Standard delivery
£8 ex VAT · free over £200UK parcel delivery is £8 ex VAT, or free on orders over £200 ex VAT.
Heavier items may be charged at a weight-based or pallet rate, shown at checkout.
£1.97
The WAGO 231-770/001-000 is a robust and reliable 10-pole through-hole technology (THT) male PCB header with straight solder pins, designed for secure pluggable electrical connections in industrial automation, electronic control systems and printed circuit board assemblies. As part of the established WAGO MCS MIDI Classic 231 series, this connector provides a dependable interface between printed circuit boards and compatible detachable female wiring connectors.
Featuring a 7.62 mm contact pitch and 1.2 × 1.2 mm square solder pins, the 231-770/001-000 is designed for permanent through-hole solder mounting on printed circuit boards. Its ten independent electrical contacts support multiple power or control connections within one compact assembly, while the straight pin arrangement enables vertical PCB installation and convenient connector mating.
With a rated current of 16 A under IEC conditions and a rated voltage of 630 V under IEC overvoltage category III, pollution degree 2 conditions, this male header is suitable for demanding industrial electrical applications. Its orange polyamide housing, tin-plated electrolytic copper contacts, integrated coding fingers and anti-rotation protection help provide dependable electrical performance, mechanical stability and efficient equipment assembly.
The WAGO MCS MIDI Classic series provides a versatile modular connection system for industrial electronics, machinery and electrical automation equipment. Its male PCB headers and compatible female connectors allow electrical wiring to be connected and disconnected from printed circuit boards without repeatedly soldering or removing individual conductors.
The 231-770/001-000 uses through-hole solder technology, with ten straight square pins designed to pass through corresponding holes in a printed circuit board before soldering. This provides a permanent electrical and mechanical connection between the header and PCB while allowing the mating female connector to remain detachable for equipment installation, servicing and replacement.
The header's 7.62 mm contact spacing provides separation between adjacent electrical potentials, while its tin-plated electrolytic copper contacts support dependable electrical conductivity. The orange polyamide housing provides insulation and mechanical support, and the integrated coding fingers and anti-rotation features help support reliable connector positioning and mating.
The 231-770/001-000 is designed to work with compatible 10-pole WAGO MCS MIDI Classic female connectors of the corresponding pitch and mating configuration. These female connectors may incorporate WAGO CAGE CLAMP® spring-pressure conductor termination, allowing external wiring to be installed without conventional screw-terminal tightening. The male PCB header itself uses solder connections rather than spring-pressure terminals.
The WAGO MCS MIDI Classic connector system is not designed for load-breaking operation. Connectors must not be mated or unmated while live or under load, and the equipment design must prevent accessible mating contacts from remaining energised when disconnected.
Tick the specs you need, then view products that match.
| Current | 16 A | |
|---|---|---|
| Voltage | 630 V | |
| Product Series | WAGO 231 | |
| Rated surge voltage | 6 kV | |
| Number of plug-in contact rows | 1 | |
| Flammability class of insulation material according to UL 94 | V0 | |
| Operating temperature | -60 – 100 °C | |
| Rated current In | 16 A | |
| Material insulation body | Thermoplastic | |
| Housing colour | Orange | |
| Modular spacing contacts | 7.62 mm | |
| Angle PCB/contact | 90° (upwards vertical) | |
| Contact type | Pin | |
| Type of electric connection | Soldering connection | |
| Type of fastening | Solder | |
| Type of connection | Flexible PCB-connector | |
| Length pin | 5 mm | |
| Modular spacing connections | 7.62 mm | |
| Number of poles | 10 | |
| Connector model | Free connector | |
| Suitable for PCB thickness | 1.5 mm | |
| Type of banding | None | |
| Rated voltage | 630 V | |
| Material of contact surface | Tin | |
| Pollution degree | 2 | |
| Overvoltage category | III | |
| Type of PCB fastening | Connecting contact | |
