Standard delivery
£8 ex VAT · free over £200UK parcel delivery is £8 ex VAT, or free on orders over £200 ex VAT.
Heavier items may be charged at a weight-based or pallet rate, shown at checkout.
£1.90
The WAGO 231-940/001-000 is a high-quality 10-pole angled male PCB header from the WAGO MCS MIDI Classic 231 series, designed to provide reliable detachable electrical connections between printed circuit boards and compatible female connectors. Featuring a 7.62 mm contact pitch, through-hole technology (THT) and an orange insulating housing, this connector is ideal for industrial automation, machinery control systems and electronic equipment.
Designed for horizontal connector mating relative to the PCB, the 231-940/001-000 incorporates 1 × 1 mm square solder pins with a 3.8 mm solder pin length. Its ten individual electrical contacts allow multiple circuits to be connected through one compact assembly, while the angled construction supports convenient cable routing and efficient use of space within electrical enclosures.
With a rated current of 12 A under IEC conditions and voltage ratings of up to 1000 V under specified IEC insulation coordination conditions, this male header provides dependable performance in industrial PCB applications. Tin-plated electrolytic copper contacts, flame-retardant polyamide insulation and integrated coding fingers contribute to reliable electrical connectivity and straightforward equipment assembly.
The WAGO MCS MIDI Classic series provides a modular solution for detachable electrical connections in industrial electronic equipment. Its range of PCB headers and compatible female connectors allows equipment manufacturers to establish reliable PCB-to-cable interfaces without permanently soldering external wiring directly to the circuit board.
The WAGO 231-940/001-000 uses an angled through-hole design, allowing a compatible female connector to mate parallel to the PCB surface. This arrangement is particularly beneficial where enclosure dimensions, internal component positioning or cable routing make horizontal connections preferable to vertical PCB headers.
Its ten contacts at 7.62 mm spacing provide separate electrical connections for suitable industrial power and control circuits. The square solder pins create a permanent mechanical and electrical interface with the PCB, while the detachable mating connector supports modular equipment assembly, servicing and replacement.
The orange polyamide housing provides electrical insulation and mechanical support for the tin-plated contacts. Integrated coding fingers allow compatible coding arrangements to be implemented, helping distinguish connector positions where appropriate coding accessories and mating components are used.
When selecting a mating connector, the pole count, 7.62 mm pitch, connector geometry and coding arrangement must be compatible. The MCS MIDI Classic system is not designed for load-breaking operation, and connectors must not be mated or unmated while live or under load. Equipment design must also ensure accessible header contacts are not energised when disconnected.
Tick the specs you need, then view products that match.
| Current | 12 A | |
|---|---|---|
| Voltage | 630 V | |
| Product Series | WAGO 231 | |
| Rated surge voltage | 6 kV | |
| Number of plug-in contact rows | 1 | |
| Flammability class of insulation material according to UL 94 | V0 | |
| Operating temperature | -60 – 100 °C | |
| Rated current In | 12 A | |
| Material insulation body | Thermoplastic | |
| Housing colour | Orange | |
| Modular spacing contacts | 7.62 mm | |
| Angle PCB/contact | 0°/180° (horizontal) | |
| Contact type | Pin | |
| Type of electric connection | Soldering connection | |
| Type of fastening | Solder | |
| Type of connection | Flexible PCB-connector | |
| Length pin | 3.8 mm | |
| Modular spacing connections | 7.62 mm | |
| Number of poles | 10 | |
| Connector model | Free connector | |
| Suitable for PCB thickness | 1.5 mm | |
| Type of banding | None | |
| Rated voltage | 630 V | |
| Material of contact surface | Tin | |
| Pollution degree | 2 | |
| Overvoltage category | III | |
| Type of PCB fastening | Connecting contact | |
| Manufacturer | WAGO | |
| Manufacturer Part Number | 231-940/001-000 | |
| Series | MCS MIDI Classic 231 | |
| Product Type | Angled male PCB header | |
| Connector Gender | Male | |
