Standard delivery
£8 ex VAT · free over £200UK parcel delivery is £8 ex VAT, or free on orders over £200 ex VAT.
Heavier items may be charged at a weight-based or pallet rate, shown at checkout.
£2.35
The WAGO 231-942/001-000 is a high-quality 12-pole angled male PCB header from the WAGO MCS MIDI Classic 231 series, designed to provide dependable detachable electrical connections between printed circuit boards and compatible female connectors. Featuring a 7.62 mm contact pitch, through-hole technology (THT) and an orange insulating housing, this connector is well suited to industrial automation, machinery control systems and electronic equipment.
Its right-angle, shrouded construction allows compatible connectors to mate parallel to the PCB surface, making it particularly useful for horizontal cable routing and space-conscious electronic assemblies. The header incorporates 1.0 × 1.0 mm square solder pins with a 3.8 mm contact tail length, providing a permanent soldered connection to the printed circuit board while retaining a detachable mating interface.
With a rated current of 12 A under IEC conditions, a maximum listed IEC voltage rating of 1000 V under specified insulation coordination conditions and a 10 A / 600 V UL rating, the WAGO 231-942/001-000 provides a practical connection solution for industrial PCB applications. Tin-plated electrolytic copper contacts, flame-retardant polyamide insulation and integrated coding fingers contribute to reliable electrical connectivity and efficient equipment assembly.
The WAGO MCS MIDI Classic series provides a versatile modular connection system for industrial electronics, automation equipment and machinery. Its range of male PCB headers and compatible female connectors allows manufacturers to establish detachable PCB-to-cable interfaces without permanently soldering external conductors directly to the circuit board.
The WAGO 231-942/001-000 uses a right-angle through-hole design, enabling a compatible female connector to engage parallel to the PCB surface. This arrangement is especially useful where enclosure geometry, internal component positioning or cable routing makes horizontal access preferable to a vertically mounted connector.
Its twelve male contacts at 7.62 mm spacing provide independent electrical connections for suitable industrial power and control circuits. The tin-plated copper contacts support reliable conductivity, while the square solder pins provide a permanent mechanical and electrical connection to the printed circuit board.
The orange polyamide 66 housing provides electrical insulation and mechanical support for the contacts. Its four-sided shrouded construction helps protect the male contact arrangement, while integrated coding fingers support appropriate connector coding configurations. Compatible female connectors can be disconnected for equipment servicing once the electrical circuit has been safely isolated.
When selecting a mating connector, the 12-pole configuration, 7.62 mm pitch, mechanical geometry and coding arrangement must be compatible. The MCS MIDI Classic system is not intended for load-breaking operation, and connectors must not be connected or disconnected while live or under load. Circuit design must also prevent accessible male header contacts from remaining energised when unmated.
Tick the specs you need, then view products that match.
