Standard delivery
£8 ex VAT · free over £200UK parcel delivery is £8 ex VAT, or free on orders over £200 ex VAT.
Heavier items may be charged at a weight-based or pallet rate, shown at checkout.
£1.90
The WAGO 231-740/001-000 is a 10-pole straight through-hole technology (THT) male PCB header from the WAGO MCS MIDI Classic 231 Series. Designed for industrial wire-to-board connections, this connector features a 7.62 mm contact pitch, straight 1.0 × 1.0 mm square solder pins and a shrouded male mating interface for compatible female connectors.
With an IEC rated current of 12 A and voltage ratings of up to 1000 V under the specified IEC installation conditions, the WAGO 231-740/001-000 provides a dependable connection between printed circuit boards and detachable industrial wiring. Its ten contacts are arranged in a single row, allowing multiple circuits to be connected through one organised interface.
The header incorporates 5 mm solder tails for vertical through-hole PCB mounting, tin-plated electrolytic copper contacts and an orange PA66 insulating housing. Its shrouded construction supports guided mating with compatible MCS MIDI Classic female connectors, making it suitable for industrial control electronics, automation equipment, modular machinery and OEM electrical assemblies.
The WAGO 231-740/001-000 uses straight through-hole solder pins to establish a permanent electrical and mechanical connection to a printed circuit board. Its 1.0 × 1.0 mm square contacts and 5 mm solder tail length provide a defined termination arrangement for appropriately designed PCB footprints and controlled soldering processes.
Unlike female cable connectors within the MCS MIDI Classic system, this male header does not use CAGE CLAMP® conductor termination. Instead, its soldered contacts form the fixed PCB-side connection, while compatible female connectors provide the detachable cable interface. This arrangement supports modular equipment manufacture, commissioning, maintenance and replacement.
The four-sided shrouded housing helps guide suitable mating connectors and protects the contact arrangement during normal handling. Tin-plated electrolytic copper contacts provide an electrically conductive interface, while the flame-retardant PA66 housing supports electrical insulation. Correct PCB footprint design, soldering procedures and mating component selection are essential. The connector is not intended for load-breaking operation and must not be connected or disconnected while live or under load.
Tick the specs you need, then view products that match.
| Current | 12 A | |
|---|---|---|
| Voltage | 630 V | |
| Product Series | WAGO 231 | |
| Rated surge voltage | 6 kV | |
| Number of plug-in contact rows | 1 | |
| Flammability class of insulation material according to UL 94 | V0 | |
| Operating temperature | -60 – 100 °C | |
| Rated current In | 12 A | |
| Material insulation body | Thermoplastic | |
| Housing colour | Orange | |
| Modular spacing contacts | 7.62 mm | |
| Angle PCB/contact | 90° (upwards vertical) | |
| Contact type | Pin | |
| Type of electric connection | Soldering connection | |
| Type of fastening | Solder | |
| Type of connection | Flexible PCB-connector | |
| Length pin | 5 mm | |
| Modular spacing connections | 7.62 mm | |
| Number of poles | 10 | |
| Connector model | Free connector | |
| Suitable for PCB thickness | 1.5 mm | |
| Type of banding | None | |
| Rated voltage | 630 V | |
| Material of contact surface | Tin | |
| Pollution degree | 2 | |
| Overvoltage category | III | |
| Type of PCB fastening | Connecting contact | |
| Manufacturer | WAGO | |
| Manufacturer part number | 231-740/001-000 | |
| Series | 231 Series | |
| Product family | MCS MIDI Classic | |
| Product designation | THT male header; 1.0 × 1.0 mm solder pin; straight | |
| Product type | PCB-mounted pluggable connector header | |
| Connector system | MCS – Multi Connection System | |
| Connector gender | Male / pin | |
| Number of electrical potentials | 10 | |
| Number of solder pins per potential | 1 | |
| Number of rows | 1 | |
| Number of levels | 1 | |
| Nominal pin spacing | 7.62 mm | |
| PCB connection technology | Through-hole technology (THT) | |
| Termination method | Solder | |
| Header orientation | Straight / vertical | |
| Mating direction relative to PCB | 90° | |
| Solder pin dimensions | 1.0 × 1.0 mm | |
| Solder pin length | 5 mm | |
| Drilled hole diameter | 1.4 mm (+0.1 mm tolerance) | |
| Rated current (IEC) | 12 A | |
| Rated voltage (IEC, III/3) | 500 V | |
| Rated voltage (IEC, III/2) | 630 V | |
| Rated voltage (IEC, II/2) | 1000 V | |
| Rated impulse voltage (IEC) | 6 kV | |
| Rated current (UL) | 10 A | |
| Rated voltage (UL) | 600 V | |
| Mounting type | PCB through-hole mounting | |
| Contact arrangement | Single-row, straight pins | |
| Contact shrouding | Four-sided | |
| Housing material | Polyamide 66 (PA66) | |
| Contact material | Electrolytic copper | |
| Contact plating | Tin | |
| Flammability classification | UL 94 V-0 | |
| Temperature limit range | −60 to +100 °C | |
| Width | 76.78 mm | |
| Height | 17 mm | |
| Depth | 8.4 mm | |
| Height above PCB | 12 mm | |
| Approximate weight | 3.91 g | |
| GTIN / EAN | 4044918867962 | |
| Manufacturer product reference | WAGO 231-740/001-000 |
The WAGO 231-740/001-000 is a 10-pole straight THT male PCB header designed to provide a detachable electrical interface between a printed circuit board and a compatible female connector in industrial control and automation equipment.
The connector has 10 poles, arranged in a single row with a nominal 7.62 mm contact pitch and one solder pin per electrical potential.
The WAGO 231-740/001-000 uses vertical through-hole PCB mounting with straight 1.0 × 1.0 mm square solder pins and a 5 mm solder tail length.
The connector has an IEC rated current of 12 A. Its IEC rated voltages are 500 V under category III/3, 630 V under category III/2 and 1000 V under category II/2 conditions. The applicable rating depends on the installation environment and relevant standards.
No. The WAGO 231-740/001-000 is a male PCB header with solder pins. CAGE CLAMP® spring pressure conductor termination is used by compatible female cable connectors within the MCS MIDI Classic system.
The 231-740/001-000 has straight solder pins for vertical PCB mounting, while the 231-940/001-000 has angled solder pins for a different mating orientation. Both are 10-pole MCS MIDI Classic male headers with a nominal 7.62 mm pitch.
The connector measures 76.78 mm wide, 17 mm high and 8.4 mm deep, with an approximate weight of 3.91 g.
No. The WAGO 231-740/001-000 is not intended for load-breaking operation. The electrical circuit must be safely isolated before connecting or disconnecting a mating connector.
The WAGO 231-740/001-000 combines a 10-pole male PCB interface, 7.62 mm contact pitch, straight THT solder pins and a shrouded mating design. As part of the MCS MIDI Classic system, it provides a practical solution for PCB-to-cable interconnections in industrial control electronics, modular machinery and professional automation equipment.
We use cookies
We use essential cookies to run this site, your basket and checkout. With your permission we'd also like to use analytics and advertising cookies to understand how the site is used and to measure our adverts.