Standard delivery
£8 ex VAT · free over £200UK parcel delivery is £8 ex VAT, or free on orders over £200 ex VAT.
Heavier items may be charged at a weight-based or pallet rate, shown at checkout.
£0.6885
The WAGO 231-963/001-000 is a robust 3-pole angled through-hole (THT) male PCB header from the WAGO MCS MIDI Classic 231 Series. Designed for reliable printed circuit board connections, this industrial connector combines 7.62 mm contact spacing, substantial 1.2 × 1.2 mm square solder pins and a distinctive orange insulating housing. Its pluggable construction provides a convenient electrical interface between PCB-mounted equipment and compatible female connectors.
The connector's right-angle configuration allows a compatible female plug to mate parallel to the PCB surface. This makes the WAGO 231-963/001-000 particularly useful in compact industrial controllers, machine control electronics and equipment enclosures where horizontal cable routing, convenient side access or restricted vertical clearance must be considered.
With three independent electrical poles, an IEC rated current of 16 A and voltage ratings of up to 1,000 V under specified IEC insulation conditions, this male PCB header offers a practical solution for modular power and control connections. Its tin-plated electrolytic copper contacts, polyamide PA66 housing and integrated coding fingers support dependable assembly and servicing of industrial electronic equipment.
The WAGO 231-963/001-000 uses through-hole technology to create permanent electrical and mechanical connections to a printed circuit board. Its three 1.2 × 1.2 mm square solder pins are inserted through appropriately designed PCB holes and soldered using a suitable manufacturing process.
The substantial solder pin dimensions support a 16 A IEC rated current under the specified conditions. Each solder pin provides one independent electrical potential, allowing three separate circuits to connect through a single pluggable interface.
The right-angle construction positions the male mating interface parallel to the PCB surface. This enables compatible female connectors to approach from the side of the board, making the header particularly useful where equipment height is restricted or where horizontal cable routing improves accessibility.
With 7.62 mm contact spacing, the header provides a detachable connection interface for a suitably matched female plug. The 3.8 mm solder pin length is an important consideration when preparing PCB footprints and selecting a suitable soldering process. Final drilled-hole dimensions, copper pad geometry and board clearances should be checked against the manufacturer's dimensional drawing.
The WAGO MCS MIDI Classic system separates permanent PCB solder connections from detachable field-wiring connections. Compatible female connectors may incorporate CAGE CLAMP® spring pressure technology for conductor termination. The 231-963/001-000 itself does not use CAGE CLAMP termination; it connects directly to the PCB through solder pins.
The connector includes coding fingers that support configurable mating arrangements. When used with appropriately configured female connectors, coding can help distinguish electrical interfaces and reduce the likelihood of incorrect connections during equipment assembly or maintenance. Anti-rotation protection further supports correct mechanical positioning.
Its tin-plated electrolytic copper contacts provide reliable electrical conductivity, while the orange PA66 housing provides insulation and mechanical support. The housing has a UL 94 V-0 flammability classification, and the connector is specified for a temperature range of −60 to +100 °C. Designers must also consider temperature rise, circuit loading and the ratings of the complete mated assembly.
The WAGO 231-963/001-000 is not intended to function as a load-breaking device. Electrical circuits should be safely isolated and verified as de-energised before mating or unmating unless the complete connector system is specifically approved for another procedure. Equipment designers must also prevent hazardous access to energised male contacts when the mating connector is removed.
Tick the specs you need, then view products that match.
