Standard delivery
£8 ex VAT · free over £200UK parcel delivery is £8 ex VAT, or free on orders over £200 ex VAT.
Heavier items may be charged at a weight-based or pallet rate, shown at checkout.
£0.816
The WAGO 231-864/001-000 is a 4-pole angled THT male PCB header from the WAGO MCS MIDI Classic 231 Series. Designed for reliable printed circuit board interconnections, it features 7.5 mm contact spacing, 1.2 × 1.2 mm square solder pins and a durable grey insulating housing. Its right-angle construction provides a practical connection interface between PCB-mounted equipment and compatible detachable female connectors.
Unlike straight PCB headers, the WAGO 231-864/001-000 features an angled mating interface that allows compatible female connectors to engage parallel to the PCB surface. This arrangement is particularly useful in industrial controllers, compact equipment enclosures and machinery interfaces where horizontal cable routing or restricted vertical clearance must be considered.
With four independent electrical poles, a 16 A IEC rated current and voltage ratings of 500 V, 630 V and 1,000 V under their respective IEC insulation conditions, this header supports modular industrial electrical connections. Its tin-plated electrolytic copper contacts, polyamide PA66 housing and integrated coding features make it suitable for professionally designed PCB assemblies.
The WAGO 231-864/001-000 uses through-hole technology to establish permanent electrical and mechanical connections to a printed circuit board. Its four 1.2 × 1.2 mm square solder pins are inserted through appropriately designed PCB holes and soldered using a suitable manufacturing process.
The connector's solder pin dimensions support a robust PCB termination arrangement. Each pin provides one independent electrical potential, allowing four circuits to be connected through a single pluggable interface. The header has a 16 A IEC rated current, subject to the applicable operating conditions and complete mated connection.
The right-angle construction positions the male mating interface parallel to the PCB surface. This orientation is particularly useful where cable assemblies must approach from the side of the board, where enclosure height is restricted or where the connector needs to remain accessible after installation.
With 7.5 mm spacing between adjacent contacts, the header provides a detachable interface for a suitably matched female connector. The 3.8 mm solder pin length and specified 1.7 mm PCB drilled hole diameter (+0.1 mm) are important considerations when preparing PCB layouts and manufacturing drawings.
The WAGO MCS MIDI Classic system separates permanent PCB solder connections from detachable field-wiring connections. Compatible female connectors may incorporate CAGE CLAMP® spring pressure technology for conductor termination. The 231-864/001-000 itself does not use CAGE CLAMP termination; it connects directly to the PCB through its solder pins.
Integrated coding fingers support configurable mating arrangements. When used with appropriately configured female connectors, coding can help distinguish electrical interfaces and reduce the likelihood of incorrect connections during equipment assembly or maintenance. The header also incorporates anti-rotation protection to support correct mechanical alignment.
The connector uses tin-plated electrolytic copper contacts for electrical conductivity and a grey PA66 housing for mechanical support and electrical insulation. The housing has a UL 94 V-0 flammability classification and a material temperature limit range of −60 to +100 °C. This material limit should not be interpreted as an unrestricted operating temperature rating for the complete electrical assembly.
For safe operation, the WAGO 231-864/001-000 should not be connected or disconnected while energised or under load unless the complete connector system is specifically approved for that operation. Equipment designers should also ensure that accessible male header contacts cannot remain hazardous when the mating connector is removed. PCB footprint dimensions, electrical clearances and mating compatibility should be verified against the manufacturer's technical documentation.
Tick the specs you need, then view products that match.
