Standard delivery
£8 ex VAT · free over £200UK parcel delivery is £8 ex VAT, or free on orders over £200 ex VAT.
Heavier items may be charged at a weight-based or pallet rate, shown at checkout.
£0.9265
The WAGO 231-735/001-000 is a professional-grade 5-pole THT male PCB header from the WAGO MCS MIDI Classic 231 Series. Designed for dependable printed circuit board interconnections, it features 7.62 mm contact spacing, straight 1.0 × 1.0 mm solder pins and a durable orange insulating housing. This pluggable connector provides a practical interface between industrial electronic equipment and compatible detachable female connectors.
Unlike cable-mounted female connectors that terminate individual conductors, the WAGO 231-735/001-000 is designed for direct through-hole mounting onto a printed circuit board. Its five straight solder pins are inserted into a suitable PCB footprint and soldered to establish permanent electrical connections. The male contact interface then allows a compatible female connector to be attached or removed when the circuit is safely de-energised.
With an IEC rated current of 12 A, voltage ratings of up to 1,000 V under specified IEC conditions and a robust polyamide PA66 housing, the WAGO 231-735/001-000 is suitable for industrial control electronics, machinery interfaces and modular electrical assemblies. Its compact construction, tin-plated copper contacts and integrated coding fingers support reliable PCB-to-cable connections in professionally designed equipment.
The WAGO 231-735/001-000 uses through-hole technology to create a permanent electrical and mechanical connection to a printed circuit board. Each of its five 1.0 × 1.0 mm square solder pins is inserted through a correctly specified PCB hole and soldered using an appropriate assembly process. This arrangement is well suited to industrial electronic equipment where connector mating forces and reliable PCB connections must be considered during design.
The header features a straight solder pin arrangement with a 5 mm pin length and 7.62 mm spacing between adjacent contacts. The recommended PCB drilled hole diameter is 1.4 mm with a +0.1 mm tolerance. These dimensions are important when preparing PCB layouts and manufacturing drawings.
Once soldered into the board, the connector provides a five-pole male mating interface for an appropriately matched female connector. Its 90° mating direction relative to the PCB allows the mating connector to engage perpendicular to the board surface, supporting organised internal wiring and detachable equipment connections.
The WAGO MCS MIDI Classic system is designed to separate permanent PCB connections from detachable conductor-terminated wiring. Compatible female connectors may use CAGE CLAMP® spring pressure technology for cable termination, while the 231-735/001-000 itself uses solder pins rather than spring clamp conductor terminals.
The header incorporates coding fingers that support configurable connector mating arrangements. When suitable coding is applied across the connector system, these features can help distinguish electrical interfaces and reduce the likelihood of incorrect connections during equipment assembly or servicing.
Its tin-plated electrolytic copper contacts provide dependable electrical conductivity, while the orange PA66 insulating housing delivers mechanical support and electrical insulation. The housing material has a UL 94 V-0 flammability classification and a specified material temperature limit range of −60 to +100 °C. These temperature limits should not be interpreted as an unrestricted operating rating for every complete electrical assembly.
For safe operation, the WAGO 231-735/001-000 must not be connected or disconnected while energised or under load. The MCS MIDI Classic system is not designed for load-breaking operation. Equipment design should also ensure that accessible male contacts are not live when the mating connector is removed. Electrical ratings must be assessed for the complete connector system, PCB design and operating environment.
Tick the specs you need, then view products that match.
