Standard delivery
£8 ex VAT · free over £200UK parcel delivery is £8 ex VAT, or free on orders over £200 ex VAT.
Heavier items may be charged at a weight-based or pallet rate, shown at checkout.
£1.13
The WAGO 231-736/001-000 is a 6-pole straight male PCB header with through-hole solder termination, designed to provide reliable detachable electrical connections between printed circuit boards and compatible pluggable female connectors. Part of the WAGO MCS MIDI Classic 231 Series, this header combines a robust shrouded contact design, precise pin spacing and durable insulating materials for industrial electronics and automation applications.
Featuring a 7.62 mm contact pitch, the WAGO 231-736/001-000 uses 1 × 1 mm square solder pins with a 5 mm solder pin length. Its straight, vertical through-hole mounting arrangement provides a practical PCB connection interface, while the six male contacts allow a compatible female connector to be attached and removed during equipment assembly, servicing or replacement.
With an IEC rated current of 12 A and rated voltages up to 1000 V under specified insulation coordination conditions, this connector is suitable for industrial control, signal and power connections within its electrical ratings. Its orange PA66 polyamide housing, tin-plated electrolytic copper contacts, integrated coding capability and anti-rotation protection make it a dependable choice for industrial PCB interconnection systems.
The WAGO 231-736/001-000 provides a dependable through-hole PCB connection interface for industrial electronic equipment. Its six square solder pins are designed to pass through suitable plated PCB holes and be soldered into position, creating a secure electrical and mechanical connection between the header and the printed circuit board.
Unlike cable-side female connectors that use CAGE CLAMP® spring pressure terminals, the 231-736/001-000 is a male PCB header with solder pins. It forms the board-mounted side of a detachable connection system and can mate with suitable WAGO MCS MIDI Classic female connectors, including compatible 6-pole versions from the 231 Series. This separation between the soldered PCB interface and the removable cable connector helps simplify equipment assembly and servicing.
The 7.62 mm pitch, shrouded housing and anti-rotation protection support accurate connector alignment, while tin-plated contacts provide a conductive mating interface. Its compact construction and wide temperature limit range make it suitable for many industrial control applications. The complete connector assembly must be operated within the applicable electrical ratings and should not be connected or disconnected while energised or under load.
Tick the specs you need, then view products that match.
| Current | 12 A | |
|---|---|---|
| Voltage | 630 V | |
| Product Series | WAGO 231 | |
| Rated surge voltage | 6 kV | |
| Number of plug-in contact rows | 1 | |
| Flammability class of insulation material according to UL 94 | V0 | |
| Operating temperature | -60 – 100 °C | |
| Rated current In | 12 A | |
| Material insulation body | Thermoplastic | |
| Housing colour | Orange | |
| Modular spacing contacts | 7.62 mm | |
| Angle PCB/contact | 90° (upwards vertical) | |
| Contact type | Pin | |
| Type of electric connection | Soldering connection | |
| Type of fastening | Solder | |
| Type of connection | Flexible PCB-connector | |
| Length pin | 5 mm | |
| Modular spacing connections | 7.62 mm | |
| Number of poles | 6 | |
| Connector model | Free connector | |
| Suitable for PCB thickness | 1.5 mm | |
| Type of banding | None | |
| Rated voltage | 630 V | |
| Material of contact surface | Tin | |
| Pollution degree | 2 | |
| Overvoltage category | III | |
| Type of PCB fastening | Connecting contact | |
| Manufacturer | WAGO | |
| Series | MCS MIDI Classic 231 Series | |
| Manufacturer part number | 231-736/001-000 | |
| Product type | Straight through-hole male PCB header | |
| Connector configuration | Male header / plug | |
| Number of contacts | 6 | |
| Total number of potentials | 6 | |
| Number of levels | 1 | |
| Number of contact rows | 1 | |
| Contact pitch | 7.62 mm | |
| Rated current (IEC) | 12 A | |
| Rated voltage (IEC, III/3) | 500 V | |
| Rated voltage (IEC, III/2) | 630 V | |
| Rated voltage (IEC, II/2) | 1000 V | |
| Rated impulse withstand voltage (IEC) | 6 kV | |
| Rated current (UL 1977) | 10 A | |
| Rated voltage (UL 1977) | 600 V | |
| PCB contact technology | Through-hole technology (THT) | |
| Termination method | Solder connection | |
| PCB mounting type | Through-hole mounting | |
| Header orientation | Straight / vertical | |
| Mating direction relative to PCB | 90° | |
| Connector gender | Male | |
| Contact arrangement | Single-row, inline | |
| Solder pins per potential | 1 | |
| Solder pin dimensions | 1 × 1 mm | |
| Solder pin length | 5 mm | |
| Recommended drilled hole diameter | 1.4 mm (+0.1 mm) | |
| Connector width | 46.3 mm | |
| Connector height | 17 mm | |
| Height above PCB surface | 12 mm | |
| Connector depth | 8.4 mm | |
| Dimensions (W × H × D) | 46.3 × 17 × 8.4 mm | |
| Weight | approx. 2.4 g | |
| Housing material | Polyamide PA66 | |
| Insulation material group | I | |
| Contact material | Electrolytic copper | |
| Contact plating | Tin | |
| Flammability classification | UL94 V-0 | |
| Temperature limit range | −60 to +100 °C | |
| Coding capability | Variable coding | |
| Anti-rotation protection | Yes | |
| Mismating protection | No integral mismating protection | |
| GTIN / EAN | 4044918867832 |
The WAGO 231-736/001-000 is a 6-pole straight male PCB header used to create detachable electrical connections between printed circuit boards and compatible female connectors in industrial automation, control electronics and machinery.
The header has 6 poles, arranged in a single row with a 7.62 mm contact pitch. Each electrical potential has one through-hole solder pin.
The WAGO 231-736/001-000 has an IEC rated current of 12 A, with rated voltages of 500 V under category III/3, 630 V under category III/2 and 1000 V under category II/2 conditions. Its UL 1977 ratings are 10 A and 600 V.
The header uses through-hole technology (THT) with six 1 × 1 mm square solder pins, each measuring 5 mm in length. The manufacturer's specified drilled hole diameter is 1.4 mm (+0.1 mm), and the header is soldered into the PCB.
The header is designed to mate with compatible 6-pole WAGO MCS MIDI Classic female connectors using the same 7.62 mm pitch. Suitable counterparts include selected WAGO 231-706 variants, subject to the required mechanical features, coding and connector configuration.
WAGO MCS MIDI Classic connectors provide dependable electrical interconnections for industrial automation, PCB manufacturing and machine building. The WAGO 231-736/001-000 combines a 6-pole male interface, 7.62 mm contact pitch, robust through-hole solder pins and a flame-retardant housing to support reliable, modular industrial electronic assemblies.
We use cookies
We use essential cookies to run this site, your basket and checkout. With your permission we'd also like to use analytics and advertising cookies to understand how the site is used and to measure our adverts.