Standard delivery
£8 ex VAT · free over £200UK parcel delivery is £8 ex VAT, or free on orders over £200 ex VAT.
Heavier items may be charged at a weight-based or pallet rate, shown at checkout.
£0.816
The WAGO 231-964/001-000 is a robust 4-pole angled male PCB header designed to provide reliable, detachable electrical connections between printed circuit boards and compatible pluggable female connectors. Part of the WAGO MCS MIDI Classic 231 Series, this industrial connector combines a 7.62 mm contact pitch, 1.2 × 1.2 mm square solder pins and a durable orange insulating housing to support dependable wire-to-board connectivity in automation, machinery and electronic control equipment.
Its right-angle configuration allows the mating connector to engage horizontally, parallel to the PCB surface. This makes the header particularly suitable for control modules, power supplies and industrial electronic assemblies where cable routing and vertical clearance must be carefully managed. The connector uses through-hole technology (THT), with four solder pins designed to create permanent electrical and mechanical connections to a suitably prepared printed circuit board.
With an IEC rated current of 16 A and rated voltages of up to 1000 V under the applicable insulation coordination conditions, the WAGO 231-964/001-000 provides a capable interface for industrial power, control and signal circuits. Its four-sided shrouded male contacts, tin-plated electrolytic copper conductors and flame-retardant PA66 housing help deliver dependable performance in professionally designed electrical equipment.
The WAGO 231-964/001-000 provides a robust through-hole PCB connection interface for industrial electronic equipment. Its four 1.2 × 1.2 mm square solder pins are designed for insertion into correctly specified PCB holes and permanent solder termination, establishing a stable electrical and mechanical connection between the header and the printed circuit board.
Unlike cable-side female connectors that use spring pressure terminals, the 231-964/001-000 is a male PCB header with solder pins. It forms the board-mounted side of a detachable connector assembly and is intended to mate with compatible WAGO MCS MIDI Classic female connectors. Its right-angle configuration enables horizontal cable entry, helping designers optimise enclosure space and maintain convenient access to connected wiring.
The 7.62 mm contact pitch, four-sided shrouded housing and tin-plated copper contacts support accurate connector engagement and reliable electrical conductivity. The larger solder pin cross-section supports the connector's 16 A IEC rated current, while the flame-retardant PA66 housing provides durable insulation. The complete connector assembly must be assessed against the applicable electrical ratings, PCB clearances and installation requirements, and must not be mated or unmated while energised or under load.
Tick the specs you need, then view products that match.
| Current | 16 A | |
|---|---|---|
| Voltage | 630 V | |
| Product Series | WAGO 231 | |
| Rated surge voltage | 6 kV | |
| Number of plug-in contact rows | 1 | |
| Flammability class of insulation material according to UL 94 | V0 | |
| Operating temperature | -60 – 100 °C | |
| Rated current In | 16 A | |
| Material insulation body | Thermoplastic | |
| Housing colour | Orange | |
| Modular spacing contacts | 7.62 mm | |
| Angle PCB/contact | 0°/180° (horizontal) | |
| Contact type | Pin | |
| Type of electric connection | Soldering connection | |
| Type of fastening | Solder | |
| Type of connection | Flexible PCB-connector | |
| Length pin | 3.8 mm | |
| Modular spacing connections | 7.62 mm | |
| Number of poles | 4 | |
| Connector model | Free connector | |
| Suitable for PCB thickness | 1.5 mm | |
| Type of banding | None | |
| Rated voltage | 630 V | |
| Material of contact surface | Tin | |
| Pollution degree | 2 | |
| Overvoltage category | III | |
| Type of PCB fastening | Connecting contact | |
| Manufacturer | WAGO | |
| Manufacturer part number | 231-964/001-000 | |
| Series | MCS MIDI Classic 231 Series | |
| Product type | Angled male PCB header | |
| Connector category | Pluggable terminal block header | |
| Connector gender | Male | |
| Number of contacts | 4 | |
| Total number of potentials | 4 | |
| Number of levels | 1 | |
| Number of contact rows | 1 | |
| Contact pitch | 7.62 mm | |
| Contact pitch (imperial) | 0.3 in | |
| Rated current (IEC) | 16 A | |
| Rated voltage (IEC, III/3) | 500 V | |
| Rated voltage (IEC, III/2) | 630 V | |
| Rated voltage (IEC, II/2) | 1000 V | |
| Rated impulse withstand voltage (IEC) | 6 kV | |
| Rated current (UL) | 15 A | |
| Rated voltage (UL) | 600 V | |
| Mounting technology | Through-hole technology (THT) | |
| PCB mounting | Through-hole | |
| Termination method | Solder | |
| Header orientation | Angled / right-angle | |
| Mating direction | Horizontal, parallel to PCB | |
| Connector shrouding | Four-sided | |
| Solder pin cross-section | 1.2 × 1.2 mm | |
| Solder tail length | Approximately 3.8 mm | |
| Insulation height | 8.4 mm | |
| Housing material | Polyamide PA66 | |
| Contact material | Electrolytic copper | |
| Contact plating | Tin | |
| Flammability classification | UL94 V-0 | |
| Temperature range | −60 to +100 °C | |
| Coding capability | Integrated coding fingers | |
| Applicable standards and approvals | IEC 61984, UL 1059, UL 1977 and CSA approvals, subject to applicable conditions | |
| Country of origin | Germany | |
| RoHS status | Compliant | |
| PCB footprint | Refer to the manufacturer's dimensional drawing for hole diameter, spacing and mechanical tolerances | |
| Compatible connector system | WAGO MCS MIDI Classic, matching 4-pole female connectors with 7.62 mm pitch |
The WAGO 231-964/001-000 is a 4-pole angled male PCB header used to create detachable electrical connections between printed circuit boards and compatible female connectors in industrial automation, control electronics and machinery.
The header has 4 poles arranged in a single row with a 7.62 mm contact pitch. Each pole provides a separate electrical connection through a solder pin.
The WAGO 231-964/001-000 has an IEC rated current of 16 A, with rated voltages of 500 V under category III/3, 630 V under category III/2 and 1000 V under category II/2 conditions. Its UL ratings are 15 A and 600 V.
The connector uses through-hole technology (THT) with four 1.2 × 1.2 mm square solder pins and an approximately 3.8 mm solder tail length. The pins are inserted into correctly specified PCB holes and soldered into position.
Both are 4-pole angled male PCB headers with a 7.62 mm contact pitch. The 231-964/001-000 uses larger 1.2 × 1.2 mm solder pins and has a 16 A IEC rated current, whereas the 231-934/001-000 uses 1 × 1 mm solder pins and has a 12 A IEC rated current. PCB hole dimensions and the complete connector assembly ratings must be checked before substitution.
WAGO MCS MIDI Classic connectors provide dependable electrical interconnections for industrial automation, PCB manufacturing and machine building. The WAGO 231-964/001-000 combines a 4-pole male interface, 7.62 mm contact pitch, robust 1.2 × 1.2 mm angled through-hole solder pins and a flame-retardant orange housing to support reliable modular industrial electronic assemblies.
We use cookies
We use essential cookies to run this site, your basket and checkout. With your permission we'd also like to use analytics and advertising cookies to understand how the site is used and to measure our adverts.