Standard delivery
£8 ex VAT · free over £200UK parcel delivery is £8 ex VAT, or free on orders over £200 ex VAT.
Heavier items may be charged at a weight-based or pallet rate, shown at checkout.
£5.14
The WAGO 231-710/031-000 is a 10-pole, 1-conductor female plug with clamping collar and mounting flange from the WAGO MCS MIDI Classic 231 Series. Designed for industrial electrical interconnections, this pluggable connector combines a 7.62 mm contact pitch, proven CAGE CLAMP® spring pressure termination and mechanical retention features to provide a dependable detachable interface for control panels, automation equipment and modular machinery.
With a rated current of 16 A under IEC specifications, the connector supports solid and fine-stranded copper conductors from 0.08 to 2.5 mm² (28–12 AWG). Its ten independent connection positions allow multiple electrical circuits to be organised within a single pluggable assembly, simplifying cable pre-assembly, equipment installation and servicing.
The WAGO 231-710/031-000 features an orange insulating housing, tin-plated copper alloy contacts, integrated test ports and coding fingers. Its mounting flange and retention features make it particularly suitable for compatible panel-mounted and feed-through connector arrangements where reliable electrical contact and secure mechanical positioning are required.
The WAGO 231-710/031-000 combines WAGO's established CAGE CLAMP® spring pressure connection technology with a clamping collar and mounting flange. The spring pressure terminals maintain contact force on correctly prepared conductors without conventional terminal screws, helping support consistent electrical performance in industrial installations exposed to normal vibration and temperature variation.
Its 10-pole female interface allows ten electrical circuits to be grouped into a single detachable connection. The mounting flange and retention features support secure positioning in compatible equipment assemblies, making the connector useful where modular wiring must be combined with a mechanically retained interface.
Integrated test ports facilitate appropriate electrical measurements during commissioning and maintenance, while coding fingers support connector identification and compatible mating arrangements. Correct mating component selection, conductor preparation and adherence to the applicable electrical ratings are essential. The connector must not be connected or disconnected while live or under load because it does not provide load-breaking functionality.
Tick the specs you need, then view products that match.
| Current | 16 A | |
|---|---|---|
| Voltage | 630 V | |
| Product Series | WAGO 231 | |
| Rated surge voltage | 6 kV | |
| Number of plug-in contact rows | 1 | |
| Connectable cable type | Tubular cable | |
| Flammability class of insulation material according to UL 94 | V0 | |
| Operating temperature | -60 – 85 °C | |
| Rated current In | 16 A | |
| Connectable conductor cross section fine-strand without cable end sleeve | 0.08 – 2.5 mm² | |
| Degree of protection (IP), mounted | IP20 | |
| Material insulation body | Thermoplastic | |
| Coating housing | Uncoated | |
| Connectable conductor cross section multi-wired | 0.08 – 2.5 mm² | |
| Housing colour | Orange | |
| Modular spacing contacts | 7.62 mm | |
| Angle contact/conductor connection | 180° (horizontal) | |
| Contact type | Bus | |
| Material contact | Other copper alloys | |
| Type of electric connection | Spring clamp connection | |
| Housing material | Plastic | |
| Type of connection | Printed circuit board to cable | |
| Connectable conductor cross section fine-strand with cable end sleeve | 0.25 – 1.5 mm² | |
| Modular spacing connections | 7.62 mm | |
| Number of poles | 10 | |
| Material of contact surface | Tin | |
| Rated voltage | 630 V | |
| Pollution degree | 2 | |
| Connectable conductor cross section solid-core | 0.08 – 2.5 mm² | |
| Overvoltage category | III | |
| Manufacturer | WAGO | |
| Manufacturer part number | 231-710/031-000 | |
| Series | 231 Series | |
| Product family | MCS MIDI Classic | |
| Product designation | 1-conductor female plug with clamping collar | |
| Product type | Pluggable terminal block connector | |
| Connector system | MCS – Multi Connection System | |
| Connector gender | Female / socket | |
| Number of conductor connections | 10 | |
| Number of electrical potentials | 10 | |
| Conductors per pole | 1 | |
| Number of rows | 1 | |
| Number of levels | 1 | |
| Nominal pin spacing | 7.62 mm | |
| Connection technology | CAGE CLAMP® | |
| Connection principle | Spring pressure connection | |
| Actuation type | Operating tool | |
| Rated current (IEC) | 16 A | |
| Rated voltage (IEC, II/2) | 1000 V | |
| Rated impulse voltage (IEC, II/2) | 6 kV | |
| Rated current (UL) | 15 A | |
| Rated voltage (UL) | 600 V | |
| Solid conductor cross-section | 0.08–2.5 mm² | |
| Fine-stranded conductor cross-section | 0.08–2.5 mm² | |
| Conductor size | 28–12 AWG | |
| Conductor stripping length | 8–9 mm | |
| Mounting configuration | Mounting flange with retention latches | |
| Mechanical configuration | Clamping collar | |
| Mounting type | Free-hanging / in-line connector with provision for compatible panel fixing | |
| Plug wire entry | 180° | |
| Test ports | Integrated | |
| Coding | Integrated coding fingers | |
| Contact material | Copper alloy | |
| Contact plating | Tin | |
| Flammability classification | UL 94 V-0 | |
| Temperature limit range | −60 to +85 °C | |
| Width | 88.46 mm | |
| Height | 14.3 mm | |
| Depth | 26.45 mm | |
| Approximate weight | 21.86 g | |
| Country of origin | Germany | |
| GTIN / EAN | 4044918376792 | |
| RoHS status | Compliant | |
| Manufacturer product reference | WAGO 231-710/031-000 |
The WAGO 231-710/031-000 is a 10-pole female pluggable connector with clamping collar and mounting flange, designed for detachable electrical connections in industrial automation, control equipment and compatible panel-mounted assemblies.
The connector has 10 poles, providing ten independent electrical connection positions with one conductor connection per pole and a nominal 7.62 mm pin spacing.
The clamping collar and mounting flange support mechanical retention and installation in compatible connector assemblies, helping maintain a secure detachable electrical interface.
The connector accepts suitable solid and fine-stranded copper conductors from 0.08 to 2.5 mm² (28–12 AWG). The specified conductor stripping length is 8–9 mm.
The WAGO 231-710/031-000 has an IEC rated current of 16 A and an IEC rated voltage of 1000 V under overvoltage category II and pollution degree 2. The applicable rating depends on the relevant standard and installation conditions.
No. It uses WAGO CAGE CLAMP® spring pressure technology, which secures conductors without conventional clamping screws. An appropriate operating tool is used during conductor installation and removal.
The connector measures 88.46 mm wide, 14.3 mm high and 26.45 mm deep, with an approximate weight of 21.86 g.
No. Pluggable connectors without breaking capacity must not be connected or disconnected while live or under load. The electrical circuit must be safely isolated before mating or unmating the connector.
The WAGO 231-710/031-000 combines a 10-pole female connector interface, 7.62 mm contact pitch, CAGE CLAMP® spring pressure termination and a clamping collar with mounting flange. As part of the MCS MIDI Classic system, it supports organised industrial wiring, secure mechanical installation and dependable detachable electrical connections in professional control equipment.
We use cookies
We use essential cookies to run this site, your basket and checkout. With your permission we'd also like to use analytics and advertising cookies to understand how the site is used and to measure our adverts.