| Current | 12 A | |
|---|---|---|
| Voltage | 630 V | |
| Product Series | WAGO 231 | |
| Rated surge voltage | 6 kV | |
| Number of plug-in contact rows | 1 | |
| Flammability class of insulation material according to UL 94 | V0 | |
| Operating temperature | -60 – 100 °C | |
| Rated current In | 12 A | |
| Material insulation body | Thermoplastic | |
| Housing colour | Orange | |
| Modular spacing contacts | 7.62 mm | |
| Angle PCB/contact | 0°/180° (horizontal) | |
| Contact type | Pin | |
| Type of electric connection | Soldering connection | |
| Type of fastening | Solder | |
| Type of connection | Flexible PCB-connector | |
| Length pin | 3.8 mm | |
| Modular spacing connections | 7.62 mm | |
| Number of poles | 12 | |
| Connector model | Free connector | |
| Suitable for PCB thickness | 1.5 mm | |
| Type of banding | None | |
| Rated voltage | 630 V | |
| Material of contact surface | Tin | |
| Pollution degree | 2 | |
| Overvoltage category | III | |
| Type of PCB fastening | Connecting contact | |
| Manufacturer | WAGO | |
| Manufacturer Part Number | 231-942/001-000 | |
| Product Series | MCS MIDI Classic 231 | |
| Product Type | Angled male PCB header | |
| Connector Gender | Male | |
| Number of Contact Positions | 12 | |
| Number of Rows | 1 | |
| Number of Levels | 1 | |
| Contact Pitch | 7.62 mm | |
| Rated Current (IEC) | 12 A | |
| Rated Current (UL) | 10 A | |
| Maximum Listed Rated Voltage (IEC) | 1000 V, subject to insulation coordination conditions | |
| Rated Voltage (UL) | 600 V | |
| PCB Contact Technology | Through-hole technology (THT) | |
| Termination Method | Solder connection | |
| Mounting Type | Through-hole PCB mounting | |
| Header Orientation | 90° / right-angle | |
| Mating Direction | Parallel to PCB surface | |
| Contact Configuration | Male pins, four-sided shrouded | |
| Solder Pin Cross-Section | 1.0 × 1.0 mm | |
| Solder Pin Length | 3.8 mm | |
| Insulation Height | 8.4 mm | |
| Contact Material | Electrolytic copper | |
| Contact Plating | Tin | |
| Housing Material | Polyamide 66 (PA66) | |
| Flammability Classification | UL 94 V-0 | |
| Minimum Temperature | −60 °C | |
| Maximum Temperature | +100 °C | |
| Integrated Coding Fingers | Yes | |
| Relevant Standards and Approvals | IEC/EN 60664-1, UL 1059, UL 1977 and CSA | |
| Manufacturer Standard Packaging | Box |
The WAGO 231-942/001-000 is a 12-pole angled male PCB header used to provide detachable electrical connections between printed circuit boards and compatible female connectors in industrial automation, machinery and electronic control equipment.
The header has an IEC rated current of 12 A and a UL rated current of 10 A. The permissible current of the complete connector assembly also depends on the mating connector, PCB design and operating conditions.
The connector features a 7.62 mm contact pitch, with twelve male contacts arranged in a single row.
It is an angled, right-angle male PCB header. The mating connector engages parallel to the PCB surface, making the design suitable for horizontal cable connections.
The connector uses through-hole technology (THT). Its 1.0 × 1.0 mm square solder pins are inserted into corresponding PCB holes and soldered to create a permanent electrical and mechanical connection. The solder pins have a length of 3.8 mm.
The header has a maximum listed IEC rated voltage of 1000 V under specified insulation coordination conditions and a UL rated voltage of 600 V. The applicable operating voltage depends on the relevant standard, overvoltage category, pollution degree and installation requirements.
Both are orange, angled male PCB headers from the WAGO MCS MIDI Classic series with a 7.62 mm contact pitch. The 231-940/001-000 has 10 poles, whereas the 231-942/001-000 has 12 poles, providing two additional electrical connection positions.
No. The 231-942/001-000 is a solder-mounted male PCB header and does not directly accept external conductors. Compatible female connectors in the MCS MIDI Classic system may use WAGO CAGE CLAMP® spring-pressure technology for conductor termination.
The header has a specified temperature range of −60 to +100 °C. The temperature limitations of the complete PCB assembly and mating connector must also be considered.
No. The WAGO MCS MIDI Classic connector system does not provide load-breaking capacity. Connectors must not be mated or unmated while live or under load, and accessible male header contacts must not remain energised when disconnected.
WAGO MCS MIDI Classic connectors provide dependable electrical interfaces for industrial automation, machinery and electronic equipment. The 231-942/001-000 combines a 12-pole angled PCB header design, 7.62 mm contact pitch, robust through-hole solder termination and tin-plated copper contacts to support reliable PCB connectivity, efficient equipment assembly and straightforward maintenance.
We use cookies
We use essential cookies to run this site, your basket and checkout. With your permission we'd also like to use analytics and advertising cookies to understand how the site is used and to measure our adverts.