Standard delivery
£8 ex VAT · free over £200UK parcel delivery is £8 ex VAT, or free on orders over £200 ex VAT.
Heavier items may be charged at a weight-based or pallet rate, shown at checkout.
£1.53
The WAGO 231-938/001-000 is an 8-pole angled male PCB header designed for reliable, detachable electrical connections between printed circuit boards and compatible pluggable female connectors. Part of the WAGO MCS MIDI Classic 231 Series, this orange connector features a 7.62 mm contact pitch, 1 × 1 mm square solder pins and a four-sided shrouded housing, making it suitable for industrial automation, machine control and electronic equipment manufacturing.
Its right-angle configuration allows the mating connector to engage horizontally, parallel to the PCB surface. This arrangement is particularly useful in industrial control assemblies where cable routing, maintenance access and enclosure clearance are important. The header uses through-hole technology (THT) with solder termination, providing a secure board-mounted connection and a detachable interface for external wiring.
With a 12 A IEC rated current and a maximum IEC rated voltage of 1000 V under the applicable insulation coordination conditions, the WAGO 231-938/001-000 supports industrial control, power distribution and signal connections within its specified ratings. Its tin-plated electrolytic copper contacts, flame-retardant PA66 housing and robust solder pin construction make it a dependable solution for modular industrial electronics.
The WAGO 231-938/001-000 provides a dependable through-hole PCB connection interface for industrial electronic equipment. Its eight 1 × 1 mm square solder pins are designed for insertion into correctly specified PCB holes and permanent solder termination, establishing a stable electrical and mechanical connection between the header and the printed circuit board.
Unlike cable-side female connectors that use CAGE CLAMP® spring pressure terminals, the 231-938/001-000 is a male PCB header with solder pins. It forms the board-mounted side of a detachable connection assembly and is intended to mate with compatible WAGO MCS MIDI Classic female connectors. Its right-angle configuration allows the mating cable connector to approach horizontally, helping designers optimise wiring access and enclosure space.
The 7.62 mm contact pitch, shrouded housing and tin-plated contacts support accurate connector engagement and dependable conductivity. The flame-retardant orange PA66 housing provides durable electrical insulation, while the modular design supports convenient maintenance and assembly. The connector must be used within the ratings of the complete connection system and must not be mated or unmated while energised or under load.
Tick the specs you need, then view products that match.
| Current | 12 A | |
|---|---|---|
| Voltage | 630 V | |
| Product Series | WAGO 231 | |
| Rated surge voltage | 6 kV | |
| Number of plug-in contact rows | 1 | |
| Flammability class of insulation material according to UL 94 | V0 | |
| Operating temperature | -60 – 100 °C | |
| Rated current In | 12 A | |
| Material insulation body | Thermoplastic | |
| Housing colour | Orange | |
| Modular spacing contacts | 7.62 mm | |
| Angle PCB/contact | 0°/180° (horizontal) | |
| Contact type | Pin | |
| Type of electric connection | Soldering connection | |
| Type of fastening | Solder | |
| Type of connection | Flexible PCB-connector | |
| Length pin | 3.8 mm | |
| Modular spacing connections | 7.62 mm | |
| Number of poles | 8 | |
| Connector model | Free connector | |
| Suitable for PCB thickness | 1.5 mm | |
| Type of banding | None | |
| Rated voltage | 630 V | |
| Material of contact surface | Tin | |
| Pollution degree | 2 | |
| Overvoltage category | III | |
| Type of PCB fastening | Connecting contact | |
| Manufacturer | WAGO | |
| Manufacturer part number | 231-938/001-000 | |
| Series | MCS MIDI Classic 231 Series | |
| Product type | Angled male PCB header | |
| Connector category | Pluggable terminal block header | |
| Connector gender | Male | |
| Number of contacts | 8 | |
| Number of positions per level | 8 | |
| Number of levels | 1 | |
| Contact arrangement | Single row | |
| Contact pitch | 7.62 mm | |
| Contact pitch (imperial) | 0.3 in | |
| Rated current (IEC) | 12 A | |
| Maximum rated voltage (IEC) | 1000 V, subject to installation conditions | |
| Rated current (UL) | 10 A | |
| Rated voltage (UL) | 600 V | |
| Mounting technology | Through-hole technology (THT) | |
| Termination method | Solder | |
| PCB mounting | Through-hole | |
| Header orientation | Angled / right-angle | |
| Mating direction relative to PCB | 0° | |
| Connector shrouding | Four-sided | |
| Connector end design | Closed end | |
| Solder pin cross-section | 1 × 1 mm | |
| Solder tail length | Approximately 3.8 mm | |
| Insulation height | 8.4 mm | |
| Housing material | Polyamide PA66 | |
| Contact material | Electrolytic copper | |
| Contact plating | Tin | |
| Flammability classification | UL94 V-0 | |
| Operating temperature range | −60 to +100 °C | |
| Approximate component weight | 3.1 g | |
| Standard packaging quantity | 50 pieces | |
| PCB footprint | Refer to the manufacturer dimensional drawing for hole positions and tolerances | |
| Compatible connector system | WAGO MCS MIDI Classic, matching 7.62 mm pitch female connectors | |
| Product reference | WAGO 231-938/001-000 |
The WAGO 231-938/001-000 is an 8-pole angled male PCB header used to provide detachable electrical connections between printed circuit boards and compatible female connectors in industrial automation, control electronics and machinery.
The header features 8 poles arranged in a single row with a 7.62 mm contact pitch. Each position provides an individual electrical connection through a through-hole solder pin.
The WAGO 231-938/001-000 has an IEC rated current of 12 A and a maximum IEC rated voltage of 1000 V under applicable insulation coordination conditions. Its UL ratings are 10 A and 600 V. The ratings of the complete connector assembly must also be considered.
The header uses through-hole technology (THT) with eight 1 × 1 mm square solder pins and an approximately 3.8 mm solder tail length. The pins are inserted into correctly specified PCB holes and soldered into position.
Both are 8-pole angled male PCB headers with 1 × 1 mm solder pins and a 12 A IEC rated current. The 231-938/001-000 has an orange housing and 7.62 mm pitch, whereas the 231-838/001-000 belongs to the grey 7.5 mm pitch variant. Their PCB footprints and mating connector compatibility must be checked before substitution.
WAGO MCS MIDI Classic connectors provide dependable electrical interconnections for industrial automation, PCB manufacturing and machine building. The WAGO 231-938/001-000 combines an 8-pole male interface, 7.62 mm contact pitch, angled through-hole solder pins and a flame-retardant orange housing to support reliable, modular industrial electronic assemblies.
We use cookies
We use essential cookies to run this site, your basket and checkout. With your permission we'd also like to use analytics and advertising cookies to understand how the site is used and to measure our adverts.