Standard delivery
£8 ex VAT · free over £200UK parcel delivery is £8 ex VAT, or free on orders over £200 ex VAT.
Heavier items may be charged at a weight-based or pallet rate, shown at checkout.
£4.07
The WAGO 231-708/008-000 is a high-quality 8-pole pluggable female terminal block connector with snap-in mounting feet, designed for reliable electrical connections in industrial automation, control panels, machinery and lighting systems. Part of the established WAGO MCS MIDI Classic 231 Series, this connector features proven CAGE CLAMP® spring pressure connection technology for secure, screwless conductor termination.
Designed for efficient installation and dependable operation, the WAGO 231-708/008-000 combines a compact multi-pole configuration with convenient panel mounting. Its integrated snap-in mounting feet allow secure mechanical installation in compatible mounting panels, while the spring pressure termination system maintains consistent contact force without conventional terminal screws. Vertical and horizontal CAGE CLAMP® actuation makes conductor installation straightforward during cable pre-assembly and on-unit wiring.
Featuring 8 independent connection poles, a 7.62 mm contact pitch and a 16 A IEC rated current, the WAGO 231-708/008-000 provides a practical solution for modular industrial power and control connections. It accepts solid and fine-stranded copper conductors from 0.08–2.5 mm² and incorporates an orange polyamide PA66 housing, tin-plated copper alloy contacts, integrated test ports and connector coding features.
The WAGO 231-708/008-000 uses WAGO's established CAGE CLAMP® spring pressure connection technology to deliver dependable electrical contact without conventional terminal screws. Its spring-loaded clamping mechanism maintains consistent pressure on the inserted conductor, helping minimise loose electrical connections caused by vibration, temperature variation and mechanical movement.
During installation, a suitable operating tool opens the spring clamp so that the prepared conductor can be inserted into the terminal. Once the tool is removed, the spring mechanism securely retains the conductor. The connector supports vertical and horizontal CAGE CLAMP® actuation, allowing flexible wiring arrangements during cable pre-assembly or directly within electrical equipment.
The 8-pole configuration provides eight independent electrical connections within a single detachable assembly. With a 7.62 mm contact pitch, the connector is designed for use with appropriately specified mating components from the WAGO MCS MIDI Classic system. This arrangement supports modular equipment construction, organised control wiring and efficient maintenance.
A key feature of the 231-708/008-000 is its integrated snap-in mounting feet. These allow the connector to be mechanically secured in a compatible mounting panel without separate screw-mounted brackets. The mounting arrangement accommodates suitable panel thicknesses of 0.6–1.2 mm, helping simplify installation and provide stable connector positioning. Anti-rotation protection further supports secure mechanical integration.
The connector also incorporates integrated test ports and coding fingers. Test access enables convenient electrical measurements during commissioning and troubleshooting, while the coding system helps organise compatible mating arrangements and reduce connection errors when appropriately configured.
Its tin-plated copper alloy contacts provide dependable electrical conductivity, while the orange polyamide PA66 housing offers durable insulation and mechanical protection. The housing is classified UL 94 V-0 for flammability, making the connector suitable for properly designed industrial electrical assemblies.
For safe operation, the WAGO 231-708/008-000 should only be connected or disconnected when the relevant electrical circuit is de-energised. The connector is not intended for load-breaking operation, and installations must observe the applicable voltage, current, environmental and mating compatibility requirements.
Tick the specs you need, then view products that match.
