Standard delivery
£8 ex VAT · free over £200UK parcel delivery is £8 ex VAT, or free on orders over £200 ex VAT.
Heavier items may be charged at a weight-based or pallet rate, shown at checkout.
£1.62
The WAGO 231-703/008-000 is a compact and reliable 3-pole pluggable female terminal block connector with snap-in mounting feet, designed for secure electrical connections in industrial automation, control panels, lighting equipment and electronic control systems. As part of the established WAGO MCS MIDI Classic 231 Series, it incorporates proven CAGE CLAMP® spring pressure connection technology to provide dependable conductor termination without conventional terminal screws.
This connector combines efficient wiring technology with a practical snap-in mounting arrangement, making it suitable for modular electrical installations and industrial equipment. Its integrated mounting feet enable secure mechanical attachment to compatible mounting panels, while the spring clamp system maintains consistent contact pressure. The pluggable design also simplifies cable pre-assembly, installation, testing and equipment maintenance.
Featuring 3 connection poles, a 7.62 mm contact pitch and a rated current of 16 A under IEC specifications, the WAGO 231-703/008-000 provides a versatile solution for industrial power and control wiring. It accommodates solid and fine-stranded copper conductors from 0.08–2.5 mm² and features a durable orange polyamide housing, making it suitable for demanding industrial electrical applications.
The WAGO 231-703/008-000 uses WAGO's established CAGE CLAMP® spring pressure connection system to provide secure and consistent electrical contact. Unlike conventional screw terminal connections, the spring clamp mechanism applies continuous pressure to the conductor, helping maintain stable electrical performance and reducing the need for periodic terminal retightening.
Conductors are installed using a suitable operating tool to open the spring clamp. Once the prepared conductor has been inserted and the tool removed, the spring mechanism securely retains the wire. The connector supports both parallel and perpendicular tool actuation, providing installation flexibility when wiring inside electrical cabinets or compact equipment assemblies.
The 3-pole configuration enables three independent electrical connections through a single detachable assembly. Its 7.62 mm contact spacing supports compatibility with appropriately specified mating connectors from the WAGO MCS MIDI Classic system, making it suitable for modular power distribution, signal wiring and industrial control applications.
A key feature of the 231-703/008-000 is its integrated snap-in mounting feet. These provide a convenient method of mechanically securing the connector to a suitable panel without requiring separate screw-mounted brackets. The snap-in arrangement is designed for compatible mounting panels with a thickness of 0.6–1.2 mm, helping simplify installation and improve connector positioning within electrical assemblies.
The connector also incorporates integrated test ports and coding fingers. Test access supports commissioning, fault diagnosis and electrical inspection, while coding features allow organised connector arrangements when used with compatible mating components. Tin-plated copper alloy contacts provide dependable conductivity, and the orange polyamide housing offers durable electrical insulation and mechanical protection.
For safe operation, the WAGO 231-703/008-000 should only be connected or disconnected when the relevant electrical circuit is de-energised and not under load. The connector is intended for use with compatible mating components and within the applicable electrical ratings and environmental conditions.
Tick the specs you need, then view products that match.
| Current | 16 A | |
|---|---|---|
| Voltage | 630 V | |
| Product Series | WAGO 231 | |
| Rated surge voltage | 6 kV | |
| Number of plug-in contact rows | 1 | |
| Connectable cable type | Tubular cable | |
| Flammability class of insulation material according to UL 94 | V0 | |
| Operating temperature | -60 – 85 °C | |
| Rated current In | 16 A | |
| Connectable conductor cross section fine-strand without cable end sleeve | 0.08 – 2.5 mm² | |
| Degree of protection (IP), mounted | IP20 | |
| Material insulation body | Thermoplastic | |
| Coating housing | Uncoated | |
| Connectable conductor cross section multi-wired | 0.08 – 2.5 mm² | |
| Housing colour | Orange | |
| Modular spacing contacts | 7.62 mm | |
| Angle contact/conductor connection | 180° (horizontal) | |
| Contact type | Bus | |
| Material contact | Other copper alloys | |
| Type of electric connection | Spring clamp connection | |
