Standard delivery
£8 ex VAT · free over £200UK parcel delivery is £8 ex VAT, or free on orders over £200 ex VAT.
Heavier items may be charged at a weight-based or pallet rate, shown at checkout.
£2.54
The WAGO 231-843/001-000 is a professional 13-pole angled male PCB header with through-hole solder termination, designed to provide dependable detachable electrical connections between printed circuit boards and compatible pluggable female connectors. Part of the WAGO MCS MIDI Classic 231 Series, this connector features a shrouded contact arrangement, a 7.5 mm contact pitch and a durable grey polyamide housing for industrial automation and electronic equipment.
Its right-angle configuration allows a compatible female connector to mate parallel to the PCB surface, making it particularly suitable for equipment requiring horizontal cable access. The header incorporates 1 × 1 mm square solder pins with a 3.8 mm solder tail length, providing secure electrical and mechanical termination when correctly installed and soldered into the printed circuit board.
With an IEC rated current of 12 A and rated voltages up to 1000 V under specified insulation coordination conditions, the WAGO 231-843/001-000 is suitable for industrial control, signal and power interconnections within its applicable ratings. Its tin-plated electrolytic copper contacts, UL94 V-0 flame-retardant PA66 housing, coding fingers and anti-rotation protection support dependable performance and straightforward integration into modular industrial electronic assemblies.
The WAGO 231-843/001-000 provides a dependable through-hole PCB connection interface for industrial electronic equipment. Its thirteen square solder pins are designed for insertion into appropriately sized PCB holes and permanent solder termination, creating a secure electrical and mechanical connection between the header and the printed circuit board.
Unlike cable-side connectors that use CAGE CLAMP® spring pressure terminals, the 231-843/001-000 is a male PCB header with solder pins. It forms the board-mounted side of a detachable connector assembly and is intended for mating with compatible WAGO MCS MIDI Classic female connectors. Its right-angle arrangement allows cable connections to run horizontally from the board, helping equipment designers optimise cable routing and available enclosure space.
The 7.5 mm contact pitch, four-sided shrouded construction and tin-plated contacts support guided connector engagement and dependable electrical conductivity. Its flame-retardant housing and wide temperature limit range make it suitable for industrial electronics and automation applications. The connector must be operated within the applicable ratings and must not be mated or unmated while energised or under load.
Tick the specs you need, then view products that match.
| Current | 12 A | |
|---|---|---|
| Voltage | 630 V | |
| Product Series | WAGO 231 | |
| Rated surge voltage | 6 kV | |
| Number of plug-in contact rows | 1 | |
| Flammability class of insulation material according to UL 94 | V0 | |
| Operating temperature | -60 – 100 °C | |
| Rated current In | 12 A | |
| Material insulation body | Thermoplastic | |
| Housing colour | Grey | |
| Modular spacing contacts | 7.5 mm | |
| Angle PCB/contact | 0°/180° (horizontal) | |
| Contact type | Pin | |
| Type of electric connection | Soldering connection | |
| Type of fastening | Solder | |
| Type of connection | Flexible PCB-connector | |
| Length pin | 3.8 mm | |
| Modular spacing connections | 7.5 mm | |
| Number of poles | 13 | |
| Connector model | Free connector | |
| Suitable for PCB thickness | 1.5 mm | |
| Type of banding | None | |
| Rated voltage | 630 V | |
| Material of contact surface | Tin | |
| Pollution degree | 2 | |
| Overvoltage category | III | |
| Type of PCB fastening | Connecting contact | |
| Manufacturer | WAGO | |
| Series | MCS MIDI Classic 231 Series | |
| Manufacturer part number | 231-843/001-000 | |
| Product type | Angled male PCB header | |
| Connector configuration | Male header / plug | |
| Number of contacts | 13 | |
| Total number of potentials | 13 | |
| Number of levels | 1 | |
| Number of contact rows | 1 | |
| Contact pitch | 7.5 mm | |
| Rated current (IEC) | 12 A | |
| Rated voltage (IEC, III/3) | 500 V | |
| Rated voltage (IEC, III/2) | 630 V | |
| Rated voltage (IEC, II/2) | 1000 V | |
| Rated impulse withstand voltage (IEC) | 6 kV | |
| Rated current (UL) | 10 A | |
| Rated voltage (UL) | 600 V | |
| PCB contact technology | Through-hole technology (THT) | |
| Termination method | Solder connection | |
| PCB mounting type | Through-hole mounting | |
| Header orientation | Angled / right-angle | |
| Mating direction relative to PCB | 0° | |
| Connector gender | Male | |
| Contact arrangement | Single-row, inline | |
| Solder pins per potential | 1 | |
| Solder pin cross-section | 1 × 1 mm | |
| Solder tail length | 3.8 mm | |
| PCB drilled hole diameter | 1.4 mm (+0.1 mm) | |
| Connector width | 98.2 mm | |
| Connector height | 12.2 mm | |
| Height above PCB surface | 8.4 mm | |
| Connector depth | 12 mm | |
| Dimensions (W × H × D) | 98.2 × 12.2 × 12 mm | |
| Weight | approx. 5.234 g | |
| Housing material | Polyamide PA66 | |
| Insulation material group | I | |
| Contact material | Electrolytic copper | |
| Contact plating | Tin | |
| Flammability classification | UL94 V-0 | |
| Temperature limit range | −60 to +100 °C | |
| Coding capability | Integrated coding fingers | |
| Anti-rotation protection | Yes | |
| Integral mismating protection | No | |
| Country of origin | Germany | |
| Compliance | RoHS compliant | |
| GTIN / EAN | 4044918868341 | |
| Standard packaging quantity | 50 pieces |
The WAGO 231-843/001-000 is a 13-pole angled male PCB header used to provide detachable electrical connections between printed circuit boards and compatible female connectors in industrial automation, control electronics and machinery.
The header features 13 poles, arranged in a single row with a 7.5 mm contact pitch. Each electrical potential has one through-hole solder pin.
The WAGO 231-843/001-000 has an IEC rated current of 12 A, with rated voltages of 500 V under category III/3, 630 V under category III/2 and 1000 V under category II/2 conditions. Its UL ratings are 10 A and 600 V.
The header uses through-hole technology (THT) with thirteen 1 × 1 mm square solder pins, each featuring a 3.8 mm solder tail length. The specified drilled hole diameter is 1.4 mm (+0.1 mm), and the pins are soldered into the printed circuit board.
The right-angle configuration allows a compatible female connector to mate horizontally, parallel to the PCB surface. This can improve cable routing and reduce the vertical clearance required in industrial electronic assemblies.
WAGO MCS MIDI Classic connectors provide dependable electrical interconnections for industrial automation, PCB manufacturing and machine building. The WAGO 231-843/001-000 combines a 13-pole male interface, 7.5 mm contact pitch, robust angled through-hole solder pins and a flame-retardant grey housing to support reliable, modular industrial electronic assemblies.
We use cookies
We use essential cookies to run this site, your basket and checkout. With your permission we'd also like to use analytics and advertising cookies to understand how the site is used and to measure our adverts.