Standard delivery
£8 ex VAT · free over £200UK parcel delivery is £8 ex VAT, or free on orders over £200 ex VAT.
Heavier items may be charged at a weight-based or pallet rate, shown at checkout.
£0.544
The WAGO 231-962/001-000 is a high-quality 2-pole angled through-hole (THT) male PCB header from the WAGO MCS MIDI Classic 231 Series. Designed for reliable industrial PCB-to-cable connections, it combines 7.62 mm contact spacing, robust 1.2 × 1.2 mm square solder pins and a distinctive orange insulating housing.
Its right-angle construction allows a compatible female connector to mate parallel to the printed circuit board, making it particularly suitable for compact electronic equipment, industrial controllers and machinery interfaces where horizontal cable routing or limited vertical clearance is important.
With two independent electrical poles, a 16 A IEC rated current and an IEC voltage rating of up to 1,000 V under specified insulation conditions, the WAGO 231-962/001-000 offers a dependable solution for modular electrical connections. Its tin-plated electrolytic copper contacts, polyamide PA66 housing and integrated coding features support efficient assembly and maintenance of industrial electronic systems.
The WAGO 231-962/001-000 uses through-hole technology to create permanent electrical and mechanical connections to a printed circuit board. Its two 1.2 × 1.2 mm square solder pins are inserted into appropriately designed PCB holes and soldered using a suitable manufacturing process.
The substantial solder pin cross-section supports a 16 A IEC rated current under the specified conditions. Each pin provides an independent electrical potential, allowing two circuits to connect through a single pluggable interface. The larger solder pins also offer a mechanically substantial termination for compact industrial PCB assemblies.
The right-angle construction positions the mating interface parallel to the PCB surface. This allows compatible female connectors to approach from the side of the PCB, making the header particularly useful where enclosure height is restricted or where horizontal cable routing improves equipment layout.
With 7.62 mm spacing between adjacent contacts, the header provides a detachable interface for a suitably matched female connector. The approximately 3.8 mm solder pin length is an important consideration when preparing the PCB footprint and selecting a suitable soldering process. The final hole dimensions and copper pad layout should be checked against the manufacturer's dimensional drawing.
The WAGO MCS MIDI Classic system separates permanent PCB solder connections from detachable field-wiring connections. Compatible female connectors may incorporate CAGE CLAMP® spring pressure technology for conductor termination. The 231-962/001-000 itself does not use CAGE CLAMP termination; it connects directly to the PCB through its solder pins.
The header includes coding fingers that support configurable mating arrangements. When used with appropriately configured female connectors, coding can help distinguish electrical interfaces and reduce the likelihood of incorrect connections during equipment assembly or maintenance.
The connector uses tin-plated electrolytic copper contacts for electrical conductivity and an orange PA66 housing for mechanical support and insulation. The housing has a UL 94 V-0 flammability classification, while the specified material temperature range is −60 to +100 °C. This range should not be interpreted as an unrestricted operating temperature rating for the complete electrical assembly.
The WAGO MCS connector system is not intended to function as a load-breaking device. The 231-962/001-000 must not be connected or disconnected while live or under load. Circuit design should also ensure that accessible male header contacts cannot remain hazardous when the mating connector is removed.
Tick the specs you need, then view products that match.
