatibility to support efficient installation, reliable electrical connections and convenient maintenance in modern industrial assemblies.
We use cookies
We use essential cookies to run this site, your basket and checkout. With your permission we'd also like to use analytics and advertising cookies to understand how the site is used and to measure our adverts.