Standard delivery
£8 ex VAT · free over £200UK parcel delivery is £8 ex VAT, or free on orders over £200 ex VAT.
Heavier items may be charged at a weight-based or pallet rate, shown at checkout.
£0.544
The WAGO 231-932/001-000 is a high-quality 2-pole angled THT male PCB header from the established WAGO MCS MIDI Classic 231 Series. Designed for dependable printed circuit board connections, this connector features 7.62 mm contact spacing, 1.0 × 1.0 mm square solder pins and a distinctive orange polyamide housing. Its right-angle configuration provides a compact, detachable electrical interface between industrial electronic equipment and compatible female connectors.
Unlike straight PCB headers, the WAGO 231-932/001-000 has an angled mating interface that allows compatible female connectors to engage parallel to the PCB surface. This makes it particularly useful in industrial controllers, machinery interfaces and compact electronic enclosures where horizontal cable routing, convenient side access or limited vertical clearance is important.
With two independent electrical poles, an IEC rated current of 12 A and voltage ratings of up to 1,000 V under specified IEC conditions, this header supports reliable modular electrical connections. Its tin-plated electrolytic copper contacts, polyamide PA66 housing and configurable coding features make it a practical choice for professionally designed industrial PCB assemblies.
The WAGO 231-932/001-000 uses through-hole technology to establish permanent electrical and mechanical connections to a printed circuit board. Its two 1.0 × 1.0 mm square solder pins are inserted into appropriately designed PCB holes and soldered using a suitable manufacturing process.
Each solder pin provides one independent electrical potential. The pins have a specified 3.8 mm length, and the recommended drilled hole diameter is 1.4 mm with a +0.1 mm tolerance. These dimensions are important when designing the PCB footprint and selecting an appropriate soldering process.
The connector's right-angle construction positions its mating interface parallel to the PCB surface. This enables compatible female connectors to approach horizontally, making the header suitable for equipment where cables need to exit towards the side of the board rather than vertically above it.
With 7.62 mm contact spacing, the header provides a detachable interface for a suitably matched female connector. The pluggable arrangement allows external wiring assemblies to be disconnected for servicing while the male header remains permanently soldered to the PCB.
The WAGO MCS MIDI Classic system separates permanent PCB solder connections from detachable field-wiring connections. Compatible female plugs may incorporate CAGE CLAMP® spring pressure technology for conductor termination. The 231-932/001-000 itself does not use CAGE CLAMP termination; its connection to the PCB is made through solder pins.
The header incorporates variable coding and anti-rotation protection. Coding can help distinguish connection points when used with appropriately configured female connectors. However, the header is specified as having no inherent mismating protection, so coding and connector compatibility must be considered during equipment design.
The tin-plated electrolytic copper contacts provide dependable electrical conductivity, while the orange PA66 housing provides electrical insulation and mechanical support. The insulating material has a UL 94 V-0 flammability classification and a material temperature limit range of −60 to +100 °C. This material temperature range should not be interpreted as an unrestricted operating rating for the complete connector assembly.
For safe operation, the WAGO 231-932/001-000 should only be mated or unmated under conditions permitted by the manufacturer. Unless the complete connection system is specifically approved for load-breaking, circuits should be safely de-energised before disconnection. Equipment designers should also ensure that exposed male contacts cannot remain hazardous when the female connector is removed.
Tick the specs you need, then view products that match.
