Standard delivery
£8 ex VAT · free over £200UK parcel delivery is £8 ex VAT, or free on orders over £200 ex VAT.
Heavier items may be charged at a weight-based or pallet rate, shown at checkout.
£0.544
The WAGO 231-862/001-000 is a professional 2-pole angled male PCB header with 1.2 × 1.2 mm through-hole solder pins, designed to provide dependable detachable electrical connections between printed circuit boards and compatible pluggable female connectors. Part of the WAGO MCS MIDI Classic 231 Series, this connector combines a robust shrouded housing, a 7.5 mm contact pitch and reliable solder termination for industrial automation, control electronics and electrical equipment manufacturing.
Its right-angle configuration allows a compatible female connector to mate parallel to the PCB surface, providing convenient horizontal cable access in compact equipment installations. The header incorporates 1.2 × 1.2 mm square solder pins with a 3.8 mm solder tail length, providing a stable mechanical and electrical interface when correctly installed and soldered into the printed circuit board.
With a 16 A IEC rated current and rated voltages up to 1000 V under specified insulation coordination conditions, the WAGO 231-862/001-000 is suitable for industrial control, signal and power connections within its applicable ratings. Its grey PA66 polyamide housing, tin-plated electrolytic copper contacts, integrated coding fingers and anti-rotation protection support dependable performance and straightforward integration into modular electronic assemblies.
The WAGO 231-862/001-000 provides a dependable through-hole PCB connection interface for industrial electronic equipment. Its two 1.2 × 1.2 mm square solder pins are designed for insertion into appropriately sized PCB holes and permanent solder termination, creating a stable electrical and mechanical connection between the header and the printed circuit board.
Unlike cable-side female connectors that use CAGE CLAMP® spring pressure terminals, the 231-862/001-000 is a male PCB header with solder pins. It forms the board-mounted side of a detachable connector assembly and mates with compatible WAGO MCS MIDI Classic female connectors. The right-angle configuration enables horizontal cable entry, helping designers optimise wiring arrangements where vertical clearance is limited.
The 7.5 mm pitch, shrouded housing and tin-plated contacts support guided connector engagement and reliable electrical conductivity. Its larger solder pin cross-section provides a robust connection interface suitable for the header's 16 A IEC current rating. The connector must be operated within the applicable electrical ratings and should not be mated or unmated while energised or under load.
Tick the specs you need, then view products that match.
| Current | 16 A | |
|---|---|---|
| Voltage | 630 V | |
| Product Series | WAGO 231 | |
| Rated surge voltage | 6 kV | |
| Number of plug-in contact rows | 1 | |
| Flammability class of insulation material according to UL 94 | V0 | |
| Operating temperature | -60 – 100 °C | |
| Rated current In | 16 A | |
| Material insulation body | Thermoplastic | |
| Housing colour | Grey | |
| Modular spacing contacts | 7.5 mm | |
| Angle PCB/contact | 0°/180° (horizontal) | |
| Contact type | Pin | |
| Type of electric connection | Soldering connection | |
| Type of fastening | Solder | |
| Type of connection | Flexible PCB-connector | |
| Length pin | 3.8 mm | |
| Modular spacing connections | 7.5 mm | |
| Number of poles | 2 | |
| Connector model | Free connector | |
| Suitable for PCB thickness | 1.5 mm | |
| Type of banding | None | |
| Rated voltage | 630 V | |
| Material of contact surface | Tin | |
| Pollution degree | 2 | |
| Overvoltage category | III | |
| Type of PCB fastening | Connecting contact | |
| Manufacturer | WAGO | |
| Series | MCS MIDI Classic 231 Series | |
| Manufacturer part number | 231-862/001-000 | |
| Product type | Angled through-hole male PCB header | |
| Connector configuration | Male header / plug | |
| Number of contacts | 2 | |
| Total number of potentials | 2 | |
| Number of levels | 1 | |
| Number of contact rows | 1 | |
| Contact pitch | 7.5 mm | |
| Rated current (IEC) | 16 A | |
| Rated voltage (IEC, III/3) | 500 V | |
| Rated voltage (IEC, III/2) | 630 V | |
| Rated voltage (IEC, II/2) | 1000 V | |
| Rated impulse withstand voltage (IEC) | 6 kV | |
| Rated current (UL) | 10 A | |
| Rated voltage (UL) | 600 V | |
| PCB contact technology | Through-hole technology (THT) | |
| Termination method | Solder connection | |
| PCB mounting type | Through-hole mounting | |
| Header orientation | Angled / right-angle | |
| Mating direction relative to PCB | 0° | |
| Connector gender | Male | |
| Contact arrangement | Single-row, inline | |
| Solder pins per potential | 1 | |
| Solder pin cross-section | 1.2 × 1.2 mm | |
| Solder tail length | 3.8 mm | |
| Drilled hole diameter | 1.7 mm (+0.1 mm) | |
| Connector width | 15.7 mm | |
| Connector height | 12.2 mm | |
| Height above PCB surface | 8.4 mm | |
| Connector depth | 12 mm | |
| Dimensions (W × H × D) | 15.7 × 12.2 × 12 mm | |
| Weight | approx. 1.03 g | |
| Housing material | Polyamide PA66 | |
| Insulation material group | I | |
| Contact material | Electrolytic copper | |
| Contact plating | Tin | |
| Flammability classification | UL94 V-0 | |
| Temperature limit range | −60 to +100 °C | |
| Coding capability | Integrated coding fingers | |
| Anti-rotation protection | Yes | |
| Integral mismating protection | No | |
| Country of origin | Germany | |
| Compliance | RoHS compliant | |
| GTIN / EAN | 4044918932059 | |
| Standard packaging quantity | 200 pieces |
The WAGO 231-862/001-000 is a 2-pole angled male PCB header used to provide detachable electrical connections between printed circuit boards and compatible female connectors in industrial automation, control electronics and machinery.
The header features 2 poles, arranged in a single row with a 7.5 mm contact pitch. Each electrical potential has one through-hole solder pin.
The WAGO 231-862/001-000 has an IEC rated current of 16 A, with rated voltages of 500 V under category III/3, 630 V under category III/2 and 1000 V under category II/2 conditions. Its UL ratings are 10 A and 600 V.
The header uses through-hole technology (THT) with two 1.2 × 1.2 mm square solder pins, each featuring a 3.8 mm solder tail length. The specified drilled hole diameter is 1.7 mm (+0.1 mm), and the pins are soldered into the printed circuit board.
Both are 2-pole angled male PCB headers with a 7.5 mm contact pitch. The 231-862/001-000 uses larger 1.2 × 1.2 mm solder pins and has a 16 A IEC rated current, whereas the 231-832/001-000 uses 1 × 1 mm solder pins and has a 12 A IEC rated current.
WAGO MCS MIDI Classic connectors provide dependable electrical interconnections for industrial automation, PCB manufacturing and machine building. The WAGO 231-862/001-000 combines a compact 2-pole male interface, 7.5 mm contact pitch, robust 1.2 × 1.2 mm angled through-hole solder pins and a flame-retardant grey housing to support reliable industrial electronic assemblies.
We use cookies
We use essential cookies to run this site, your basket and checkout. With your permission we'd also like to use analytics and advertising cookies to understand how the site is used and to measure our adverts.