Standard delivery
£8 ex VAT · free over £200UK parcel delivery is £8 ex VAT, or free on orders over £200 ex VAT.
Heavier items may be charged at a weight-based or pallet rate, shown at checkout.
£1.62
The WAGO 231-703/026-000 is a 3-pole female pluggable terminal block connector from the WAGO MCS MIDI Classic 231 Series. Designed for industrial automation, control cabinets, machinery and electrical equipment, this connector combines dependable CAGE CLAMP® spring pressure termination with a 7.62 mm contact pitch and an integrated locking latch.
With an IEC rated current of 16 A, support for copper conductors from 0.08–2.5 mm² and a screwless connection system, the WAGO 231-703/026-000 provides a practical solution for creating detachable three-circuit electrical connections.
The connector features an orange insulating housing, tin-plated copper alloy contacts, integrated test ports and coding fingers. Its CAGE CLAMP® terminals can be operated from vertical or horizontal directions, making conductor installation convenient during cable pre-assembly and equipment wiring.
The 231-703/026-000 is particularly suitable for applications requiring a compact female connector with a secure mating arrangement, including modular control equipment, industrial cable assemblies and compatible board-to-wire connections.
The WAGO 231-703/026-000 uses WAGO's established CAGE CLAMP® spring pressure termination system to provide secure conductor connections without conventional terminal screws.
During installation, an appropriate operating tool opens the spring clamp. The prepared conductor is inserted into the terminal opening, and releasing the operating tool allows the spring mechanism to maintain electrical contact pressure.
This technology is particularly useful in industrial equipment manufacturing, where consistent conductor termination and efficient assembly procedures are important.
The connector supports solid and fine-stranded copper conductors from 0.08–2.5 mm². Its three independent connection positions allow separate electrical circuits to be terminated within a single pluggable interface.
The ability to operate the CAGE CLAMP® connection from vertical and horizontal directions provides additional flexibility during cable preparation and installation.
The WAGO 231-703/026-000 features an integrated locking latch designed to help retain the connector when paired with a compatible mating component.
This is useful in industrial machinery, automation systems and electrical control equipment where detachable connections may be exposed to movement during normal equipment operation.
The locking arrangement should be used only with mating connectors designed for the corresponding WAGO connector system. Correct mechanical compatibility must be confirmed before installation.
The connector also includes coding fingers, which support suitable coding arrangements where multiple similar connectors are installed in the same equipment.
Another useful feature of the WAGO 231-703/026-000 is its integrated test ports.
These provide designated access points for electrical testing with appropriate equipment and procedures. They can be helpful during commissioning, fault diagnosis and maintenance of industrial electrical assemblies.
Testing must be carried out by competent personnel using suitable test probes and equipment. The presence of test ports does not remove the need to follow safe electrical working practices.
The WAGO 231-703/026-000 is a female pluggable connector intended to mate with a compatible male connector or header from the appropriate WAGO system.
The mating component must match the 3-pole configuration, 7.62 mm contact pitch, contact arrangement, locking mechanism and electrical ratings.
Compatible connection systems may include cable-to-cable and cable-to-PCB arrangements, depending on the selected mating component.
For example, the WAGO 231-733/001-000 is listed as a corresponding male connector in manufacturer documentation. Always verify the complete mating arrangement, including locking and coding requirements, before specifying components.
The WAGO 231-703/026-000 has an IEC rated current of 16 A. Its IEC voltage rating depends on the applicable overvoltage category and pollution degree:
These ratings must be considered alongside the selected mating connector, conductor size, environmental conditions and relevant electrical standards. The applicable rating for the complete assembly may be lower than the rating of an individual component.
WAGO MCS MIDI Classic connectors include connectors without breaking capacity under IEC/EN 61984. Consequently, the WAGO 231-703/026-000 must not be connected or disconnected while live or under load.
Always safely isolate the circuit before mating or unmating the connector. The circuit design must also prevent accessible male contacts from remaining energised when the connection is separated.
Tick the specs you need, then view products that match.
