Standard delivery
£8 ex VAT · free over £200UK parcel delivery is £8 ex VAT, or free on orders over £200 ex VAT.
Heavier items may be charged at a weight-based or pallet rate, shown at checkout.
£1.53
The WAGO 231-838/001-000 is a robust and reliable 8-pole angled through-hole technology (THT) male header designed for secure electrical connections between printed circuit boards (PCBs) and compatible pluggable connectors. As part of the WAGO MCS MIDI Classic series, this connector provides a dependable interface for industrial electronics, automation equipment and electrical control systems.
Featuring a 7.5 mm pin spacing and 1.0 × 1.0 mm square solder pins, the WAGO 231-838/001-000 enables reliable through-hole solder mounting on printed circuit boards. Its angled design allows the mating connector to be inserted parallel to the PCB surface, making it particularly suitable for electronic assemblies requiring horizontal connector access.
With 8 electrical connection positions, a 12 A rated current and a durable grey insulating housing, this male header is suitable for industrial PCB interconnections where mechanical stability, dependable electrical continuity and convenient plug-in connectivity are essential. Its compact construction supports efficient integration into control modules, power electronics and OEM equipment.
The WAGO MCS MIDI Classic connector system is designed to provide secure and convenient electrical connections between printed circuit boards and external wiring assemblies. The WAGO 231-838/001-000 uses a solder-mounted male header arrangement that establishes a permanent connection to the PCB while allowing compatible female connectors to be plugged in and removed when required.
Its angled connector configuration is especially useful in compact industrial electronics where horizontal access is preferred. The 7.5 mm pitch, tin-plated copper contacts and through-hole solder mounting support dependable electrical connectivity and mechanical stability in control equipment, industrial power supplies and automation modules.
The connector's insulating housing and UL94 V-0 flammability classification make it suitable for integration into appropriately designed industrial electronic assemblies. Electrical loading, insulation coordination and operating conditions should be assessed against the complete connector assembly and applicable installation requirements.
Tick the specs you need, then view products that match.
| Current | 12 A | |
|---|---|---|
| Voltage | 630 V | |
| Product Series | WAGO 231 | |
| Rated surge voltage | 6 kV | |
| Number of plug-in contact rows | 1 | |
| Flammability class of insulation material according to UL 94 | V0 | |
| Operating temperature | -60 – 100 °C | |
| Rated current In | 12 A | |
| Material insulation body | Thermoplastic | |
| Housing colour | Grey | |
| Modular spacing contacts | 7.5 mm | |
| Angle PCB/contact | 0°/180° (horizontal) | |
| Contact type | Pin | |
| Type of electric connection | Soldering connection | |
| Type of fastening | Solder | |
| Type of connection | Flexible PCB-connector | |
| Length pin | 3.8 mm | |
| Modular spacing connections | 7.5 mm | |
| Number of poles | 8 | |
| Connector model | Free connector | |
| Suitable for PCB thickness | 1.5 mm | |
| Type of banding | None | |
| Rated voltage | 630 V | |
| Material of contact surface | Tin | |
| Pollution degree | 2 | |
| Overvoltage category | III | |
| Type of PCB fastening | Connecting contact | |
| Manufacturer | WAGO | |
| Series | MCS MIDI Classic / 231 Series | |
| Model | 231-838/001-000 | |
| Product type | THT male header / PCB connector | |
| Connector gender | Male | |
| Total number of potentials | 8 | |
| Number of levels | 1 | |
| Pin spacing | 7.5 mm | |
| Rated current | 12 A | |
| Rated voltage (II / 2) | 1000 V | |
| Rated voltage (III / 2) | 630 V | |
| Rated voltage (III / 3) | 500 V | |
| Rated impulse voltage | 6 kV | |
| Solder pin dimensions | 1.0 × 1.0 mm | |
| Solder pin length | 3.8 mm | |
| PCB drilled hole diameter | 1.4 mm (+0.1 mm) | |
| Connector orientation | Angled / 90° | |
| Mounting technology | Through-hole technology (THT) | |
| Mounting location | Printed circuit board (PCB) | |
| Number of solder pins per potential | 1 | |
| Contact material | Electrolytic copper | |
| Contact plating | Tin-plated | |
| Insulating material | Polyamide 66 (PA 66) | |
| Flammability classification | UL94 V-0 | |
| Temperature limit range | −60 to +100 °C | |
| Width | 60.7 mm | |
| Height | 12.2 mm | |
| Depth | 12 mm | |
| Height above PCB surface | 8.4 mm | |
| Weight | Approx. 3.24 g | |
| Connector interface | Pluggable male header | |
| Product group | Multi Connection System (MCS) |
The WAGO 231-838/001-000 is an 8-pole angled THT male header used to provide a pluggable electrical interface between printed circuit boards and compatible mating connectors in industrial electronic and automation equipment.
The connector has 8 poles, providing eight individual electrical connection positions in a single-level arrangement.
The WAGO 231-838/001-000 features a 7.5 mm pin spacing and uses 1.0 × 1.0 mm square solder pins for through-hole PCB mounting.
The connector has a 12 A rated current. The permissible operating current must also take account of the mating connector, PCB design and applicable installation conditions.
It is an angled, 90° male header designed for horizontal mating access when installed on a printed circuit board.
The connector uses through-hole technology (THT). Its square solder pins are inserted into the corresponding PCB holes and soldered to establish a secure mechanical and electrical connection.
The WAGO 231-838/001-000 has a specified temperature limit range of −60 to +100 °C, subject to the electrical and environmental requirements of the complete assembly.
The header belongs to the WAGO MCS MIDI Classic series and is designed for use with compatible 8-pole female connectors featuring the corresponding 7.5 mm pitch and mating geometry.
WAGO MCS MIDI Classic pluggable connectors provide reliable PCB interconnection solutions for industrial electronics, automation equipment and machine building, combining robust solder-mounted interfaces with the flexibility of detachable electrical connections.
We use cookies
We use essential cookies to run this site, your basket and checkout. With your permission we'd also like to use analytics and advertising cookies to understand how the site is used and to measure our adverts.