Standard delivery
£8 ex VAT · free over £200UK parcel delivery is £8 ex VAT, or free on orders over £200 ex VAT.
Heavier items may be charged at a weight-based or pallet rate, shown at checkout.
£1.90
The WAGO 231-840/001-000 is a robust 10-pole angled male PCB header from the WAGO MCS MIDI Classic 231 series, designed to provide dependable detachable electrical connections between printed circuit boards and compatible pluggable connectors. Featuring through-hole technology (THT), a 7.5 mm contact pitch and a grey insulating housing, this component is suited to industrial automation, electronic control equipment and machinery applications.
Designed for horizontal connector mating relative to the PCB, the 231-840/001-000 incorporates 1.0 × 1.0 mm square solder pins for permanent through-hole solder termination. Its ten individual electrical contacts allow multiple circuits to be connected through one compact interface, simplifying equipment assembly, servicing and modular wiring.
With an IEC rated current of 12 A and rated voltages of up to 1000 V under specified IEC conditions, the header provides a practical connection solution for industrial PCB assemblies. Tin-plated electrolytic copper contacts, a flame-retardant polyamide housing and integrated coding features contribute to reliable electrical performance and convenient connector integration.
The WAGO MCS MIDI Classic series provides a modular approach to connecting industrial electronic equipment. Its PCB headers and compatible cable connectors create detachable electrical interfaces, allowing equipment manufacturers to simplify wiring, installation and servicing without repeatedly soldering individual conductors.
The 231-840/001-000 uses an angled through-hole design that allows a compatible connector to mate parallel to the PCB surface. This arrangement is particularly useful where equipment layout, enclosure dimensions or cable routing make a horizontal connection preferable to a vertical header.
Ten tin-plated male contacts are arranged at a 7.5 mm pitch, providing independent electrical connections for suitable control or power circuits. The solder pins permanently secure the header to the printed circuit board, while the mating connector can be detached when the equipment has been safely isolated.
For connector selection, the mating component must have the correct pole count, contact pitch, mechanical geometry and coding arrangement. The MCS MIDI Classic system is not intended for load-breaking operations, so connectors should not be mated or unmated while energised or under load.
Tick the specs you need, then view products that match.
| Current | 12 A | |
|---|---|---|
| Voltage | 630 V | |
| Product Series | WAGO 231 | |
| Rated surge voltage | 6 kV | |
| Number of plug-in contact rows | 1 | |
| Flammability class of insulation material according to UL 94 | V0 | |
| Operating temperature | -60 – 100 °C | |
| Rated current In | 12 A | |
| Material insulation body | Thermoplastic | |
| Housing colour | Grey | |
| Modular spacing contacts | 7.5 mm | |
| Angle PCB/contact | 0°/180° (horizontal) | |
| Contact type | Pin | |
| Type of electric connection | Soldering connection | |
| Type of fastening | Solder | |
| Type of connection | Flexible PCB-connector | |
| Length pin | 3.8 mm | |
| Modular spacing connections | 7.5 mm | |
| Number of poles | 10 | |
| Connector model | Free connector | |
| Suitable for PCB thickness | 1.5 mm | |
| Type of banding | None | |
| Rated voltage | 630 V | |
| Material of contact surface | Tin | |
| Pollution degree | 2 | |
| Overvoltage category | III | |
| Type of PCB fastening | Connecting contact | |
| Manufacturer | WAGO | |
| Manufacturer Part Number | 231-840/001-000 | |
| Series | MCS MIDI Classic 231 | |
| Product Type | Angled male PCB header | |
| Connector Gender | Male | |
| Number of Electrical Potentials | 10 | |
| Number of Rows | 1 | |
| Contact Pitch | 7.5 mm | |
| Rated Current (IEC) | 12 A | |
| Rated Current (UL) | 10 A | |
| Rated Voltage (IEC, III/3) | 500 V | |
| Rated Voltage (IEC, III/2) | 630 V | |
| Rated Voltage (IEC, II/2) | 1000 V | |
| Rated Impulse Withstand Voltage | 6 kV | |
| PCB Contact Technology | Through-hole technology (THT) | |
| Termination Method | Solder connection | |
| Mounting Type | Through-hole PCB mounting | |
| Header Orientation | Angled / right-angle | |
| Mating Direction Relative to PCB | 0° (parallel) | |
| Solder Pin Dimensions | 1.0 × 1.0 mm | |
| Solder Pin Length | 3.8 mm | |
| Recommended Drilled Hole Diameter | 1.4 mm (+0.1 mm) | |
| Number of Solder Pins per Potential | 1 | |
| Width | 75.7 mm | |
| Height | 12.2 mm | |
| Height Above PCB Surface | 8.4 mm | |
| Depth | 12 mm | |
| Weight | Approximately 3.9 g | |
| Contact Material | Electrolytic copper | |
| Contact Plating | Tin | |
| Housing Material | Polyamide 66 (PA66) | |
| Flammability Classification | UL 94 V-0 | |
| Temperature Limit Range | −60 to +100 °C | |
| Insulating Material Group | I | |
| Mismating Protection | No dedicated mismating protection | |
| GTIN | 4044918868242 |
The WAGO 231-840/001-000 is a 10-pole angled male PCB header used to create detachable electrical connections between printed circuit boards and compatible female connectors in industrial automation, machinery and electronic control equipment.
The header has an IEC rated current of 12 A. Its applicable current rating must be considered alongside the mating connector, PCB conductor design and operating conditions.
The connector has a 7.5 mm contact pitch, with ten contacts arranged in a single row.
It is an angled, right-angle male PCB header. The mating connector engages parallel to the PCB surface, making the design suitable for horizontal cable connections.
The header uses through-hole technology (THT). Its 1.0 × 1.0 mm square solder pins are inserted into corresponding PCB holes and soldered to form a permanent connection.
The connector has IEC ratings of 500 V under category III/3, 630 V under category III/2 and 1000 V under category II/2. The applicable rating depends on the installation's insulation coordination requirements.
The 231-840/001-000 is the grey THT version with 3.8 mm solder pins, whereas the 231-840/001-000/105-604 is a black through-hole reflow (THR) variant with 2.4 mm solder pins. They are intended for different PCB assembly processes and should not be treated as identical parts.
No. This male PCB header uses solder termination and does not directly accept field wiring. Compatible female connectors may use WAGO CAGE CLAMP® spring-pressure technology for terminating conductors.
No. The MCS MIDI Classic connector system is not designed for load-breaking operation. Mating and unmating should only take place after the electrical circuit has been safely isolated.
WAGO MCS MIDI Classic connectors provide dependable electrical interfaces for industrial automation, machinery and electronic equipment. The 231-840/001-000 combines a 10-pole angled PCB header design, 7.5 mm contact pitch, robust through-hole solder termination and tin-plated copper contacts to support efficient equipment assembly, secure electrical connections and straightforward maintenance.
We use cookies
We use essential cookies to run this site, your basket and checkout. With your permission we'd also like to use analytics and advertising cookies to understand how the site is used and to measure our adverts.