| Housing material | Plastic | |
| Type of connection | Printed circuit board to cable | |
| Connectable conductor cross section fine-strand with cable end sleeve | 0.25 – 1.5 mm² | |
| Modular spacing connections | 7.62 mm | |
| Number of poles | 3 | |
| Material of contact surface | Tin | |
| Rated voltage | 630 V | |
| Pollution degree | 2 | |
| Connectable conductor cross section solid-core | 0.08 – 2.5 mm² | |
| Overvoltage category | III | |
| Manufacturer | WAGO | |
| Series | MCS MIDI Classic 231 Series | |
| Model | 231-703/008-000 | |
| Product type | Pluggable female terminal block connector with snap-in mounting feet | |
| Connector gender | Female | |
| Number of connection points | 3 | |
| Number of connection levels | 1 | |
| Number of conductors per connection | 1 | |
| Connection technology | CAGE CLAMP® spring pressure connection | |
| Termination type | Screwless spring clamp | |
| Actuation method | Operating tool | |
| Actuation directions | Parallel and perpendicular to conductor entry | |
| Pin spacing | 7.62 mm | |
| Rated current (IEC) | 16 A | |
| Rated voltage (IEC, III/3) | 500 V | |
| Rated voltage (IEC, III/2) | 630 V | |
| Rated impulse voltage (IEC, III/3) | 6 kV | |
| Rated voltage (UL) | 600 V | |
| Rated current (UL) | 15 A | |
| Solid conductor cross-section | 0.08–2.5 mm² | |
| Fine-stranded conductor cross-section | 0.08–2.5 mm² | |
| Conductor size (AWG) | 28–12 AWG | |
| Fine-stranded conductor with insulated ferrule | 0.25–1.5 mm² | |
| Fine-stranded conductor with uninsulated ferrule | 0.25–2.5 mm² | |
| Wire stripping length | 8–9 mm | |
| Conductor entry direction | 0° relative to mating direction | |
| Mounting type | Snap-in mounting feet | |
| Compatible mounting panel thickness | 0.6–1.2 mm | |
| Snap-in mounting hole diameter | 3.5 mm (+0.1 mm tolerance) | |
| Anti-rotation protection | Yes | |
| Plug-in locking mechanism | None | |
| Variable coding | Yes | |
| Integrated test ports | Yes | |
| Contact material | Copper alloy | |
| Contact plating | Tin | |
| Clamping spring material | Chrome-nickel spring steel | |
| Colour | Orange | |
| Flammability rating | UL 94 V-0 | |
| Operating temperature range | −60 to +85 °C | |
| Processing temperature range | −35 to +60 °C | |
| Dimensions (W × H × D) | 21.82 × 14.3 × 26.45 mm | |
| Weight | approx. 6.4 g | |
| Country of origin | Germany | |
| Applicable standards and approvals | IEC/EN 60664-1, UL 1059, UL 1977 and CSA |
The WAGO 231-703/008-000 is a 3-pole pluggable female terminal block connector designed for secure electrical connections in industrial automation, control panels, lighting systems and electronic equipment. Its integrated snap-in mounting feet allow convenient installation in compatible mounting panels.
The connector features 3 individual connection poles arranged at a 7.62 mm pitch. Each pole provides an independent electrical connection, allowing three circuits or conductors to be connected through one compact pluggable assembly.
The connector accepts solid and fine-stranded copper conductors from 0.08–2.5 mm², equivalent to approximately 28–12 AWG. Fine-stranded conductors with insulated ferrules are supported from 0.25–1.5 mm², while uninsulated ferrules are supported from 0.25–2.5 mm². The recommended stripping length is 8–9 mm.
The WAGO 231-703/008-000 has an IEC rated current of 16 A. Its rated voltage is 500 V under IEC overvoltage category III, pollution degree 3 conditions, or 630 V under category III, pollution degree 2 conditions. Under applicable UL specifications, the connector is rated at 600 V and 15 A. The appropriate rating depends on the installation conditions and relevant standards.
The connector uses integrated snap-in mounting feet designed for compatible panels with a thickness of 0.6–1.2 mm. Conductors are connected using CAGE CLAMP® spring pressure technology, which requires a suitable operating tool rather than conventional terminal screws. The connector also provides integrated test ports and coding fingers for installation and maintenance.
WAGO MCS MIDI Classic connectors are widely used in industrial automation and electrical control applications where secure, efficient and maintenance-friendly connections are essential. The WAGO 231-703/008-000 combines proven CAGE CLAMP® technology, a compact 3-pole configuration and convenient snap-in mounting feet to deliver reliable electrical interconnections for modern industrial equipment.
We use cookies
We use essential cookies to run this site, your basket and checkout. With your permission we'd also like to use analytics and advertising cookies to understand how the site is used and to measure our adverts.