| Current | 16 A | |
|---|---|---|
| Voltage | 630 V | |
| Product Series | WAGO 231 | |
| Rated surge voltage | 6 kV | |
| Number of plug-in contact rows | 1 | |
| Flammability class of insulation material according to UL 94 | V0 | |
| Operating temperature | -60 – 100 °C | |
| Rated current In | 16 A | |
| Material insulation body | Thermoplastic | |
| Housing colour | Orange | |
| Modular spacing contacts | 7.62 mm | |
| Angle PCB/contact | 0°/180° (horizontal) | |
| Contact type | Pin | |
| Type of electric connection | Soldering connection | |
| Type of fastening | Solder | |
| Type of connection | Flexible PCB-connector | |
| Length pin | 3.8 mm | |
| Modular spacing connections | 7.62 mm | |
| Number of poles | 3 | |
| Connector model | Free connector | |
| Suitable for PCB thickness | 1.5 mm | |
| Type of banding | None | |
| Rated voltage | 630 V | |
| Material of contact surface | Tin | |
| Pollution degree | 2 | |
| Overvoltage category | III | |
| Type of PCB fastening | Connecting contact | |
| Manufacturer | WAGO | |
| Manufacturer Part Number | 231-963/001-000 | |
| Series | MCS MIDI Classic 231 Series | |
| Product type | Angled THT male PCB header | |
| Connector gender | Male | |
| Number of electrical potentials | 3 | |
| Number of connection levels | 1 | |
| Number of contact rows | 1 | |
| PCB connection technology | Through-hole technology (THT) | |
| Termination method | Solder connection | |
| Connector orientation | Angled / right-angle | |
| Mating direction relative to PCB | 0° (parallel to PCB) | |
| Solder pin cross-section | 1.2 × 1.2 mm | |
| Solder pin length | 3.8 mm | |
| Solder pin arrangement | Single in-line row | |
| Solder pins per potential | 1 | |
| Contact pitch | 7.62 mm / 0.3 inches | |
| Rated current (IEC) | 16 A | |
| Rated voltage (IEC, III/3) | 500 V | |
| Rated voltage (IEC, III/2) | 630 V | |
| Rated voltage (IEC, II/2) | 1,000 V | |
| Rated impulse voltage (IEC) | 6 kV | |
| Rated current (UL) | 15 A under applicable approval conditions | |
| Rated voltage (UL) | 600 V under applicable approval conditions | |
| Contact configuration | Four-sided shrouded | |
| Mating connector | Compatible WAGO female connector with matching pitch, pole count and mechanical configuration | |
| Coding | Integrated coding fingers | |
| Anti-rotation protection | Yes | |
| Contact material | Electrolytic copper | |
| Contact plating | Tin | |
| Housing material | Polyamide PA66 | |
| Flammability classification | UL 94 V-0 | |
| Specified temperature range | −60 to +100 °C | |
| Width | 23.24 mm | |
| Height | 12.2 mm | |
| Height above PCB surface | 8.4 mm | |
| Depth | 12 mm | |
| Dimensions (W × H × D) | 23.24 × 12.2 × 12 mm | |
| GTIN / EAN | 4044918932387 | |
| Standard packaging unit | 200 pieces | |
| Country of origin | Germany | |
| Relevant standards and approvals | IEC/EN 60664-1, UL 1059 and UL 1977, subject to applicable approval conditions |
The WAGO 231-963/001-000 is a 3-pole angled THT male PCB header used to create detachable electrical connections between printed circuit boards and compatible female connectors. It is suitable for industrial automation equipment, electronic controllers, machinery and modular electrical assemblies.
The connector features 3 electrical poles with a 7.62 mm contact pitch. Its three male contacts are arranged in a single row, providing three independent electrical connections through one pluggable interface.
The connector features 1.2 × 1.2 mm square solder pins with a 3.8 mm pin length. The final PCB drilled-hole dimensions and pad layout should be verified against the manufacturer's dimensional drawing before production.
The WAGO 231-963/001-000 has an IEC rated current of 16 A. Its IEC voltage ratings are 500 V under category III/3, 630 V under category III/2 and 1,000 V under category II/2 conditions. Applicable UL ratings include 600 V and 15 A. The permitted operating ratings depend on the complete mated connection and installation conditions.
Both products are angled THT male PCB headers from the WAGO MCS MIDI Classic 231 Series with 7.62 mm contact spacing, 1.2 × 1.2 mm solder pins and orange housings. The 231-963/001-000 has 3 poles, while the 231-962/001-000 has 2 poles. The three-pole version is wider and provides an additional independent electrical connection.
WAGO MCS MIDI Classic connectors are designed for dependable, modular electrical interconnections in industrial automation, machinery and electronic equipment. The WAGO 231-963/001-000 combines a practical three-pole configuration, substantial 1.2 × 1.2 mm through-hole solder pins and an angled pluggable male interface to provide a robust PCB-to-cable connection solution for industrial electronic assemblies.
We use cookies
We use essential cookies to run this site, your basket and checkout. With your permission we'd also like to use analytics and advertising cookies to understand how the site is used and to measure our adverts.