Standard delivery
£8 ex VAT · free over £200UK parcel delivery is £8 ex VAT, or free on orders over £200 ex VAT.
Heavier items may be charged at a weight-based or pallet rate, shown at checkout.
£1.71
The WAGO 231-939/001-000 is a professional 9-pole angled male PCB header designed to provide reliable, detachable electrical connections between printed circuit boards and compatible pluggable female connectors. Part of the WAGO MCS MIDI Classic 231 Series, this connector features a 7.62 mm contact pitch, 1 × 1 mm square solder pins and a durable orange polyamide housing, making it suitable for industrial automation, electronic control systems and machinery manufacturing.
Its right-angle configuration allows compatible female connectors to mate horizontally, parallel to the PCB surface. This arrangement is particularly beneficial in equipment where vertical clearance, cable routing and maintenance access are important. The header uses through-hole technology (THT) with solder termination, creating a mechanically secure board-mounted interface while allowing connected cable assemblies to be detached when the circuit is safely de-energised.
With an IEC rated current of 12 A, an IEC voltage rating of up to 1000 V under the applicable insulation coordination conditions and 10 A / 600 V UL ratings, the WAGO 231-939/001-000 is designed for industrial signal, control and power connections within its specified limits. Its tin-plated electrolytic copper contacts, four-sided shrouded construction and UL94 V-0 flame-retardant housing support dependable performance in industrial electronic assemblies.
The WAGO 231-939/001-000 provides a dependable through-hole PCB connection interface for industrial electronic equipment. Its nine 1 × 1 mm square solder pins are designed for insertion into appropriately specified PCB holes and permanent solder termination, establishing a stable electrical and mechanical connection between the header and the printed circuit board.
Unlike cable-side female connectors equipped with CAGE CLAMP® spring pressure terminals, the 231-939/001-000 is a male PCB header with solder pins. It forms the board-mounted side of a detachable connection assembly and is intended for mating with compatible WAGO MCS MIDI Classic female connectors. Its right-angle construction allows external wiring to approach horizontally, helping designers optimise equipment layout and cable access.
The 7.62 mm contact pitch, shrouded contact housing and tin-plated copper contacts support guided connector engagement and reliable electrical conductivity. Its orange PA66 housing provides flame-retardant insulation suitable for industrial electronics. As this connector system has no load-breaking capability, the connection must not be mated or unmated while live or under load, and exposed header pins must be protected against hazardous voltages when disconnected.
Tick the specs you need, then view products that match.
| Current | 12 A | |
|---|---|---|
| Voltage | 630 V | |
| Product Series | WAGO 231 | |
| Rated surge voltage | 6 kV | |
| Number of plug-in contact rows | 1 | |
| Flammability class of insulation material according to UL 94 | V0 | |
| Operating temperature | -60 – 100 °C | |
| Rated current In | 12 A | |
| Material insulation body | Thermoplastic | |
| Housing colour | Orange | |
| Modular spacing contacts | 7.62 mm | |
| Angle PCB/contact | 0°/180° (horizontal) | |
| Contact type | Pin | |
| Type of electric connection | Soldering connection | |
| Type of fastening | Solder | |
| Type of connection | Flexible PCB-connector | |
| Length pin | 3.8 mm | |
| Modular spacing connections | 7.62 mm | |
| Number of poles | 9 | |
| Connector model | Free connector | |
| Suitable for PCB thickness | 1.5 mm | |
| Type of banding | None | |
| Rated voltage | 630 V | |
| Material of contact surface | Tin | |
| Pollution degree | 2 | |
| Overvoltage category | III | |
| Type of PCB fastening | Connecting contact | |
| Manufacturer | WAGO | |
| Manufacturer part number | 231-939/001-000 | |
| Series | MCS MIDI Classic 231 Series | |
| Product type | Angled male PCB header | |
| Connector category | Pluggable terminal block header | |
| Connector gender | Male | |
| Number of contacts | 9 | |
| Number of positions per level | 9 | |
| Number of levels | 1 | |
| Number of contact rows | 1 | |
| Contact pitch | 7.62 mm | |
| Contact pitch (imperial) | 0.3 in | |
| Rated current (IEC) | 12 A | |
| Maximum rated voltage (IEC) | 1000 V, subject to insulation coordination conditions | |
| Rated current (UL) | 10 A | |
| Rated voltage (UL) | 600 V | |
| Mounting technology | Through-hole technology (THT) | |
| Termination method | Solder | |
| PCB mounting | Through-hole | |
| Header orientation | Angled / right-angle | |
| Mating direction | Horizontal, parallel to PCB | |
| Connector shrouding | Four-sided | |
| Connector end design | Closed end | |
| Solder pin cross-section | 1 × 1 mm | |
| Solder tail length | Approximately 3.8 mm | |
| Insulation height | 8.4 mm | |
| Housing material | Polyamide PA66 | |
| Contact material | Electrolytic copper | |
| Contact plating | Tin | |
| Flammability classification | UL94 V-0 | |
| Temperature range | −60 to +100 °C | |
| Approximate component weight | 3.5 g | |
| Country of origin | Poland | |
| GTIN / EAN | 4044918868617 | |
| Standard packaging quantity | 50 pieces | |
| PCB footprint | Refer to the manufacturer dimensional drawing for hole spacing and tolerances | |
| Compatible connector system | WAGO MCS MIDI Classic, matching 7.62 mm pitch female connectors | |
| Product reference | WAGO 231-939/001-000 |
The WAGO 231-939/001-000 is a 9-pole angled male PCB header used to provide detachable electrical connections between printed circuit boards and compatible female connectors in industrial automation, control electronics and machinery.
The header features 9 poles arranged in a single row with a 7.62 mm contact pitch. Each position provides an individual electrical connection through a through-hole solder pin.
The WAGO 231-939/001-000 has an IEC rated current of 12 A and a maximum IEC rated voltage of 1000 V under applicable insulation coordination conditions. Its UL ratings are 10 A and 600 V. The ratings of the complete connector assembly must also be considered.
The header uses through-hole technology (THT) with nine 1 × 1 mm square solder pins and an approximately 3.8 mm solder tail length. The pins are inserted into correctly specified PCB holes and soldered into position.
Both are 9-pole angled male PCB headers with a 7.62 mm contact pitch and orange housings. The 231-939/001-000 uses 1 × 1 mm solder pins and has a 12 A IEC rated current, whereas the 231-969/001-000 uses larger 1.2 × 1.2 mm solder pins and has a 16 A IEC rated current. PCB hole dimensions and the complete connection ratings must be checked before substitution.
WAGO MCS MIDI Classic connectors provide dependable electrical interconnections for industrial automation, PCB manufacturing and machine building. The WAGO 231-939/001-000 combines a 9-pole male interface, 7.62 mm contact pitch, angled through-hole solder pins and a flame-retardant orange housing to support reliable, modular industrial electronic assemblies.
We use cookies
We use essential cookies to run this site, your basket and checkout. With your permission we'd also like to use analytics and advertising cookies to understand how the site is used and to measure our adverts.