Standard delivery
£8 ex VAT · free over £200UK parcel delivery is £8 ex VAT, or free on orders over £200 ex VAT.
Heavier items may be charged at a weight-based or pallet rate, shown at checkout.
£2.35
The WAGO 231-842/001-000 is a high-quality 12-pole angled male PCB header from the WAGO MCS MIDI Classic 231 series, designed to provide reliable pluggable electrical connections between printed circuit boards and compatible female connectors. Featuring through-hole technology (THT), a 7.5 mm contact pitch and a grey insulating housing, this connector is well suited to industrial automation, machinery control systems and electronic equipment.
Designed for horizontal connector mating relative to the PCB, the 231-842/001-000 incorporates 1.0 × 1.0 mm square solder pins with a projection length of 3.8 mm. Its twelve individual electrical contacts provide a practical interface for multiple control or power circuits, while the angled construction supports efficient cable routing and compact equipment layouts.
With a rated current of 12 A under IEC conditions and voltage ratings of up to 1000 V under specified IEC insulation coordination conditions, this male header provides dependable performance in industrial PCB applications. Tin-plated electrolytic copper contacts, a flame-retardant polyamide housing and integrated coding fingers support reliable electrical connectivity and straightforward equipment assembly.
The WAGO MCS MIDI Classic series provides a modular solution for detachable electrical connections in industrial electronic equipment. Its PCB headers and compatible female connectors enable manufacturers to connect wiring assemblies to printed circuit boards without permanently soldering external cables to the equipment.
The 231-842/001-000 uses a right-angle through-hole design, allowing a compatible connector to mate parallel to the PCB surface. This configuration is particularly useful where enclosure space, component positioning or cable routing makes horizontal connector access preferable to a vertical connection.
Its twelve contacts at 7.5 mm spacing provide independent electrical connections for suitable power and control circuits. The square solder pins establish a permanent electrical and mechanical interface with the PCB, while the detachable mating connector supports modular installation, equipment replacement and maintenance.
The grey polyamide housing provides insulation and mechanical support for the tin-plated contacts. Integrated coding fingers assist with connector identification, although the complete mating assembly must be checked for compatible geometry, pole count, pitch and coding configuration.
The MCS MIDI Classic system is not designed for load-breaking operation. Connectors must not be mated or unmated while energised or under load, and equipment must be safely isolated before disconnection.
Tick the specs you need, then view products that match.
| Current | 12 A | |
|---|---|---|
| Voltage | 630 V | |
| Product Series | WAGO 231 | |
| Rated surge voltage | 6 kV | |
| Number of plug-in contact rows | 1 | |
| Flammability class of insulation material according to UL 94 | V0 | |
| Operating temperature | -60 – 100 °C | |
| Rated current In | 12 A | |
| Material insulation body | Thermoplastic | |
| Housing colour | Grey | |
| Modular spacing contacts | 7.5 mm | |
| Angle PCB/contact | 0°/180° (horizontal) | |
| Contact type | Pin | |
| Type of electric connection | Soldering connection | |
| Type of fastening | Solder | |
| Type of connection | Flexible PCB-connector | |
| Length pin | 3.8 mm | |
| Modular spacing connections | 7.5 mm | |
| Number of poles | 12 | |
| Connector model | Free connector | |
| Suitable for PCB thickness | 1.5 mm | |
| Type of banding | None | |
| Rated voltage | 630 V | |
| Material of contact surface | Tin | |
| Pollution degree | 2 | |
| Overvoltage category | III | |
| Type of PCB fastening | Connecting contact | |
| Manufacturer | WAGO | |
| Manufacturer Part Number | 231-842/001-000 | |
| Series | MCS MIDI Classic 231 | |
| Product Type | Angled male PCB header | |
| Connector Gender | Male | |
| Number of Electrical Potentials | 12 | |
| Number of Rows | 1 | |
| Contact Pitch | 7.5 mm | |
| Rated Current (IEC) | 12 A | |
| Rated Voltage (IEC, III/3) | 500 V | |
| Rated Voltage (IEC, III/2) | 630 V | |
| Rated Voltage (IEC, II/2) | 1000 V | |
| Rated Impulse Withstand Voltage | 6 kV | |
| PCB Contact Technology | Through-hole technology (THT) | |
| Termination Method | Solder connection | |
| Mounting Type | Through-hole PCB mounting | |
| Header Orientation | Angled / right-angle | |
| Mating Direction Relative to PCB | 0° (parallel) | |
| Solder Pin Dimensions | 1.0 × 1.0 mm | |
| Solder Pin Length | 3.8 mm | |
| Recommended Drilled Hole Diameter | 1.4 mm (+0.1 mm) | |
| Number of Solder Pins per Potential | 1 | |
| Width | 90.7 mm | |
| Height | 12.2 mm | |
| Height Above PCB Surface | 8.4 mm | |
| Depth | 12 mm | |
| Weight | Approximately 4.8 g | |
| Contact Material | Electrolytic copper | |
| Contact Plating | Tin | |
| Housing Material | Polyamide 66 (PA66) | |
| Flammability Classification | UL 94 V-0 | |
| Temperature Limit Range | −60 to +100 °C | |
| Insulating Material Group | I | |
| Number of Levels | 1 | |
| Dedicated Mismating Protection | No | |
| Country of Origin | Germany | |
| GTIN | 4044918868310 |
The WAGO 231-842/001-000 is a 12-pole angled male PCB header designed to create detachable electrical connections between printed circuit boards and compatible female connectors in industrial automation, machinery and electronic control equipment.
The connector has an IEC rated current of 12 A. The permissible current in a complete assembly also depends on the mating connector, PCB conductor design and operating conditions.
The header features a 7.5 mm contact pitch, with twelve contacts arranged in a single row.
It is an angled, right-angle male PCB header. The mating connector engages parallel to the PCB surface, making it suitable for horizontal cable connections.
The header uses through-hole technology (THT). Its 1.0 × 1.0 mm square solder pins are inserted into corresponding PCB holes and soldered to create a permanent connection. The solder pins have a length of 3.8 mm.
The connector has IEC ratings of 500 V under category III/3, 630 V under category III/2 and 1000 V under category II/2. The applicable voltage rating depends on the installation's overvoltage category, pollution degree and insulation coordination requirements.
The 231-842/001-000 is a grey THT header with 3.8 mm solder pins, whereas the 231-842/001-000/105-604 is a black through-hole reflow (THR) version with 2.4 mm solder pins. They are intended for different PCB assembly processes and should not be treated as identical components.
No. This male PCB header uses solder termination and does not directly accept external conductors. Compatible female connectors may use WAGO CAGE CLAMP® spring-pressure technology for terminating field wiring.
The header has a specified temperature limit range of −60 to +100 °C. The operating limits of the complete PCB assembly and mating connector must also be considered.
No. The WAGO MCS MIDI Classic connector system is not designed for load-breaking operation. Mating and unmating should only take place after the electrical circuit has been safely isolated.
WAGO MCS MIDI Classic connectors are designed for dependable electrical connectivity in industrial automation, machinery and electronic equipment. The 231-842/001-000 combines a 12-pole angled PCB header design, 7.5 mm contact pitch, robust through-hole solder termination and tin-plated copper contacts to support reliable PCB connections, efficient equipment assembly and straightforward maintenance.
We use cookies
We use essential cookies to run this site, your basket and checkout. With your permission we'd also like to use analytics and advertising cookies to understand how the site is used and to measure our adverts.