Standard delivery
£8 ex VAT · free over £200UK parcel delivery is £8 ex VAT, or free on orders over £200 ex VAT.
Heavier items may be charged at a weight-based or pallet rate, shown at checkout.
£1.74
The WAGO 231-969/001-000 is a robust 9-pole right-angle male PCB connector designed for reliable, detachable electrical connections in industrial automation, electronic control systems and electrical equipment. As part of the established WAGO 231 Series MCS MIDI Classic connector range, this through-hole PCB header provides a dependable interface between printed circuit boards and compatible female pluggable terminal block connectors.
Featuring a 7.62 mm contact pitch and angled 1.2 × 1.2 mm solder pins, the connector is designed for through-hole technology (THT) mounting directly onto printed circuit boards. Its 90° right-angle configuration allows the mating connector to be inserted parallel to the PCB surface, making it particularly suitable for applications requiring side-entry wiring, horizontal connector access and efficient use of space inside electrical enclosures.
With an IEC rated current of 16 A and rated voltages up to 1,000 V under specified IEC/EN 60664-1 insulation coordination conditions, the WAGO 231-969/001-000 provides a practical connection solution for industrial power and control circuits. Its shrouded orange polyamide housing, tin-plated electrolytic copper contacts and nine-pole configuration make it particularly suitable for modular machinery, industrial control boards and serviceable electronic assemblies.
The WAGO 231-969/001-000 provides a robust electrical interface between printed circuit boards and compatible detachable wiring connectors. Its nine male contacts are soldered directly into the PCB using through-hole technology, creating a durable electrical and mechanical connection for industrial control equipment, power distribution interfaces and electronic assemblies.
The connector features 1.2 × 1.2 mm square solder pins, which support a nominal current rating of up to 16 A and enhance the mechanical stability of the PCB connection. Compared with smaller solder pin configurations, this construction provides a practical solution for applications requiring higher current capacity and dependable board-mounted electrical connections.
Its 90° right-angle design allows compatible female connector plugs to mate parallel to the PCB surface. This is particularly beneficial for circuit boards installed inside compact enclosures, equipment requiring side-access wiring and modular industrial systems. The WAGO MCS MIDI Classic connector system also allows compatible plugs to be disconnected for servicing without disturbing the soldered PCB header.
The shrouded housing, integrated coding fingers and anti-rotation protection support reliable mechanical integration. As part of the WAGO MCS system, this connector is designed for connections without breaking capacity and must not be connected or disconnected while live or under load. Electrical system designs should also ensure that accessible male contacts are not live when the mating connector is removed.
Tick the specs you need, then view products that match.
| Current | 16 A | |
|---|---|---|
| Voltage | 630 V | |
| Product Series | WAGO 231 | |
| Rated surge voltage | 6 kV | |
| Number of plug-in contact rows | 1 | |
| Flammability class of insulation material according to UL 94 | V0 | |
| Operating temperature | -60 – 100 °C | |
| Rated current In | 16 A | |
| Material insulation body | Thermoplastic | |
| Housing colour | Orange | |
| Modular spacing contacts | 7.62 mm | |
| Angle PCB/contact | 0°/180° (horizontal) | |
| Contact type | Pin | |
| Type of electric connection | Soldering connection | |
| Type of fastening | Solder | |
| Type of connection | Flexible PCB-connector | |
| Length pin | 3.8 mm | |
| Modular spacing connections | 7.62 mm | |
| Number of poles | 9 | |
| Connector model | Free connector | |
| Suitable for PCB thickness | 1.5 mm | |
| Type of banding | None | |
| Rated voltage | 630 V | |
| Material of contact surface | Tin | |
| Pollution degree | 2 | |
| Overvoltage category | III | |
| Type of PCB fastening | Connecting contact | |
| Manufacturer | WAGO | |
| Series | 231 Series / MCS MIDI Classic | |
| Model | 231-969/001-000 | |
| Product type | Right-angle male PCB header / pluggable connector | |