| Current | 16 A | |
|---|---|---|
| Voltage | 630 V | |
| Product Series | WAGO 231 | |
| Rated surge voltage | 6 kV | |
| Number of plug-in contact rows | 1 | |
| Connectable cable type | Tubular cable | |
| Flammability class of insulation material according to UL 94 | V0 | |
| Operating temperature | -60 – 85 °C | |
| Rated current In | 16 A | |
| Connectable conductor cross section fine-strand without cable end sleeve | 0.08 – 2.5 mm² | |
| Degree of protection (IP), mounted | IP20 | |
| Material insulation body | Thermoplastic | |
| Coating housing | Uncoated | |
| Connectable conductor cross section multi-wired | 0.08 – 2.5 mm² | |
| Housing colour | Orange | |
| Modular spacing contacts | 7.62 mm | |
| Angle contact/conductor connection | 180° (horizontal) | |
| Contact type | Bus | |
| Material contact | Other copper alloys | |
| Type of electric connection | Spring clamp connection | |
| Housing material | Plastic | |
| Type of connection | Printed circuit board to cable | |
| Connectable conductor cross section fine-strand with cable end sleeve | 0.25 – 1.5 mm² | |
| Modular spacing connections | 7.62 mm | |
| Number of poles | 3 | |
| Material of contact surface | Tin | |
| Rated voltage | 630 V | |
| Pollution degree | 2 | |
| Connectable conductor cross section solid-core | 0.08 – 2.5 mm² | |
| Overvoltage category | III | |
| Manufacturer | WAGO | |
| Manufacturer part number | 231-703/026-000 | |
| Series | 231 Series / MCS MIDI Classic | |
| Product type | Female pluggable terminal block connector | |
| Manufacturer description | 1-conductor female connector; CAGE CLAMP®; 2.5 mm²; 7.62 mm pin spacing; 3-pole; orange | |
| Connector gender | Female | |
| Number of connection positions | 3 | |
| Number of potentials | 3 | |
| Conductors per pole | 1 | |
| Number of levels | 1 | |
| Contact pitch | 7.62 mm | |
| Rated current (IEC) | 16 A | |
| Rated voltage (IEC, III/3) | 500 V | |
| Rated voltage (IEC, III/2) | 630 V | |
| Rated voltage (IEC, II/2) | 1000 V | |
| Rated impulse voltage (IEC) | 6 kV | |
| Rated current (UL) | 15 A under applicable approval conditions | |
| Rated voltage (UL) | 600 V under applicable approval conditions | |
| Connection technology | CAGE CLAMP® | |
| Termination method | Screwless spring pressure clamp | |
| Actuation method | Operating tool | |
| Clamp actuation directions | Vertical and horizontal | |
| Solid conductor cross-section | 0.08–2.5 mm² | |
| Fine-stranded conductor cross-section | 0.08–2.5 mm² | |
| Fine-stranded conductor with ferrule | Subject to ferrule type and manufacturer specifications | |
| Conductor size | 28–12 AWG | |
| Conductor stripping length | 8–9 mm | |
| Conductor entry orientation | 180° in-line | |
| Locking arrangement | Integrated locking latch | |
| Mounting arrangement | Pluggable connection with compatible mating component | |
| Width | 21.82 mm | |
| Height | 14.3 mm | |
| Depth | 26.45 mm | |
| Dimensions (W × H × D) | 21.82 × 14.3 × 26.45 mm | |
| Contact material | Copper alloy | |
| Contact plating | Tin | |
| Flammability classification | UL 94 V-0 | |
| Specified operating temperature range | −60 to +85 °C | |
| Approximate product weight | 6.262 g | |
| Manufacturer packaging unit | 100 pieces | |
| Country of origin | Germany | |
| GTIN / EAN | 4044918351539 |
The WAGO 231-703/026-000 is a 3-pole female pluggable connector used in industrial automation, control panels, machinery and modular electrical equipment. It features CAGE CLAMP® spring pressure termination, integrated test ports and a locking latch.
The connector has 3 poles, providing three independent conductor connection positions with a 7.62 mm contact pitch.
The connector has an IEC rated current of 16 A. A 15 A UL rating applies under specified approval conditions. The permitted current depends on the complete installation and mating connector.
The connector has IEC voltage ratings of 500 V under category III/3, 630 V under category III/2 and 1000 V under category II/2. The applicable voltage depends on the installation conditions.
The connector accepts solid and fine-stranded copper conductors from 0.08–2.5 mm² (28–12 AWG). The specified conductor stripping length is 8–9 mm.
No. The connector uses WAGO CAGE CLAMP® spring pressure technology, which secures conductors without conventional terminal screws. A suitable operating tool is used to open the spring clamp during conductor insertion and removal.
Yes. The connector includes an integrated locking latch designed to retain it in a compatible mating assembly. The corresponding male connector must support the appropriate locking arrangement.
Yes. The connector features integrated test ports for electrical inspection and testing using suitable equipment and safe working procedures.
The connector measures approximately 21.82 mm wide, 14.3 mm high and 26.45 mm deep. Confirm the latest manufacturer dimensional drawing when planning an installation.
No. WAGO MCS MIDI Classic connectors without breaking capacity must not be connected or disconnected while live or under load. The electrical circuit must be safely isolated before mating or unmating the connector.
The WAGO 231-703/026-000 combines a 3-pole female connection arrangement, 7.62 mm contact pitch, 16 A IEC rating, CAGE CLAMP® spring pressure technology and integrated locking and testing features in a practical connector for industrial control and modular electrical equipment.
Technical references: WAGO 231-703/026-000 Manufacturer Datasheet (PDF) and WAGO Product Reference. Confirm the latest manufacturer documentation, electrical ratings and mating compatibility before final specification.
We use cookies
We use essential cookies to run this site, your basket and checkout. With your permission we'd also like to use analytics and advertising cookies to understand how the site is used and to measure our adverts.