| Current | 16 A | |
|---|---|---|
| Voltage | 630 V | |
| Product Series | WAGO 231 | |
| Rated surge voltage | 6 kV | |
| Number of plug-in contact rows | 1 | |
| Connectable cable type | Tubular cable | |
| Flammability class of insulation material according to UL 94 | V0 | |
| Operating temperature | -60 – 85 °C | |
| Rated current In | 16 A | |
| Connectable conductor cross section fine-strand without cable end sleeve | 0.08 – 2.5 mm² | |
| Degree of protection (IP), mounted | IP20 | |
| Material insulation body | Thermoplastic | |
| Coating housing | Uncoated | |
| Connectable conductor cross section multi-wired | 0.08 – 2.5 mm² | |
| Housing colour | Orange | |
| Modular spacing contacts | 7.62 mm | |
| Angle contact/conductor connection | 180° (horizontal) | |
| Contact type | Bus | |
| Material contact | Other copper alloys | |
| Type of electric connection | Spring clamp connection | |
| Housing material | Plastic | |
| Type of connection | Printed circuit board to cable | |
| Connectable conductor cross section fine-strand with cable end sleeve | 0.25 – 1.5 mm² | |
| Modular spacing connections | 7.62 mm | |
| Number of poles | 8 | |
| Material of contact surface | Tin | |
| Rated voltage | 630 V | |
| Pollution degree | 2 | |
| Connectable conductor cross section solid-core | 0.08 – 2.5 mm² | |
| Overvoltage category | III | |
| Manufacturer | WAGO | |
| Series | MCS MIDI Classic 231 Series | |
| Manufacturer Part Number | 231-708/008-000 | |
| Product type | Pluggable female terminal block connector with snap-in mounting feet | |
| Connector gender | Female | |
| Number of connection points | 8 | |
| Number of potentials | 8 | |
| Number of connection levels | 1 | |
| Conductors per connection | 1 | |
| Connection technology | CAGE CLAMP® spring pressure connection | |
| Termination type | Screwless spring clamp | |
| Actuation method | Operating tool | |
| Actuation directions | Vertical and horizontal | |
| Pin spacing | 7.62 mm | |
| Rated current (IEC) | 16 A | |
| Rated voltage (IEC, III/3) | 500 V | |
| Rated voltage (IEC, III/2) | 630 V | |
| Rated voltage (IEC, II/2) | 1,000 V | |
| Rated impulse voltage (IEC) | 6 kV | |
| Rated voltage (UL) | 600 V | |
| Rated current (UL) | 15 A | |
| Solid conductor cross-section | 0.08–2.5 mm² | |
| Fine-stranded conductor cross-section | 0.08–2.5 mm² | |
| Conductor size | 28–12 AWG | |
| Fine-stranded conductor with insulated ferrule | 0.25–1.5 mm² | |
| Fine-stranded conductor with uninsulated ferrule | 0.25–2.5 mm² | |
| Wire stripping length | 8–9 mm | |
| Mounting type | Snap-in mounting feet | |
| Mounting arrangement | Panel mounting | |
| Compatible mounting panel thickness | 0.6–1.2 mm | |
| Anti-rotation protection | Yes | |
| Variable coding | Yes | |
| Integrated test ports | Yes | |
| Contact material | Copper alloy | |
| Contact plating | Tin | |
| Clamping spring material | Chrome-nickel spring steel | |
| Colour | Orange | |
| Flammability rating | UL 94 V-0 | |
| Operating temperature range | −60 to +85 °C | |
| Width | 59.92 mm | |
| Height | 18.8 mm | |
| Depth | 26.45 mm | |
| Dimensions (W × H × D) | 59.92 × 18.8 × 26.45 mm | |
| Weight | approx. 17.1 g | |
| Country of origin | Germany | |
| GTIN / EAN | 4044918375764 | |
| Applicable standards and approvals | IEC/EN 60664-1, UL 1059, UL 1977 and CSA |
The WAGO 231-708/008-000 is an 8-pole pluggable female terminal block connector designed for electrical interconnections in industrial automation, control panels, machinery and lighting equipment. Its integrated snap-in mounting feet allow convenient installation in compatible mounting panels.
The connector features 8 individual connection poles arranged at a 7.62 mm contact pitch. Each pole provides an independent electrical connection, allowing eight conductors or circuits to be connected through one pluggable assembly.
The connector accepts solid and fine-stranded copper conductors from 0.08–2.5 mm², equivalent to approximately 28–12 AWG. Fine-stranded conductors with insulated ferrules are supported from 0.25–1.5 mm², while uninsulated ferrules are supported from 0.25–2.5 mm². The recommended conductor stripping length is 8–9 mm.
The WAGO 231-708/008-000 has an IEC rated current of 16 A. Its IEC rated voltage is 500 V under overvoltage category III, pollution degree 3 conditions, 630 V under category III, pollution degree 2 conditions and 1,000 V under category II, pollution degree 2 conditions. The connector also has 600 V and 15 A UL ratings under applicable approval conditions.
The connector features integrated snap-in mounting feet designed for compatible mounting panels with a thickness of 0.6–1.2 mm. Conductors are connected using CAGE CLAMP® spring pressure technology, which requires a suitable operating tool rather than conventional terminal screws. Vertical and horizontal actuation, integrated test ports and connector coding features help simplify installation and maintenance.
WAGO MCS MIDI Classic connectors are designed to provide dependable, efficient and maintenance-friendly electrical connections in industrial automation, machinery and control equipment. The WAGO 231-708/008-000 combines proven CAGE CLAMP® technology, a versatile 8-pole configuration and convenient snap-in mounting feet to deliver secure and practical electrical interconnections for industrial applications.
We use cookies
We use essential cookies to run this site, your basket and checkout. With your permission we'd also like to use analytics and advertising cookies to understand how the site is used and to measure our adverts.