| Current | 12 A | |
|---|---|---|
| Voltage | 630 V | |
| Product Series | WAGO 231 | |
| Rated surge voltage | 6 kV | |
| Number of plug-in contact rows | 1 | |
| Flammability class of insulation material according to UL 94 | V0 | |
| Operating temperature | -60 – 100 °C | |
| Rated current In | 12 A | |
| Material insulation body | Thermoplastic | |
| Housing colour | Orange | |
| Modular spacing contacts | 7.62 mm | |
| Angle PCB/contact | 90° (upwards vertical) | |
| Contact type | Pin | |
| Type of electric connection | Soldering connection | |
| Type of fastening | Solder | |
| Type of connection | Flexible PCB-connector | |
| Length pin | 5 mm | |
| Modular spacing connections | 7.62 mm | |
| Number of poles | 5 | |
| Connector model | Free connector | |
| Suitable for PCB thickness | 1.5 mm | |
| Type of banding | None | |
| Rated voltage | 630 V | |
| Material of contact surface | Tin | |
| Pollution degree | 2 | |
| Overvoltage category | III | |
| Type of PCB fastening | Connecting contact | |
| Manufacturer | WAGO | |
| Series | MCS MIDI Classic 231 Series | |
| Manufacturer Part Number | 231-735/001-000 | |
| Product type | THT male PCB header | |
| Connector gender | Male | |
| Number of electrical potentials | 5 | |
| Number of connection levels | 1 | |
| PCB contact technology | Through-hole technology (THT) | |
| Termination method | Solder connection | |
| Solder pin orientation | Straight | |
| Solder pin arrangement | Single in-line row | |
| Solder pins per potential | 1 | |
| Solder pin cross-section | 1.0 × 1.0 mm | |
| Solder pin length | 5 mm | |
| PCB drilled hole diameter | 1.4 mm (+0.1 mm) | |
| Pin spacing | 7.62 mm | |
| Mating direction relative to PCB | 90° | |
| Rated current (IEC) | 12 A | |
| Rated voltage (IEC, III/3) | 500 V | |
| Rated voltage (IEC, III/2) | 630 V | |
| Rated voltage (IEC, II/2) | 1,000 V | |
| Rated impulse voltage (IEC) | 6 kV | |
| Rated voltage (UL 1059, use group B) | 300 V | |
| Rated current (UL 1059, use group B) | 10 A | |
| Rated voltage (UL 1059, use group D) | 300 V | |
| Rated current (UL 1059, use group D) | 10 A | |
| Mating connector | Compatible WAGO female pluggable connector | |
| Variable coding | Yes | |
| Contact material | Electrolytic copper | |
| Contact plating | Tin | |
| Insulating material | Polyamide 66 (PA66) | |
| Flammability classification | UL 94 V-0 | |
| Material temperature limit range | −60 to +100 °C | |
| Width | 38.68 mm | |
| Height | 17 mm | |
| Height above PCB surface | 12 mm | |
| Depth | 8.4 mm | |
| Dimensions (W × H × D) | 38.68 × 17 × 8.4 mm | |
| Weight | Approximately 2.05 g | |
| GTIN / EAN | 4044918867818 | |
| Country of origin | Germany | |
| Relevant standards | IEC/EN 60664-1 and UL 1059 |
The WAGO 231-735/001-000 is a 5-pole THT male PCB header designed to create a detachable electrical interface between a printed circuit board and a compatible female connector. It is commonly suited to industrial automation equipment, electronic controllers, machinery and modular electrical assemblies.
The WAGO 231-735/001-000 features 5 electrical poles with a 7.62 mm contact pitch. It uses five straight solder pins arranged in a single line, with one solder pin for each electrical potential.
The connector features straight 1.0 × 1.0 mm square solder pins with a 5 mm pin length. The specified PCB drilled hole diameter is 1.4 mm with a +0.1 mm tolerance. PCB designers should use the manufacturer dimensional drawing when preparing the final footprint.
The WAGO 231-735/001-000 has an IEC rated current of 12 A. Its IEC voltage ratings are 500 V under category III/3, 630 V under category III/2 and 1,000 V under category II/2 conditions. Under UL 1059 use groups B and D, the listed ratings are 300 V and 10 A.
The WAGO 231-735/001-000 is a male PCB header and uses through-hole solder pins rather than CAGE CLAMP conductor termination. Compatible female connectors within the WAGO MCS MIDI Classic system may use CAGE CLAMP® spring pressure connections to terminate external wiring.
WAGO MCS MIDI Classic connectors are designed to support dependable, modular electrical interconnections in industrial automation, machinery and electronic equipment. The WAGO 231-735/001-000 combines a practical five-pole configuration, straight through-hole solder pins and a pluggable male interface to provide a reliable connection solution for professionally designed PCB assemblies.
We use cookies
We use essential cookies to run this site, your basket and checkout. With your permission we'd also like to use analytics and advertising cookies to understand how the site is used and to measure our adverts.