| Current | 16 A | |
|---|---|---|
| Voltage | 630 V | |
| Product Series | WAGO 231 | |
| Rated surge voltage | 6 kV | |
| Number of plug-in contact rows | 1 | |
| Flammability class of insulation material according to UL 94 | V0 | |
| Operating temperature | -60 – 100 °C | |
| Rated current In | 16 A | |
| Material insulation body | Thermoplastic | |
| Housing colour | Grey | |
| Modular spacing contacts | 7.5 mm | |
| Angle PCB/contact | 0°/180° (horizontal) | |
| Contact type | Pin | |
| Type of electric connection | Soldering connection | |
| Type of fastening | Solder | |
| Type of connection | Flexible PCB-connector | |
| Length pin | 3.8 mm | |
| Modular spacing connections | 7.5 mm | |
| Number of poles | 4 | |
| Connector model | Free connector | |
| Suitable for PCB thickness | 1.5 mm | |
| Type of banding | None | |
| Rated voltage | 630 V | |
| Material of contact surface | Tin | |
| Pollution degree | 2 | |
| Overvoltage category | III | |
| Type of PCB fastening | Connecting contact | |
| Manufacturer | WAGO | |
| Manufacturer Part Number | 231-864/001-000 | |
| Series | MCS MIDI Classic 231 Series | |
| Product type | Angled THT male PCB header | |
| Connector gender | Male | |
| Number of electrical potentials | 4 | |
| Number of connection levels | 1 | |
| Number of contact rows | 1 | |
| PCB connection technology | Through-hole technology (THT) | |
| Termination method | Solder connection | |
| Connector orientation | Angled / right-angle | |
| Solder pin cross-section | 1.2 × 1.2 mm | |
| Solder pin length | 3.8 mm | |
| PCB drilled hole diameter | 1.7 mm (+0.1 mm) | |
| Solder pin arrangement | Single in-line row | |
| Solder pins per potential | 1 | |
| Contact pitch | 7.5 mm | |
| Mating direction relative to PCB | 0° (parallel to PCB) | |
| Rated current (IEC) | 16 A | |
| Rated voltage (IEC, III/3) | 500 V | |
| Rated voltage (IEC, III/2) | 630 V | |
| Rated voltage (IEC, II/2) | 1,000 V | |
| Rated impulse voltage (IEC) | 6 kV | |
| Contact configuration | Shrouded | |
| Mating connector | Compatible WAGO female pluggable connector with matching pitch, pole count and mechanical configuration | |
| Variable coding | Coding fingers provided | |
| Anti-rotation protection | Yes | |
| Contact material | Electrolytic copper | |
| Contact plating | Tin | |
| Housing material | Polyamide PA66 | |
| Flammability classification | UL 94 V-0 | |
| Material temperature limit range | −60 to +100 °C | |
| Width | 30.7 mm | |
| Height | 12.2 mm | |
| Height above PCB surface | 8.4 mm | |
| Depth | 12 mm | |
| Dimensions (W × H × D) | 30.7 × 12.2 × 12 mm | |
| Weight | Approximately 1.9 g | |
| GTIN / EAN | 4044918932097 | |
| Country of origin | Germany | |
| Relevant standards | IEC/EN 60664-1; applicable UL and CSA approvals should be checked for the complete connection system |
The WAGO 231-864/001-000 is a 4-pole angled THT male PCB header designed to create detachable electrical connections between printed circuit boards and compatible female connectors. It is suitable for industrial automation equipment, electronic controllers, machinery and modular electrical assemblies.
The connector features 4 electrical poles with a 7.5 mm contact pitch. Its four male contacts are arranged in a single row, providing four independent electrical connections through one pluggable interface.
The connector features 1.2 × 1.2 mm square solder pins with a 3.8 mm pin length. The specified PCB drilled hole diameter is 1.7 mm with a +0.1 mm tolerance. PCB designers should refer to the manufacturer's dimensional drawing when preparing the final footprint.
The WAGO 231-864/001-000 has an IEC rated current of 16 A. Its IEC voltage ratings are 500 V under category III/3, 630 V under category III/2 and 1,000 V under category II/2 conditions. The applicable operating ratings depend on the installation environment and complete mated connection.
Both products are 4-pole angled THT male PCB headers from the WAGO 231 Series with 7.5 mm contact spacing. The 231-864/001-000 uses larger 1.2 × 1.2 mm solder pins and has a 16 A IEC rated current, while the 231-834/001-000 uses 1.0 × 1.0 mm solder pins and has a 12 A IEC rated current. Their PCB footprints must be checked separately because the solder pin dimensions differ.
WAGO MCS MIDI Classic connectors support modular electrical interconnections in industrial automation, machinery and electronic equipment. The WAGO 231-864/001-000 combines a four-pole configuration, substantial 1.2 × 1.2 mm through-hole solder pins and an angled pluggable male interface to provide a practical PCB-to-cable connection solution for industrial electronic assemblies.
We use cookies
We use essential cookies to run this site, your basket and checkout. With your permission we'd also like to use analytics and advertising cookies to understand how the site is used and to measure our adverts.