Standard delivery
£8 ex VAT · free over £200UK parcel delivery is £8 ex VAT, or free on orders over £200 ex VAT.
Heavier items may be charged at a weight-based or pallet rate, shown at checkout.
£6.09
The WAGO 231-710/027-000 is a robust 10-pole pluggable female connector with an integrated clamping collar and CAGE CLAMP® spring pressure connection technology. Part of the WAGO MCS MIDI Classic 231 Series, this industrial connector is designed for secure, detachable electrical connections in control panels, machine building, industrial automation and modular electrical equipment.
Featuring a 7.62 mm contact pitch, the connector supports solid and fine-stranded copper conductors from 0.08–2.5 mm². Its CAGE CLAMP® spring pressure terminals enable screwless conductor termination, while vertical and horizontal actuation options simplify cable pre-assembly and wiring within electrical equipment.
The WAGO 231-710/027-000 has an IEC rated current of 16 A and a rated voltage of up to 1000 V under the applicable IEC overvoltage category II and pollution degree 2 conditions. Its distinctive clamping collar, mounting flange and retention features provide mechanical support for compatible connector assemblies, while integrated test ports and coding fingers make installation and maintenance more convenient.
The WAGO 231-710/027-000 uses proven CAGE CLAMP® spring pressure connection technology to provide dependable electrical contact in industrial wiring systems. Its spring-loaded clamping mechanism maintains consistent pressure on connected conductors, helping minimise the effects of vibration and normal temperature variations. The screwless termination design also simplifies installation and eliminates routine screw-terminal retightening.
Its 10-pole configuration and 7.62 mm contact pitch provide a practical detachable interface for industrial control and machinery wiring. Unlike basic free-hanging connector variants, the 231-710/027-000 incorporates a clamping collar and mounting flange, allowing the connector to be mechanically supported in compatible panel or equipment mounting arrangements.
The WAGO MCS MIDI Classic system supports modular equipment construction, efficient cable pre-assembly and straightforward servicing. Integrated test ports simplify electrical measurements, while coding fingers assist with connector identification. As this connector does not have load-breaking capability, it must not be connected or disconnected while energised or under load.
Tick the specs you need, then view products that match.
| Current | 16 A | |
|---|---|---|
| Voltage | 630 V | |
| Product Series | WAGO 231 | |
| Rated surge voltage | 6 kV | |
| Number of plug-in contact rows | 1 | |
| Connectable cable type | Tubular cable | |
| Flammability class of insulation material according to UL 94 | V0 | |
| Operating temperature | -60 – 85 °C | |
| Rated current In | 16 A | |
| Connectable conductor cross section fine-strand without cable end sleeve | 0.08 – 2.5 mm² | |
| Degree of protection (IP), mounted | IP20 | |
| Material insulation body | Thermoplastic | |
| Coating housing | Uncoated | |
| Connectable conductor cross section multi-wired | 0.08 – 2.5 mm² | |
| Housing colour | Orange | |
| Modular spacing contacts | 7.62 mm | |
| Angle contact/conductor connection | 180° (horizontal) | |
| Contact type | Bus | |
| Material contact | Other copper alloys | |
| Type of electric connection | Spring clamp connection | |
| Housing material | Plastic | |
| Type of connection | Printed circuit board to cable | |
| Connectable conductor cross section fine-strand with cable end sleeve | 0.25 – 1.5 mm² | |
| Modular spacing connections | 7.62 mm | |
| Number of poles | 10 | |
| Material of contact surface | Tin | |
| Rated voltage | 630 V | |
| Pollution degree | 2 | |
| Connectable conductor cross section solid-core | 0.08 – 2.5 mm² | |
| Overvoltage category | III | |
| Manufacturer | WAGO | |
| Series | MCS MIDI Classic 231 Series | |
| Model | 231-710/027-000 | |
| Product type | Pluggable female connector with clamping collar | |
| Connector configuration | 1-conductor female connector | |
| Number of connection points | 10 | |
| Number of potentials | 10 | |
| Number of levels | 1 | |
| Contact pitch | 7.62 mm | |
| Rated current (IEC) | 16 A | |
| Rated current (UL) | 15 A | |
| Rated voltage (IEC, III/3) | 500 V | |
| Rated voltage (IEC, III/2) | 630 V | |
| Rated voltage (IEC, II/2) | 1000 V | |
| Rated voltage (UL) | 600 V | |
| Rated impulse withstand voltage (IEC) | 6 kV | |
| Connection technology | CAGE CLAMP® spring pressure connection | |
| Solid conductor cross-section | 0.08–2.5 mm² | |
| Fine-stranded conductor cross-section | 0.08–2.5 mm² | |
| Fine-stranded conductor with insulated ferrule | 0.25–1.5 mm² | |
| Fine-stranded conductor with uninsulated ferrule | 0.25–2.5 mm² | |
| Conductor size | 28–12 AWG | |
| Conductor stripping length | 8–9 mm | |
| Actuation method | Operating tool | |
| Actuation access | Vertical and horizontal | |
| Connector gender | Female | |
| Contact configuration | Female sockets | |
| Conductor entry relative to mating direction | 180° | |
| Mounting arrangement | Panel / feed-through mounting | |
| Testing facility | Integrated test ports | |
| Coding capability | Integrated coding fingers | |
| Mismating protection | No | |
| Contact material | Copper alloy | |
| Contact plating | Tin | |
| Clamping spring material | Chrome-nickel spring steel | |
| Flammability classification | UL94 V-0 | |
| Temperature limit range | −60 to +85 °C | |
| Dimensions (W × H × D) | 88.46 × 14.3 × 26.45 mm | |
| Weight | approx. 22.25 g | |
| GTIN | 4044918376785 | |
| Country of origin | Germany |
The WAGO 231-710/027-000 is a 10-pole female pluggable connector with a clamping collar and mounting flange, designed for detachable electrical connections in industrial automation, control cabinets, machinery and modular electrical equipment.
The connector has 10 poles, providing ten separate conductor connection points with a 7.62 mm contact pitch.
The connector has an IEC rated current of 16 A and rated voltages of 500 V under category III/3, 630 V under category III/2 and 1000 V under category II/2 conditions. The applicable rating depends on the installation conditions and relevant approval requirements.
The WAGO 231-710/027-000 accepts solid and fine-stranded copper conductors from 0.08–2.5 mm², approximately 28–12 AWG. Fine-stranded conductors with insulated ferrules are supported from 0.25–1.5 mm², while those with uninsulated ferrules are supported from 0.25–2.5 mm².
The clamping collar and mounting flange provide mechanical support and retention for the connector in compatible equipment or panel mounting arrangements. They distinguish this variant from standard connector versions without a mounting flange and help provide a stable detachable electrical interface.
WAGO MCS MIDI Classic connectors provide dependable, maintenance-friendly electrical connections for industrial automation, machine building and control panel construction. The WAGO 231-710/027-000 combines 10-pole connectivity, proven CAGE CLAMP® spring pressure technology and an integrated clamping collar with mounting flange to support secure industrial electrical installations.
We use cookies
We use essential cookies to run this site, your basket and checkout. With your permission we'd also like to use analytics and advertising cookies to understand how the site is used and to measure our adverts.