Standard delivery
£8 ex VAT · free over £200UK parcel delivery is £8 ex VAT, or free on orders over £200 ex VAT.
Heavier items may be charged at a weight-based or pallet rate, shown at checkout.
£2.07
The WAGO 231-704/026-000 is a 4-pole, 1-conductor female connector from the WAGO MCS MIDI Classic 231 Series. Featuring CAGE CLAMP® spring pressure connection technology, a 7.62 mm pin spacing and an orange insulating housing, it provides a practical pluggable electrical interface for industrial automation, control equipment and electronic assemblies.
Designed for the 2.5 mm² conductor connection class, the WAGO 231-704/026-000 enables secure conductor termination without conventional clamping screws. Its four-pole configuration allows four separate electrical circuits to be connected through a single detachable interface, helping simplify modular wiring and equipment servicing.
As part of WAGO's established Multi Connection System, this female connector is intended for use with appropriately matched male connector components. Its CAGE CLAMP® connection technology supports reliable electrical contact, while the pluggable design facilitates cable pre-assembly, installation and replacement of electronic equipment.
The WAGO 231-704/026-000 uses WAGO's CAGE CLAMP® spring pressure technology to secure conductors without relying on conventional clamping screws. The spring mechanism maintains contact force on properly installed conductors, helping provide consistent electrical connectivity during normal equipment operation.
Its 4-pole female connector design enables four separate electrical circuits to be connected through a detachable interface. This arrangement is useful in industrial equipment requiring organised wiring, modular electronic assemblies and straightforward replacement of connected components.
The 7.62 mm contact pitch forms part of the connector's mechanical mating specification. Compatible male connectors must be selected according to WAGO's product documentation, including the correct contact arrangement, coding and electrical ratings. As with other pluggable connectors without breaking capacity, the assembly must not be connected or disconnected while live or under load.
Tick the specs you need, then view products that match.
| Current | 16 A | |
|---|---|---|
| Voltage | 630 V | |
| Product Series | WAGO 231 | |
| Rated surge voltage | 6 kV | |
| Number of plug-in contact rows | 1 | |
| Connectable cable type | Tubular cable | |
| Flammability class of insulation material according to UL 94 | V0 | |
| Operating temperature | -60 – 85 °C | |
| Rated current In | 16 A | |
| Connectable conductor cross section fine-strand without cable end sleeve | 0.08 – 2.5 mm² | |
| Degree of protection (IP), mounted | IP20 | |
| Material insulation body | Thermoplastic | |
| Coating housing | Uncoated | |
| Connectable conductor cross section multi-wired | 0.08 – 2.5 mm² | |
| Housing colour | Orange | |
| Modular spacing contacts | 7.62 mm | |
| Angle contact/conductor connection | 180° (horizontal) | |
| Contact type | Bus | |
| Material contact | Other copper alloys | |
| Type of electric connection | Spring clamp connection | |
| Housing material | Plastic | |
| Type of connection | Printed circuit board to cable | |
| Connectable conductor cross section fine-strand with cable end sleeve | 0.25 – 1.5 mm² | |
| Modular spacing connections | 7.62 mm | |
| Number of poles | 4 | |
| Material of contact surface | Tin | |
| Rated voltage | 630 V | |
| Pollution degree | 2 | |
| Connectable conductor cross section solid-core | 0.08 – 2.5 mm² | |
| Overvoltage category | III | |
| Manufacturer | WAGO | |
| Manufacturer part number | 231-704/026-000 | |
| Series | 231 Series | |
| Product family | MCS MIDI Classic | |
| Product designation | 1-conductor female connector | |
| Product type | Pluggable female connector | |
| Connector system | MCS – Multi Connection System | |
| Connector gender | Female | |
| Number of conductor connections | 4 | |
| Conductors per pole | 1 | |
| Nominal pin spacing | 7.62 mm | |
| Conductor connection class | 2.5 mm² | |
| Connection technology | CAGE CLAMP® | |
| Connection principle | Spring pressure connection | |
| Conductor actuation | Operating tool | |
| Connector arrangement | Single-row pluggable connection | |
| Mating interface | Compatible male connector | |
| Application | Industrial electrical interconnection | |
| Product category | Pluggable terminal block connectors |
The WAGO 231-704/026-000 is a 4-pole female pluggable connector designed for detachable electrical connections in industrial automation, control equipment and modular electronic assemblies.
The connector has 4 poles, providing four separate electrical connection positions with one conductor connection per pole.
The connector has a nominal 7.62 mm pin spacing and belongs to the WAGO MCS MIDI Classic 231 Series.
The WAGO 231-704/026-000 uses CAGE CLAMP® spring pressure technology, allowing conductors to be secured without conventional terminal clamping screws.
WAGO specifies the connector for the 2.5 mm² conductor connection class. The permitted conductor types and exact cross-section ranges should be checked against the manufacturer's technical documentation.
It is a female connector, intended to mate with an appropriately matched male connector from the compatible WAGO MCS MIDI Classic connection system.
No. Pluggable connectors without breaking capacity must not be connected or disconnected while live or under load. The relevant electrical circuit must be safely isolated before mating or unmating the connector.
The WAGO 231-704/026-000 combines a 4-pole female connector arrangement with 7.62 mm pin spacing and established CAGE CLAMP® spring pressure technology. As part of the MCS MIDI Classic system, it supports organised modular wiring, dependable conductor termination and practical electrical interconnection in industrial control equipment.
We use cookies
We use essential cookies to run this site, your basket and checkout. With your permission we'd also like to use analytics and advertising cookies to understand how the site is used and to measure our adverts.