| Manufacturer | WAGO | |
| Series | MCS MIDI Classic 231 | |
| Model | 231-770/001-000 | |
| Product type | THT male PCB header | |
| Connector configuration | 10-pole, 10-way | |
| Number of contacts | 10 | |
| Number of electrical potentials | 10 | |
| Number of contact rows | 1 | |
| Connector system | WAGO Multi Connection System (MCS) | |
| Contact pitch | 7.62 mm | |
| Rated current (IEC) | 16 A | |
| Rated current (UL) | 15 A | |
| Rated voltage (IEC, III/3) | 500 V | |
| Rated voltage (IEC, III/2) | 630 V | |
| Rated voltage (IEC, II/2) | 1000 V | |
| Rated voltage (UL) | 600 V | |
| Rated impulse withstand voltage | 6 kV | |
| PCB contact technology | Through-hole technology (THT) | |
| Termination type | Solder connection | |
| Mounting type | Through-hole PCB mounting | |
| Header orientation | Straight / vertical | |
| Mating direction relative to PCB | 90° | |
| Solder pin dimensions | 1.2 × 1.2 mm | |
| Solder pin length | 5 mm | |
| Recommended drilled hole diameter | 1.7 mm (+0.1 mm) | |
| Number of solder pins per potential | 1 | |
| Width | 76.78 mm | |
| Height | 17 mm | |
| Height above PCB surface | 12 mm | |
| Depth | 8.4 mm | |
| Weight | approx. 4.7 g | |
| Contact material | Electrolytic copper | |
| Contact plating | Tin | |
| Insulating material | Polyamide 66 (PA66) | |
| Flammability rating | UL 94 V-0 | |
| Temperature limit range | −60 to +100 °C | |
| Insulating material group | I | |
| Standards and approvals | IEC/EN 60664-1, UL 1059, UL 1977 and CSA | |
| Compliance | RoHS | |
| Country of origin | Germany | |
| GTIN | 4044918931960 |
The WAGO 231-770/001-000 is a 10-pole male PCB header designed to provide a detachable electrical interface between printed circuit boards and compatible female connectors in industrial automation, machinery and electronic control equipment.
The connector has a rated current of 16 A under IEC conditions and 15 A under UL conditions, subject to the applicable installation requirements, PCB design and operating conditions.
The header features a 7.62 mm contact pitch, making it suitable for compatible WAGO MCS MIDI Classic female connectors with the same pitch and ten-pole configuration.
The connector uses through-hole technology (THT) and is mounted by inserting its straight solder pins into corresponding PCB holes and soldering them in place. Each square solder pin measures 1.2 × 1.2 mm and has a length of 5 mm.
The 231-770/001-000 is a male PCB header with ten straight pins. It is designed to mate with compatible female pluggable connectors from the WAGO MCS MIDI Classic system.
No. The 231-770/001-000 is a solder-mounted male PCB header and does not directly accept conductors through CAGE CLAMP® terminals. Compatible female connectors in the MCS MIDI Classic system may use CAGE CLAMP® spring-pressure termination for external wiring.
The header is rated at 500 V under IEC category III/3, 630 V under IEC category III/2 and 1000 V under IEC category II/2. The permissible operating voltage depends on the applicable overvoltage category, pollution degree and installation requirements.
The WAGO 231-770/001-000 has a specified temperature limit range of −60 to +100 °C. The operating limits of the complete PCB assembly and mating connector must also be considered.
The header is designed for use with compatible 10-pole, 7.62 mm pitch female connectors from the WAGO MCS MIDI Classic system. The connector geometry, coding and any locking arrangements must be compatible with the selected mating connector.
No. The WAGO MCS MIDI Classic connector system does not provide load-breaking capacity. Mating connectors must not be connected or disconnected while live or under load, and accessible contacts must not remain energised when disconnected.
WAGO MCS MIDI Classic PCB connectors are designed for dependable electrical connectivity in industrial electronics, automation systems and machine building. The 231-770/001-000 combines a robust 10-pole through-hole design, 7.62 mm contact pitch, tin-plated copper contacts and secure solder termination to support reliable PCB connections, efficient equipment assembly and straightforward maintenance.
We use cookies
We use essential cookies to run this site, your basket and checkout. With your permission we'd also like to use analytics and advertising cookies to understand how the site is used and to measure our adverts.