Standard delivery
£8 ex VAT · free over £200UK parcel delivery is £8 ex VAT, or free on orders over £200 ex VAT.
Heavier items may be charged at a weight-based or pallet rate, shown at checkout.
£5.01
The WAGO 231-710/008-000 is a professional-grade 10-pole pluggable female terminal block connector with snap-in mounting feet, designed for dependable electrical connections in industrial automation, control panels, machinery and electrical equipment. Part of the established WAGO MCS MIDI Classic 231 Series, this connector features proven CAGE CLAMP® spring pressure connection technology for secure conductor termination without conventional terminal screws.
Designed for efficient wiring and reliable mechanical installation, the WAGO 231-710/008-000 combines a detachable multi-pole electrical interface with integrated snap-in mounting feet. These mounting features allow the connector to be secured to compatible panels, while the spring clamp system maintains consistent conductor contact pressure. Vertical and horizontal CAGE CLAMP® actuation also provides flexibility for cable pre-assembly and wiring directly within industrial equipment.
Featuring 10 independent connection poles, a 7.62 mm contact pitch and an IEC rated current of 16 A, the WAGO 231-710/008-000 provides a practical solution for modular industrial power and control wiring. It accommodates solid and fine-stranded copper conductors from 0.08–2.5 mm² and features a durable orange polyamide PA66 housing, tin-plated copper alloy contacts, integrated test ports and configurable coding features.
The WAGO 231-710/008-000 incorporates WAGO's proven CAGE CLAMP® spring pressure connection technology, designed to provide secure electrical contact without conventional terminal screws. The spring mechanism maintains consistent pressure on the inserted conductor, helping minimise the risk of loose connections caused by vibration, mechanical movement and thermal cycling.
During wiring, a suitable operating tool opens the spring clamp so that the prepared conductor can be inserted into the terminal. Removing the tool allows the spring to securely retain the conductor. The connector supports vertical and horizontal CAGE CLAMP® actuation, providing flexibility during cable pre-assembly and wiring directly within electrical cabinets or industrial equipment.
The 10-pole configuration provides ten independent electrical connections through one detachable assembly. Its 7.62 mm contact pitch supports integration with appropriately specified mating connectors from the WAGO MCS MIDI Classic system, making it suitable for organised power distribution, control wiring and modular equipment construction.
A distinguishing feature of the 231-710/008-000 is its integrated snap-in mounting feet. These enable secure mechanical attachment to compatible mounting panels without requiring separate screw-mounted brackets. The connector is designed for mounting panels with a thickness of 0.6–1.2 mm, while its anti-rotation protection helps maintain stable positioning during installation and operation.
The connector also incorporates integrated test ports and coding fingers. Test ports allow convenient electrical measurements during commissioning, inspection and fault diagnosis. Coding fingers support configurable mating arrangements, helping installers organise multiple connector assemblies and reduce the likelihood of incorrect connections when compatible coding components are used.
Its tin-plated copper alloy contacts provide dependable electrical conductivity, while the orange polyamide PA66 housing offers durable electrical insulation and mechanical protection. The insulating material has a UL 94 V-0 flammability classification, supporting use in appropriately designed industrial electrical assemblies.
For safe operation, the WAGO 231-710/008-000 must not be connected or disconnected while the circuit is energised or under load. The MCS MIDI Classic connector system is not intended for load-breaking operation, and installations must observe the applicable electrical ratings, environmental conditions and mating compatibility requirements.
Tick the specs you need, then view products that match.