| Current | 12 A | |
|---|---|---|
| Voltage | 630 V | |
| Product Series | WAGO 231 | |
| Rated surge voltage | 6 kV | |
| Number of plug-in contact rows | 1 | |
| Flammability class of insulation material according to UL 94 | V0 | |
| Operating temperature | -60 – 100 °C | |
| Rated current In | 12 A | |
| Material insulation body | Thermoplastic | |
| Housing colour | Orange | |
| Modular spacing contacts | 7.62 mm | |
| Angle PCB/contact | 0°/180° (horizontal) | |
| Contact type | Pin | |
| Type of electric connection | Soldering connection | |
| Type of fastening | Solder | |
| Type of connection | Flexible PCB-connector | |
| Length pin | 3.8 mm | |
| Modular spacing connections | 7.62 mm | |
| Number of poles | 2 | |
| Connector model | Free connector | |
| Suitable for PCB thickness | 1.5 mm | |
| Type of banding | None | |
| Rated voltage | 630 V | |
| Material of contact surface | Tin | |
| Pollution degree | 2 | |
| Overvoltage category | III | |
| Type of PCB fastening | Connecting contact | |
| Manufacturer | WAGO | |
| Manufacturer Part Number | 231-932/001-000 | |
| Series | MCS MIDI Classic 231 Series | |
| Product type | Angled THT male PCB header | |
| Connector gender | Male | |
| Number of electrical potentials | 2 | |
| Number of connection levels | 1 | |
| Number of contact rows | 1 | |
| PCB connection technology | Through-hole technology (THT) | |
| Termination method | Solder connection | |
| Connector orientation | Angled / right-angle | |
| Mating direction relative to PCB | 0° (parallel to PCB) | |
| Solder pin cross-section | 1.0 × 1.0 mm | |
| Solder pin length | 3.8 mm | |
| PCB drilled hole diameter | 1.4 mm (+0.1 mm) | |
| Solder pin arrangement | Single in-line row | |
| Solder pins per potential | 1 | |
| Contact pitch | 7.62 mm / 0.3 inches | |
| Rated current (IEC) | 12 A | |
| Rated voltage (IEC, III/3) | 500 V | |
| Rated voltage (IEC, III/2) | 630 V | |
| Rated voltage (IEC, II/2) | 1,000 V | |
| Rated impulse voltage (IEC) | 6 kV | |
| Rated voltage (UL 1059, use group B) | 300 V | |
| Rated current (UL 1059, use group B) | 10 A | |
| Rated voltage (UL 1059, use group D) | 300 V | |
| Rated current (UL 1059, use group D) | 10 A | |
| Rated voltage (UL 1977) | 600 V | |
| Rated current (UL 1977) | 10 A | |
| Contact configuration | Shrouded | |
| Mating connector | Compatible WAGO female connector with matching pitch, pole count and mechanical configuration | |
| Variable coding | Yes | |
| Anti-rotation protection | Yes | |
| Integrated locking | No | |
| Contact material | Electrolytic copper | |
| Contact plating | Tin | |
| Housing material | Polyamide PA66 | |
| Flammability classification | UL 94 V-0 | |
| Material temperature limit range | −60 to +100 °C | |
| Width | 15.82 mm | |
| Height | 12.2 mm | |
| Height above PCB surface | 8.4 mm | |
| Depth | 12 mm | |
| Dimensions (W × H × D) | 15.82 × 12.2 × 12 mm | |
| Weight | Approximately 0.876 g | |
| GTIN / EAN | 4044918868389 | |
| Standard packaging unit | 100 pieces | |
| Relevant standards and approvals | IEC/EN 60664-1, UL 1059, UL 1977 and CSA, subject to applicable conditions |
The WAGO 231-932/001-000 is a 2-pole angled THT male PCB header used to create detachable electrical connections between printed circuit boards and compatible female connectors. It is suitable for industrial automation equipment, electronic controllers, machinery and modular electrical assemblies.
The connector features 2 electrical poles with a 7.62 mm contact pitch. Its two male contacts are arranged in a single row, providing two independent electrical connections through one pluggable interface.
The connector features 1.0 × 1.0 mm square solder pins with a 3.8 mm pin length. The specified PCB drilled hole diameter is 1.4 mm with a +0.1 mm tolerance. PCB designers should refer to the manufacturer's dimensional drawing when preparing the final footprint.
The WAGO 231-932/001-000 has an IEC rated current of 12 A. Its IEC voltage ratings are 500 V under category III/3, 630 V under category III/2 and 1,000 V under category II/2 conditions. Under UL 1977, the connector is rated at 600 V and 10 A. Applicable operating ratings depend on the complete mated connection and installation conditions.
The WAGO 231-932/001-000 is a male PCB header and uses through-hole solder pins rather than CAGE CLAMP conductor termination. Compatible female connectors within the WAGO MCS MIDI Classic system may use CAGE CLAMP® spring pressure connections to terminate external wiring.
WAGO MCS MIDI Classic connectors are designed to support dependable and modular electrical interconnections in industrial automation, machinery and electronic equipment. The WAGO 231-932/001-000 combines a compact two-pole configuration, angled through-hole solder connections and a pluggable male interface to provide a practical PCB-to-cable connection solution for industrial electronic assemblies.
We use cookies
We use essential cookies to run this site, your basket and checkout. With your permission we'd also like to use analytics and advertising cookies to understand how the site is used and to measure our adverts.