| Number of Electrical Contacts | 10 | |
| Number of Rows | 1 | |
| Contact Pitch | 7.62 mm | |
| Rated Current (IEC) | 12 A | |
| Rated Current (UL 1059, Groups B and D) | 10 A | |
| Rated Voltage (IEC, III/3) | 500 V | |
| Rated Voltage (IEC, III/2) | 630 V | |
| Rated Voltage (IEC, II/2) | 1000 V | |
| Rated Voltage (UL 1059, Groups B and D) | 300 V | |
| Rated Voltage (UL 1977) | 600 V | |
| Rated Current (UL 1977) | 10 A | |
| Rated Impulse Withstand Voltage | 6 kV | |
| PCB Contact Technology | Through-hole technology (THT) | |
| Termination Method | Solder connection | |
| Mounting Type | Through-hole PCB mounting | |
| Header Orientation | Angled / right-angle | |
| Mating Direction Relative to PCB | 0° (parallel) | |
| Solder Pin Dimensions | 1 × 1 mm | |
| Solder Pin Length | 3.8 mm | |
| Recommended Drilled Hole Diameter | 1.4 mm (+0.1 mm) | |
| Number of Solder Pins per Potential | 1 | |
| Solder Pin Arrangement | In-line across the male connector | |
| Width | 76.78 mm | |
| Height | 12.2 mm | |
| Height Above PCB Surface | 8.4 mm | |
| Depth | 12 mm | |
| Weight | Approximately 3.91 g | |
| Contact Material | Electrolytic copper | |
| Contact Plating | Tin | |
| Housing Material | Polyamide 66 (PA66) | |
| Flammability Classification | UL 94 V-0 | |
| Temperature Limit Range | −60 to +100 °C | |
| Insulating Material Group | I | |
| Integrated Coding Fingers | Yes | |
| Dedicated Mismating Protection | No | |
| Integrated Connector Locking | No | |
| Standards and Approvals | IEC/EN 60664-1, IEC 61984, UL 1059, UL 1977, CSA | |
| GTIN / EAN | 4044918868648 | |
| Manufacturer Packaging Unit | 50 pieces |
The WAGO 231-940/001-000 is a 10-pole angled male PCB header designed to provide detachable electrical connections between printed circuit boards and compatible female connectors in industrial automation, machinery and electronic control equipment.
The header has an IEC rated current of 12 A and a UL rated current of 10 A under the specified approval conditions. The permissible current of the complete assembly also depends on the mating connector, PCB design and operating conditions.
The connector features a 7.62 mm contact pitch, with ten contacts arranged in a single row.
It is an angled, right-angle male PCB header. Its mating direction is parallel to the PCB surface, making it suitable for horizontal cable connections.
The connector uses through-hole technology (THT). Its 1 × 1 mm square solder pins are inserted into corresponding PCB holes and soldered to create a permanent electrical and mechanical connection. The solder pins have a length of 3.8 mm.
The connector has IEC ratings of 500 V under category III/3, 630 V under category III/2 and 1000 V under category II/2. The applicable rating depends on the installation's overvoltage category, pollution degree and insulation coordination requirements.
Both are 10-pole male PCB headers with a 7.62 mm contact pitch. The 231-940/001-000 is the angled version with horizontal mating and 3.8 mm solder pins, whereas the 231-740/001-000 is the straight-pin version with vertical mating and 5 mm solder pins.
No. The 231-940/001-000 is a solder-mounted male PCB header and does not directly accept external conductors. Compatible female connectors in the MCS MIDI Classic system may use WAGO CAGE CLAMP® spring-pressure technology for conductor termination.
The header has a specified temperature limit range of −60 to +100 °C. The operating limits of the complete PCB assembly and mating connector must also be considered.
No. The WAGO MCS MIDI Classic connector system does not provide load-breaking capacity. Connectors must not be mated or unmated while live or under load, and accessible male header contacts must not remain energised when disconnected.
WAGO MCS MIDI Classic connectors provide dependable electrical interfaces for industrial automation, machinery and electronic equipment. The 231-940/001-000 combines a 10-pole angled PCB header design, 7.62 mm contact pitch, robust through-hole solder termination and tin-plated copper contacts to support reliable PCB connections, efficient equipment assembly and straightforward maintenance.
We use cookies
We use essential cookies to run this site, your basket and checkout. With your permission we'd also like to use analytics and advertising cookies to understand how the site is used and to measure our adverts.