| Current | 16 A | |
|---|---|---|
| Voltage | 630 V | |
| Product Series | WAGO 231 | |
| Rated surge voltage | 6 kV | |
| Number of plug-in contact rows | 1 | |
| Connectable cable type | Tubular cable | |
| Flammability class of insulation material according to UL 94 | V0 | |
| Operating temperature | -60 – 85 °C | |
| Rated current In | 16 A | |
| Connectable conductor cross section fine-strand without cable end sleeve | 0.08 – 2.5 mm² | |
| Degree of protection (IP), mounted | IP20 | |
| Material insulation body | Thermoplastic | |
| Coating housing | Uncoated | |
| Connectable conductor cross section multi-wired | 0.08 – 2.5 mm² | |
| Housing colour | Orange | |
| Modular spacing contacts | 7.62 mm | |
| Angle contact/conductor connection | 180° (horizontal) | |
| Contact type | Bus | |
| Material contact | Other copper alloys | |
| Type of electric connection | Spring clamp connection | |
| Housing material | Plastic | |
| Type of connection | Printed circuit board to cable | |
| Connectable conductor cross section fine-strand with cable end sleeve | 0.25 – 1.5 mm² | |
| Modular spacing connections | 7.62 mm | |
| Number of poles | 10 | |
| Material of contact surface | Tin | |
| Rated voltage | 630 V | |
| Pollution degree | 2 | |
| Connectable conductor cross section solid-core | 0.08 – 2.5 mm² | |
| Overvoltage category | III | |
| Manufacturer | WAGO | |
| Series | MCS MIDI Classic 231 Series | |
| Manufacturer Part Number | 231-710/008-000 | |
| Product type | 1-conductor female pluggable terminal block connector with snap-in mounting feet | |
| Connector gender | Female | |
| Number of connection points | 10 | |
| Number of potentials | 10 | |
| Number of connection levels | 1 | |
| Conductors per connection | 1 | |
| Connection technology | CAGE CLAMP® spring pressure connection | |
| Termination type | Screwless spring clamp | |
| Actuation method | Operating tool | |
| Actuation directions | Vertical and horizontal | |
| Pin spacing | 7.62 mm | |
| Rated current (IEC) | 16 A | |
| Rated voltage (IEC, III/3) | 500 V | |
| Rated voltage (IEC, III/2) | 630 V | |
| Rated voltage (IEC, II/2) | 1,000 V | |
| Rated impulse voltage (IEC) | 6 kV | |
| Rated voltage (UL) | 600 V | |
| Rated current (UL) | 15 A | |
| Solid conductor cross-section | 0.08–2.5 mm² | |
| Fine-stranded conductor cross-section | 0.08–2.5 mm² | |
| Conductor size | 28–12 AWG | |
| Fine-stranded conductor with insulated ferrule | 0.25–1.5 mm² | |
| Fine-stranded conductor with uninsulated ferrule | 0.25–2.5 mm² | |
| Wire stripping length | 8–9 mm | |
| Mounting type | Snap-in mounting feet | |
| Mounting arrangement | Panel mounting | |
| Compatible mounting panel thickness | 0.6–1.2 mm | |
| Anti-rotation protection | Yes | |
| Variable coding | Yes | |
| Integrated test ports | Yes | |
| Contact material | Copper alloy | |
| Contact plating | Tin | |
| Clamping spring material | Chrome-nickel spring steel | |
| Colour | Orange | |
| Flammability rating | UL 94 V-0 | |
| Temperature limit range | −60 to +85 °C | |
| Width | 75.16 mm | |
| Height | 18.8 mm | |
| Depth | 26.45 mm | |
| Dimensions (W × H × D) | 75.16 × 18.8 × 26.45 mm | |
| Weight | approx. 21.323 g | |
| GTIN / EAN | 4044918375788 | |
| Country of origin | Germany | |
| Relevant standards and approvals | IEC/EN 60664-1, UL 1059, UL 1977 and CSA |
The WAGO 231-710/008-000 is a 10-pole pluggable female terminal block connector designed for reliable electrical connections in industrial automation, control panels, machinery and electronic equipment. Its integrated snap-in mounting feet allow secure installation in compatible mounting panels.
The connector features 10 individual connection poles arranged at a 7.62 mm contact pitch. Each pole provides an independent electrical connection, allowing ten conductors or circuits to be connected through one pluggable assembly.
The connector accepts solid and fine-stranded copper conductors from 0.08–2.5 mm², equivalent to approximately 28–12 AWG. Fine-stranded conductors with insulated ferrules are supported from 0.25–1.5 mm², while uninsulated ferrules are supported from 0.25–2.5 mm². The recommended conductor stripping length is 8–9 mm.
The WAGO 231-710/008-000 has an IEC rated current of 16 A. Its IEC voltage ratings are 500 V under category III/3, 630 V under category III/2 and 1,000 V under category II/2 conditions. Under applicable UL approval conditions, the connector is rated at 600 V and 15 A.
The connector features integrated snap-in mounting feet designed for compatible mounting panels with a thickness of 0.6–1.2 mm. Conductors are connected using CAGE CLAMP® spring pressure technology, which requires a suitable operating tool rather than conventional terminal screws. Vertical and horizontal actuation, integrated test ports and coding features help simplify installation and maintenance.
WAGO MCS MIDI Classic connectors are designed for dependable, efficient and maintenance-friendly electrical connections in industrial automation, machinery and control equipment. The WAGO 231-710/008-000 combines proven CAGE CLAMP® technology, a versatile 10-pole configuration and secure snap-in mounting feet to provide reliable electrical interconnections for modular industrial wiring systems.
We use cookies
We use essential cookies to run this site, your basket and checkout. With your permission we'd also like to use analytics and advertising cookies to understand how the site is used and to measure our adverts.