| Connector configuration | 9-pole, 9-way | |
| Total number of potentials | 9 | |
| Number of contact rows | 1 | |
| Number of levels | 1 | |
| Contact gender | Male / pin | |
| Connector system | MCS MIDI Classic | |
| Rated current (IEC) | 16 A | |
| Rated current (UL) | 15 A | |
| Rated voltage (IEC/EN 60664-1, II/2) | 1,000 V | |
| Rated voltage (UL) | 600 V | |
| Rated impulse voltage (IEC, II/2) | 6 kV | |
| Pin spacing / pitch | 7.62 mm | |
| PCB connection technology | Through-hole technology (THT) | |
| Termination method | Solder pins | |
| Solder pin dimensions | 1.2 × 1.2 mm | |
| Solder pin projection | 3.8 mm | |
| Solder pins per potential | 1 | |
| Solder pin arrangement | Single row, angled | |
| Mounting type | Through-hole PCB mounting | |
| Connector orientation | Right-angle / horizontal | |
| Mating direction relative to PCB | 0° / parallel to PCB | |
| Connector housing | Shrouded, with closed ends | |
| Anti-rotation protection | Yes | |
| Contact material | Electrolytic copper | |
| Contact plating | Tin-plated | |
| Insulation material | Polyamide 66 (PA66) | |
| Flammability classification | UL94 V-0 | |
| Temperature limit range | −60 to +100 °C | |
| Width | 69.16 mm | |
| Height | 12.2 mm | |
| Depth | 12 mm | |
| Dimensions (W × H × D) | 69.16 × 12.2 × 12 mm | |
| Weight | approx. 4.09 g | |
| Compliance | RoHS compliant | |
| Applicable standards | IEC/EN 60664-1, IEC 61984, UL 1059 and UL 1977 | |
| Country of origin | Poland | |
| GTIN / EAN | 4044918932547 |
The WAGO 231-969/001-000 is a 9-pole right-angle male PCB connector used to provide detachable electrical connections between printed circuit boards and compatible female pluggable terminal block connectors in industrial automation, control equipment and electronic assemblies.
The connector has 9 poles arranged in a single row, providing nine separate electrical contact positions for compatible power and control circuits.
The connector has an IEC rated current of 16 A and a UL rated current of 15 A, subject to the applicable standards, mating connector ratings and installation conditions.
The connector features a 7.62 mm pitch between adjacent contacts and is designed for compatible WAGO MCS MIDI Classic connector assemblies.
The connector uses through-hole technology (THT) and is soldered directly to a printed circuit board using nine angled 1.2 × 1.2 mm square solder pins. Its right-angle configuration allows the mating connector to be inserted parallel to the PCB surface.
The 231-969/001-000 provides nine electrical contact positions and features 1.2 × 1.2 mm solder pins with a 16 A IEC current rating. Certain smaller 231 Series PCB headers use 1 × 1 mm solder pins and have a lower rated current. The exact electrical ratings and dimensions depend on the individual connector variant.
The connector has a rated voltage of 1,000 V under IEC/EN 60664-1 overvoltage category II, pollution degree 2 conditions. Its UL voltage rating is 600 V. The permissible operating voltage depends on the applicable standard, installation environment and complete connector assembly.
The connector features an orange polyamide 66 (PA66) insulating housing with a UL94 V-0 flammability classification. Its electrical contacts are manufactured from tin-plated electrolytic copper.
The connector has a specified temperature limit range of −60 to +100 °C, supporting use in industrial electronic applications within the applicable electrical and environmental limits.
No. The WAGO MCS MIDI Classic connector system is designed for electrical connections without breaking capacity. The connector must not be connected or disconnected while live or under load, and accessible male contacts must be protected against hazardous voltages when unmated.
WAGO 231 Series MCS MIDI Classic PCB connectors provide dependable electrical interconnections for industrial electronics and automation equipment. Combining robust through-hole solder mounting, 16 A current capability, tin-plated contacts and a durable insulating housing, the WAGO 231-969/001-000 offers a practical solution for reliable, serviceable and space-efficient nine-pole printed circuit board connections.
We use cookies
We use essential cookies to run this site, your basket and checkout. With your permission we'd also like to use analytics and advertising cookies to understand how the site is used and to measure our adverts.