Standard delivery
£8 ex VAT · free over £200UK parcel delivery is £8 ex VAT, or free on orders over £200 ex VAT.
Heavier items may be charged at a weight-based or pallet rate, shown at checkout.
£1.10
The WAGO 232-102/026-000 is a 2-pole, 1-conductor angled female pluggable connector from the WAGO MCS MIDI Classic 232 Series. Featuring proven CAGE CLAMP® spring-pressure connection technology, a 5 mm contact pitch and a compact grey insulating housing, this connector provides a dependable solution for detachable electrical connections in industrial automation, electronic control systems and PCB-based equipment.
Designed with a 270° conductor entry orientation relative to the mating direction, the WAGO 232-102/026-000 allows conductors to enter at an angle to the plug-in interface. This configuration is particularly useful when equipment layout, enclosure dimensions or cable routing requirements make a straight-entry connector less convenient.
The connector supports solid and fine-stranded conductors from 0.08 to 2.5 mm² and provides an IEC rated current of 14 A. Its CAGE CLAMP® termination system accommodates different conductor types without conventional screw tightening, helping simplify installation and provide consistent electrical contact.
With an IEC rated voltage of 630 V under the applicable rating conditions, integrated test ports and configurable coding features, the WAGO 232-102/026-000 is a practical choice for engineers requiring a compact, serviceable two-pole connector with angled conductor entry.
Technical selection note: Electrical ratings are subject to the relevant standards, approval conditions and complete connector assembly configuration. Always check the mating header, conductor type, circuit requirements and current WAGO technical documentation before installation.
The WAGO 232-102/026-000 uses WAGO's established CAGE CLAMP® spring-pressure connection technology to provide dependable electrical contact without conventional screw terminals. The spring mechanism securely clamps the conductor, eliminating the need for screw-terminal tightening during installation.
Unlike connector designs restricted to a narrow range of conductor constructions, CAGE CLAMP® technology supports suitable solid, stranded and fine-stranded conductors. The operating tool opens the spring clamp, allowing the prepared conductor to be inserted before the spring applies the required contact pressure.
The connector accepts solid and fine-stranded conductors from 0.08 to 2.5 mm². For fine-stranded conductors fitted with ferrules, the supported range depends on whether insulated or uninsulated ferrules are used. The specified 8–9 mm stripping length helps ensure proper conductor positioning inside the terminal.
The WAGO 232-102/026-000 also provides parallel and perpendicular operating-tool access relative to the conductor entry direction. This arrangement can make conductor termination more convenient during cable pre-assembly and when wiring components already installed in equipment.
The 270° conductor entry orientation is a defining feature of the WAGO 232-102/026-000. Instead of directing conductors straight along the connector's mating axis, the angled configuration provides an alternative cable exit direction.
This can be advantageous in control cabinets, compact electronic enclosures and PCB-based equipment where wiring must be routed around neighbouring components or enclosure walls.
The connector's 5 mm pitch allows it to mate with correctly specified WAGO MCS MIDI Classic male headers. The exact mating component must be selected according to its contact pitch, two-pole arrangement, mechanical orientation and electrical ratings.
Integrated coding fingers and anti-rotation protection help support correct mechanical configuration. The connector also includes test ports that can assist appropriately trained personnel during electrical testing and commissioning.
As with other pluggable electrical connectors without a specified load-breaking function, the WAGO 232-102/026-000 should not be connected or disconnected under load. Electrical circuits should be safely isolated before mating or separation.
Tick the specs you need, then view products that match.
