Standard delivery
£8 ex VAT · free over £200UK parcel delivery is £8 ex VAT, or free on orders over £200 ex VAT.
Heavier items may be charged at a weight-based or pallet rate, shown at checkout.
£5.97
The WAGO 231-712/008-000 is a high-performance 12-pole pluggable female terminal block connector with snap-in mounting feet, designed for reliable electrical interconnections in industrial automation, control panels, machinery and electrical equipment. Part of the established WAGO MCS MIDI Classic 231 Series, this connector uses proven CAGE CLAMP® spring pressure connection technology to deliver secure, screwless conductor termination.
Designed for efficient installation and dependable mechanical integration, the WAGO 231-712/008-000 combines a detachable multi-pole electrical interface with integrated snap-in mounting feet. These allow the connector to be securely fitted into compatible mounting panels, while the spring pressure termination system maintains consistent conductor contact force. Parallel and perpendicular CAGE CLAMP® actuation provides flexibility during cable pre-assembly and wiring directly within industrial equipment.
Featuring 12 independent connection poles, a 7.62 mm contact pitch and a 16 A IEC rated current, the WAGO 231-712/008-000 is a practical choice for modular industrial power and control wiring. It accommodates solid and fine-stranded copper conductors from 0.08–2.5 mm² and incorporates a durable orange polyamide PA66 housing, tin-plated copper alloy contacts, integrated test ports and configurable coding features.
The WAGO 231-712/008-000 incorporates WAGO's proven CAGE CLAMP® spring pressure connection technology, designed to provide reliable electrical contact without conventional terminal screws. The spring mechanism applies consistent pressure to the inserted conductor, helping maintain dependable connections in industrial environments where vibration, mechanical movement and temperature variations may occur.
During installation, a suitable operating tool opens the spring clamp so that the prepared conductor can be inserted into the terminal. Removing the tool allows the spring to securely retain the wire. The connector supports parallel and perpendicular tool actuation, providing flexible access during cable pre-assembly and wiring directly within industrial equipment or control cabinets.
The 12-pole configuration provides twelve independent electrical connections through one detachable assembly. Its 7.62 mm contact spacing supports integration with appropriately specified mating connectors from the WAGO MCS MIDI Classic system, making it suitable for organised multi-circuit wiring and modular equipment construction.
A key feature of the 231-712/008-000 is its integrated snap-in mounting feet. These allow the connector to be securely attached to compatible mounting panels without separate screw-mounted brackets. The mounting arrangement accommodates panel thicknesses of 0.6–1.2 mm, while integrated anti-rotation protection helps maintain stable mechanical positioning.
The connector also incorporates integrated test ports and coding fingers. Test ports provide convenient access for electrical measurements during commissioning, inspection and troubleshooting. Coding fingers support configurable mating arrangements, helping installers organise multiple connector assemblies and reduce the likelihood of incorrect connections when suitable coding is applied.
Its tin-plated copper alloy contacts provide dependable electrical conductivity, while the orange polyamide PA66 housing offers durable electrical insulation and mechanical protection. The housing material has a UL 94 V-0 flammability classification, supporting integration into properly designed industrial electrical equipment.
For safe operation, the WAGO 231-712/008-000 should only be connected or disconnected when the relevant electrical circuit has been safely de-energised. The connector is not intended for load-breaking operation. Installations must observe the applicable electrical ratings, environmental conditions and mating compatibility requirements.
Tick the specs you need, then view products that match.
