Standard delivery
£8 ex VAT · free over £200UK parcel delivery is £8 ex VAT, or free on orders over £200 ex VAT.
Heavier items may be charged at a weight-based or pallet rate, shown at checkout.
£5.22
The WAGO 231-710/037-000 is a 10-pole, 1-conductor female connector with lateral locking levers from the WAGO MCS MIDI Classic 231 Series. Designed for dependable industrial electrical interconnections, this pluggable connector combines a 7.62 mm contact pitch, WAGO's proven CAGE CLAMP® spring pressure connection technology and an integrated locking mechanism to provide a secure, detachable electrical interface for automation systems, machinery and control equipment.
With an IEC rated current of 16 A and compatibility with solid and fine-stranded copper conductors from 0.08 to 2.5 mm² (28–12 AWG), the WAGO 231-710/037-000 accommodates ten independent electrical circuits within a single connector assembly. Its spring pressure terminals eliminate conventional clamping screws, while the lateral locking levers provide additional mechanical retention when connected to appropriately matched mating components.
The connector features an orange PA66 insulating housing, tin-plated copper alloy contacts and a free-hanging, in-line mounting configuration. Its 90.26 mm width and positive locking arrangement make it suitable for modular cable harnesses, industrial electronic equipment and detachable wiring assemblies where reliable electrical contact and secure connector engagement are important.
The WAGO 231-710/037-000 combines established CAGE CLAMP® spring pressure termination with a lateral locking lever mechanism. The spring clamps maintain contact force on correctly prepared conductors without conventional terminal screws, helping provide dependable electrical connections during normal vibration and temperature variation.
Its 10-pole female interface allows ten independent circuits to be grouped into a single detachable connector. The lateral locking levers provide additional mechanical retention when paired with suitable mating components, making the connector particularly useful in modular machinery, industrial control equipment and pre-assembled wiring harnesses. Variable coding capability supports connector differentiation, although the product does not provide inherent mismating protection without an appropriately configured coding arrangement.
The connector's orange PA66 housing, tin-plated copper alloy contacts and chrome-nickel spring steel clamping elements support dependable industrial electrical interconnection. Correct conductor preparation, compatible mating component selection and adherence to applicable electrical ratings remain essential. The connector is not intended for load-breaking operation and must not be connected or disconnected while live or under load.
Tick the specs you need, then view products that match.
| Current | 16 A | |
|---|---|---|
| Voltage | 630 V | |
| Product Series | WAGO 231 | |
| Rated surge voltage | 6 kV | |
| Number of plug-in contact rows | 1 | |
| Connectable cable type | Tubular cable | |
| Flammability class of insulation material according to UL 94 | V0 | |
| Operating temperature | -60 – 85 °C | |
| Rated current In | 16 A | |
| Connectable conductor cross section fine-strand without cable end sleeve | 0.08 – 2.5 mm² | |
| Degree of protection (IP), mounted | IP20 | |
| Material insulation body | Thermoplastic | |
| Coating housing | Uncoated | |
| Connectable conductor cross section multi-wired | 0.08 – 2.5 mm² | |
| Housing colour | Orange | |
| Modular spacing contacts | 7.62 mm | |
| Angle contact/conductor connection | 180° (horizontal) | |
| Contact type | Bus | |
| Material contact | Other copper alloys | |
| Type of electric connection | Spring clamp connection | |
| Housing material | Plastic | |
| Type of connection | Printed circuit board to cable | |
| Connectable conductor cross section fine-strand with cable end sleeve | 0.25 – 1.5 mm² | |
| Modular spacing connections | 7.62 mm | |
| Number of poles | 10 | |
| Material of contact surface | Tin | |
| Rated voltage | 630 V | |
| Pollution degree | 2 | |
| Connectable conductor cross section solid-core | 0.08 – 2.5 mm² | |
| Overvoltage category | III | |
| Manufacturer | WAGO | |
| Manufacturer part number | 231-710/037-000 | |
| Series | 231 Series | |
| Product family | MCS MIDI Classic | |