| Current | 16 A | |
|---|---|---|
| Voltage | 630 V | |
| Product Series | WAGO 231 | |
| Rated surge voltage | 6 kV | |
| Number of plug-in contact rows | 1 | |
| Flammability class of insulation material according to UL 94 | V0 | |
| Operating temperature | -60 – 100 °C | |
| Rated current In | 16 A | |
| Material insulation body | Thermoplastic | |
| Housing colour | Orange | |
| Modular spacing contacts | 7.62 mm | |
| Angle PCB/contact | 0°/180° (horizontal) | |
| Contact type | Pin | |
| Type of electric connection | Soldering connection | |
| Type of fastening | Solder | |
| Type of connection | Flexible PCB-connector | |
| Length pin | 3.8 mm | |
| Modular spacing connections | 7.62 mm | |
| Number of poles | 2 | |
| Connector model | Free connector | |
| Suitable for PCB thickness | 1.5 mm | |
| Type of banding | None | |
| Rated voltage | 630 V | |
| Material of contact surface | Tin | |
| Pollution degree | 2 | |
| Overvoltage category | III | |
| Type of PCB fastening | Connecting contact | |
| Manufacturer | WAGO | |
| Manufacturer Part Number | 231-962/001-000 | |
| Series | MCS MIDI Classic 231 Series | |
| Product type | Angled THT male PCB header | |
| Connector gender | Male | |
| Number of electrical potentials | 2 | |
| Number of connection levels | 1 | |
| Number of contact rows | 1 | |
| PCB mounting technology | Through-hole technology (THT) | |
| Termination method | Solder connection | |
| Connector orientation | Angled / right-angle | |
| Mating direction relative to PCB | Parallel to PCB surface | |
| Solder pin cross-section | 1.2 × 1.2 mm | |
| Solder pin length | Approximately 3.8 mm | |
| Contact pitch | 7.62 mm / 0.3 inches | |
| Contact arrangement | Single row | |
| Rated current (IEC) | 16 A | |
| Rated voltage (IEC, category II/2) | 1,000 V | |
| Rated impulse voltage (IEC, category II/2) | 6 kV | |
| Rated current (UL) | 15 A under applicable approval conditions | |
| Rated voltage (UL) | Up to 600 V under applicable approval conditions | |
| Contact configuration | Shrouded on four sides | |
| Mating connector | Compatible WAGO female connector with matching pole count, pitch and mechanical configuration | |
| Coding | Integrated coding fingers | |
| Anti-rotation protection | Yes | |
| Contact material | Electrolytic copper | |
| Contact plating | Tin | |
| Housing material | Polyamide PA66 | |
| Flammability classification | UL 94 V-0 | |
| Material temperature range | −60 to +100 °C | |
| Width | 15.82 mm | |
| Height | 12.2 mm | |
| Depth | 12 mm | |
| Dimensions (W × H × D) | 15.82 × 12.2 × 12 mm | |
| Weight | Approximately 1.0 g | |
| GTIN / EAN | 4044918932363 | |
| Relevant standards and approvals | IEC/EN 60664-1, UL 1059, UL 1977 and CSA, subject to applicable approval conditions |
The WAGO 231-962/001-000 is a 2-pole angled THT male PCB header designed to create detachable electrical connections between printed circuit boards and compatible female connectors. It is suitable for industrial automation equipment, electronic controllers, machinery and modular electrical assemblies.
The connector features 2 electrical poles with a 7.62 mm contact pitch. Its two male contacts are arranged in a single row, providing two independent electrical connections through one pluggable interface.
The connector features 1.2 × 1.2 mm square solder pins with an approximately 3.8 mm pin length. The final PCB hole dimensions and pad layout should be verified against the manufacturer's dimensional drawing before production.
The WAGO 231-962/001-000 has an IEC rated current of 16 A and an IEC voltage rating of up to 1,000 V under category II/2 conditions. Applicable UL ratings include 600 V and 15 A under the relevant approval conditions. The permitted operating ratings depend on the complete mated connection and installation environment.
Both products are 2-pole angled THT male PCB headers from the WAGO MCS MIDI Classic 231 Series with 7.62 mm contact spacing and orange housings. The 231-962/001-000 uses larger 1.2 × 1.2 mm solder pins and has a 16 A IEC rated current, while the 231-932/001-000 uses 1.0 × 1.0 mm solder pins and has a 12 A IEC rated current. Their PCB footprints must be checked separately because the solder pin dimensions differ.
WAGO MCS MIDI Classic connectors are engineered for dependable, modular electrical interconnections in industrial automation, machinery and electronic equipment. The WAGO 231-962/001-000 combines a compact two-pole configuration, substantial 1.2 × 1.2 mm through-hole solder pins and an angled pluggable male interface to provide a practical PCB-to-cable connection solution for industrial electronic assemblies.
We use cookies
We use essential cookies to run this site, your basket and checkout. With your permission we'd also like to use analytics and advertising cookies to understand how the site is used and to measure our adverts.