| Current | 16 A | |
|---|---|---|
| Voltage | 630 V | |
| Product Series | WAGO 231 | |
| Rated surge voltage | 6 kV | |
| Number of plug-in contact rows | 1 | |
| Connectable cable type | Tubular cable | |
| Flammability class of insulation material according to UL 94 | V0 | |
| Operating temperature | -60 – 85 °C | |
| Rated current In | 16 A | |
| Connectable conductor cross section fine-strand without cable end sleeve | 0.08 – 2.5 mm² | |
| Degree of protection (IP), mounted | IP20 | |
| Material insulation body | Thermoplastic | |
| Coating housing | Uncoated | |
| Connectable conductor cross section multi-wired | 0.08 – 2.5 mm² | |
| Housing colour | Orange | |
| Modular spacing contacts | 7.62 mm | |
| Angle contact/conductor connection | 180° (horizontal) | |
| Contact type | Bus | |
| Material contact | Other copper alloys | |
| Type of electric connection | Spring clamp connection | |
| Housing material | Plastic | |
| Type of connection | Printed circuit board to cable | |
| Connectable conductor cross section fine-strand with cable end sleeve | 0.25 – 1.5 mm² | |
| Modular spacing connections | 7.62 mm | |
| Number of poles | 12 | |
| Material of contact surface | Tin | |
| Rated voltage | 630 V | |
| Pollution degree | 2 | |
| Connectable conductor cross section solid-core | 0.08 – 2.5 mm² | |
| Overvoltage category | III | |
| Manufacturer | WAGO | |
| Series | MCS MIDI Classic 231 Series | |
| Manufacturer Part Number | 231-712/008-000 | |
| Product type | 1-conductor female pluggable terminal block connector with snap-in mounting feet | |
| Connector gender | Female | |
| Number of connection points | 12 | |
| Number of potentials | 12 | |
| Number of connection levels | 1 | |
| Conductors per connection | 1 | |
| Connection technology | CAGE CLAMP® spring pressure connection | |
| Termination type | Screwless spring clamp | |
| Actuation method | Operating tool | |
| Actuation directions | Parallel and perpendicular to conductor entry | |
| Pin spacing | 7.62 mm | |
| Rated current (IEC) | 16 A | |
| Rated voltage (IEC, III/3) | 500 V | |
| Rated voltage (IEC, III/2) | 630 V | |
| Rated voltage (IEC, II/2) | 1,000 V | |
| Rated impulse voltage (IEC) | 6 kV | |
| Rated voltage (UL 1977) | 600 V | |
| Rated current (UL 1977) | 15 A | |
| Rated voltage (UL 1059, use group B) | 300 V | |
| Rated current (UL 1059, use group B) | 15 A | |
| Rated voltage (UL 1059, use group D) | 300 V | |
| Rated current (UL 1059, use group D) | 10 A | |
| Solid conductor cross-section | 0.08–2.5 mm² | |
| Fine-stranded conductor cross-section | 0.08–2.5 mm² | |
| Conductor size | 28–12 AWG | |
| Fine-stranded conductor with insulated ferrule | 0.25–1.5 mm² | |
| Fine-stranded conductor with uninsulated ferrule | 0.25–2.5 mm² | |
| Wire stripping length | 8–9 mm | |
| Conductor entry direction relative to mating direction | 0° | |
| Mounting type | Snap-in mounting feet | |
| Mounting arrangement | Panel mounting | |
| Compatible mounting panel thickness | 0.6–1.2 mm | |
| Anti-rotation protection | Yes | |
| Variable coding | Yes | |
| Integrated test ports | Yes | |
| Contact material | Copper alloy | |
| Contact plating | Tin | |
| Clamping spring material | Chrome-nickel spring steel | |
| Colour | Orange | |
| Flammability rating | UL 94 V-0 | |
| Temperature limit range | −60 to +85 °C | |
| Width | 90.4 mm | |
| Height | 18.8 mm | |
| Height from mounting surface | 14.3 mm | |
| Depth | 26.45 mm | |
| Dimensions (W × H × D) | 90.4 × 18.8 × 26.45 mm | |
| Weight | approx. 25.58 g | |
| GTIN / EAN | 4044918375818 | |
| Country of origin | Germany | |
| Relevant standards and approvals | IEC/EN 60664-1, UL 1059, UL 1977 and CSA |
The WAGO 231-712/008-000 is a 12-pole pluggable female terminal block connector designed for electrical interconnections in industrial automation, control panels, machinery and electronic equipment. Its integrated snap-in mounting feet allow secure installation in compatible mounting panels.
The connector features 12 individual connection poles arranged at a 7.62 mm contact pitch. Each pole provides an independent electrical connection, allowing twelve conductors or circuits to be connected through one pluggable assembly.
The connector accepts solid and fine-stranded copper conductors from 0.08–2.5 mm², equivalent to approximately 28–12 AWG. Fine-stranded conductors with insulated ferrules are supported from 0.25–1.5 mm², while uninsulated ferrules are supported from 0.25–2.5 mm². The recommended conductor stripping length is 8–9 mm.
The WAGO 231-712/008-000 has an IEC rated current of 16 A. Its IEC voltage ratings are 500 V under category III/3, 630 V under category III/2 and 1,000 V under category II/2 conditions. Under UL 1977, the connector is rated at 600 V and 15 A. UL 1059 ratings vary according to the applicable use group.
The connector features integrated snap-in mounting feet designed for compatible mounting panels with a thickness of 0.6–1.2 mm. Conductors are terminated using CAGE CLAMP® spring pressure technology with a suitable operating tool. Parallel and perpendicular actuation, integrated test ports and configurable coding features help simplify installation and maintenance.
WAGO MCS MIDI Classic connectors are engineered for dependable, efficient and maintenance-friendly electrical connections in industrial automation, machinery and control equipment. The WAGO 231-712/008-000 combines proven CAGE CLAMP® technology, a versatile 12-pole configuration and secure snap-in mounting feet to provide reliable electrical interconnections for modular industrial wiring systems.
We use cookies
We use essential cookies to run this site, your basket and checkout. With your permission we'd also like to use analytics and advertising cookies to understand how the site is used and to measure our adverts.