| Product designation | 1-conductor female connector with lateral locking levers | |
| Product type | Pluggable terminal block connector | |
| Connector system | MCS – Multi Connection System | |
| Connector gender | Female / socket | |
| Number of conductor connections | 10 | |
| Number of electrical potentials | 10 | |
| Conductors per pole | 1 | |
| Number of levels | 1 | |
| Nominal pin spacing | 7.62 mm | |
| Connection technology | CAGE CLAMP® | |
| Connection principle | Spring pressure connection | |
| Actuation type | Operating tool | |
| Actuation directions | Parallel and perpendicular to conductor entry | |
| Locking mechanism | Lateral locking levers | |
| Rated current (IEC) | 16 A | |
| Rated voltage (IEC, III/3) | 500 V | |
| Rated voltage (IEC, III/2) | 630 V | |
| Rated voltage (IEC, II/2) | 1000 V | |
| Rated impulse voltage (IEC) | 6 kV | |
| Rated voltage (UL 1059, Use Group B) | 300 V | |
| Rated current (UL 1059, Use Group B) | 15 A | |
| Rated voltage (UL 1059, Use Group D) | 300 V | |
| Rated current (UL 1059, Use Group D) | 10 A | |
| Rated voltage (UL 1977) | 600 V | |
| Rated current (UL 1977) | 15 A | |
| Solid conductor cross-section | 0.08–2.5 mm² | |
| Fine-stranded conductor cross-section | 0.08–2.5 mm² | |
| Conductor size | 28–12 AWG | |
| Fine-stranded conductor with insulated ferrule | 0.25–1.5 mm² | |
| Fine-stranded conductor with uninsulated ferrule | 0.25–2.5 mm² | |
| Conductor stripping length | 8–9 mm | |
| Mounting type | Free-hanging / in-line | |
| Plug wire entry | 180° | |
| Conductor entry direction relative to mating direction | 0° | |
| Variable coding | Yes | |
| Anti-rotation protection | Yes | |
| Mismating protection | No inherent mismating protection | |
| Contact material | Copper alloy | |
| Contact plating | Tin | |
| Clamping spring material | Chrome-nickel spring steel | |
| Flammability classification | UL 94 V-0 | |
| Temperature limit range | −60 to +85 °C | |
| Width | 90.26 mm | |
| Height | 14.3 mm | |
| Depth | 29.6 mm | |
| Approximate weight | 22.45 g | |
| Country of origin | Germany | |
| GTIN / EAN | 4044918376808 | |
| Manufacturer product reference | WAGO 231-710/037-000 |
The WAGO 231-710/037-000 is a 10-pole female pluggable connector with lateral locking levers, designed for secure detachable electrical connections in industrial automation, control equipment and modular cable assemblies.
The connector has 10 poles, providing ten independent electrical connection positions with one conductor connection per pole and a nominal 7.62 mm pin spacing.
The lateral locking levers provide mechanical retention when the female connector is paired with a compatible mating component, helping prevent unintended separation of the pluggable electrical connection.
The connector accepts solid and fine-stranded copper conductors from 0.08 to 2.5 mm² (28–12 AWG). Insulated ferrules are supported from 0.25 to 1.5 mm², and uninsulated ferrules from 0.25 to 2.5 mm². The specified stripping length is 8–9 mm.
The WAGO 231-710/037-000 has an IEC rated current of 16 A. Its IEC rated voltage is 500 V under category III/3, 630 V under category III/2 and 1000 V under category II/2 conditions. The applicable rating depends on the installation environment and relevant standards.
The 231-710/037-000 features lateral locking levers and a free-hanging mounting arrangement, while the 231-710/031-000 uses a clamping collar and mounting flange configuration for compatible mechanically mounted connector assemblies.
The connector measures 90.26 mm wide, 14.3 mm high and 29.6 mm deep, with an approximate weight of 22.45 g.
No. Pluggable connectors without breaking capacity must not be connected or disconnected while live or under load. The electrical circuit must be safely isolated before mating or unmating the connector.
The WAGO 231-710/037-000 combines a 10-pole female connector interface, 7.62 mm contact pitch, CAGE CLAMP® spring pressure termination and lateral locking levers. As part of the MCS MIDI Classic system, it provides a practical solution for organised industrial wiring, dependable conductor connections and mechanically retained detachable electrical interfaces in professional control equipment.
We use cookies
We use essential cookies to run this site, your basket and checkout. With your permission we'd also like to use analytics and advertising cookies to understand how the site is used and to measure our adverts.