| Current | 14 A | |
|---|---|---|
| Voltage | 320 V | |
| Product Series | WAGO 232 | |
| Rated surge voltage | 4 kV | |
| Number of plug-in contact rows | 1 | |
| Connectable cable type | Tubular cable | |
| Flammability class of insulation material according to UL 94 | V0 | |
| Operating temperature | -60 – 85 °C | |
| Rated current In | 14 A | |
| Connectable conductor cross section fine-strand without cable end sleeve | 0.08 – 2.5 mm² | |
| Degree of protection (IP), mounted | IP20 | |
| Material insulation body | Thermoplastic | |
| Coating housing | Uncoated | |
| Connectable conductor cross section multi-wired | 0.08 – 2.5 mm² | |
| Housing colour | Grey | |
| Modular spacing contacts | 5 mm | |
| Angle contact/conductor connection | 270° (downwards vertical) | |
| Contact type | Bus | |
| Material contact | Other copper alloys | |
| Type of electric connection | Spring clamp connection | |
| Housing material | Plastic | |
| Type of connection | Printed circuit board to cable | |
| Connectable conductor cross section fine-strand with cable end sleeve | 0.25 – 1.5 mm² | |
| Modular spacing connections | 5 mm | |
| Number of poles | 2 | |
| Material of contact surface | Tin | |
| Rated voltage | 320 V | |
| Pollution degree | 2 | |
| Connectable conductor cross section solid-core | 0.08 – 2.5 mm² | |
| Overvoltage category | III | |
| Manufacturer | WAGO | |
| Manufacturer part number | 232-102/026-000 | |
| Series | 232 Series / MCS MIDI Classic | |
| Product type | 1-conductor angled female pluggable connector | |
| Conductors per pole | 1 | |
| Total conductor connection points | 2 | |
| Contact gender | Female / socket | |
| Connector design | Angled | |
| Connection technology | CAGE CLAMP® | |
| Termination method | Screwless spring-pressure connection | |
| Actuation type | Operating tool | |
| Actuation directions | Parallel and perpendicular to conductor entry | |
| Rated current (IEC) | 14 A | |
| Rated voltage (IEC) | 630 V | |
| Rated current (UL) | 15 A | |
| Rated voltage (UL) | 600 V | |
| Contact pitch | 5 mm | |
| Solid conductor cross-section | 0.08–2.5 mm² | |
| Fine-stranded conductor cross-section | 0.08–2.5 mm² | |
| Fine-stranded conductor with insulated ferrule | 0.25–1.5 mm² | |
| Fine-stranded conductor with uninsulated ferrule | 0.25–2.5 mm² | |
| Conductor size | 28–12 AWG | |
| Conductor stripping length | 8–9 mm | |
| Conductor entry direction | 270° relative to mating direction | |
| Mounting arrangement | Free-hanging / conductor-mounted | |
| Variable coding | Yes | |
| Anti-rotation protection | Yes | |
| Integrated test ports | Yes | |
| Plug-in locking mechanism | No separate locking mechanism specified | |
| Contact material | Copper alloy | |
| Contact plating | Tin | |
| Flammability classification | UL94 V-0 | |
| Operating temperature range | −60 to +85 °C | |
| Width | 12.4 mm | |
| Height | 23.9 mm | |
| Depth | 22.75 mm | |
| Dimensions (W × H × D) | 12.4 × 23.9 × 22.75 mm | |
| Country of origin | Poland | |
| GTIN / EAN | 4044918383745 |
The WAGO 232-102/026-000 is a 2-pole, 1-conductor angled female pluggable connector from the WAGO MCS MIDI Classic 232 Series. It features CAGE CLAMP® termination, a 5 mm pitch and a grey housing.
The connector has 2 poles, with one conductor connection per pole, providing two separate conductor connection points.
The connector features a 5 mm contact pitch and must be used with a compatible mating header.
The connector has an IEC rated current of 14 A and a listed UL rated current of 15 A, subject to the relevant approval and installation conditions.
The connector has a listed IEC rated voltage of 630 V and a UL rated voltage of 600 V. The applicable rating depends on the relevant standard and installation conditions.
The WAGO 232-102/026-000 accepts solid and fine-stranded conductors from 0.08 to 2.5 mm², equivalent to 28–12 AWG. Fine-stranded conductors with insulated ferrules are supported from 0.25 to 1.5 mm², while those with uninsulated ferrules are supported from 0.25 to 2.5 mm².
CAGE CLAMP® is WAGO's spring-pressure conductor termination technology. An operating tool opens the clamp so a prepared conductor can be inserted, after which the spring provides secure electrical contact without conventional screw tightening.
The 270° conductor entry indicates the orientation of the conductor entry relative to the connector's mating direction. It provides an angled cable-routing arrangement rather than a straight-entry configuration.
Yes. The connector features integrated test ports that support electrical testing and commissioning when used according to the manufacturer's instructions.
The specified conductor stripping length is 8–9 mm.
The WAGO 232-102/026-000 is a 2-pole, 1-conductor angled female connector with a 5 mm pitch and CAGE CLAMP® termination. The WAGO 231-2302/026-000 is a different connector variant with two conductor entries per pole and a 5.08 mm pitch. The connectors should not be treated as interchangeable without checking the mating specifications.
The connector should not be connected or disconnected under load unless the manufacturer explicitly specifies a suitable load-breaking capability. The electrical circuit should be safely isolated before mating or separation.
WAGO MCS MIDI Classic connectors provide practical modular electrical interconnections for industrial equipment. Combining CAGE CLAMP® technology, a compact 5 mm pitch, integrated test ports and a 270° angled conductor entry, the WAGO 232-102/026-000 offers a reliable, serviceable solution for two-pole electrical connections.
We use cookies
We use essential cookies to run this site, your basket and checkout. With your permission we'd also like to use analytics and advertising cookies to understand how the site is used and to measure our adverts.