Standard delivery
£8 ex VAT · free over £200UK parcel delivery is £8 ex VAT, or free on orders over £200 ex VAT.
Heavier items may be charged at a weight-based or pallet rate, shown at checkout.
£1.13
The WAGO 231-702/026-000 is a 2-pole female pluggable connector from the WAGO 231 Series MCS MIDI Classic range, designed for reliable electrical connections in industrial automation, control panels and electronic equipment. Featuring 7.62 mm pin spacing and WAGO's proven CAGE CLAMP® spring pressure connection technology, it provides secure conductor termination and convenient detachable connections.
Designed for copper conductors from 0.08 to 2.5 mm² (28–12 AWG), the connector accommodates solid and fine-stranded wires without conventional terminal clamping screws. Its 16 A IEC rated current and voltage ratings of up to 1000 V under specified IEC installation conditions make it suitable for a broad range of industrial electrical applications.
The WAGO 231-702/026-000 features an orange polyamide insulating housing, tin-plated copper alloy contacts, integrated test ports and coding fingers. Its compact, free-hanging construction supports cable pre-assembly and modular equipment wiring, while tool-operated CAGE CLAMP® connections help streamline installation and maintenance.
The WAGO 231-702/026-000 uses WAGO's CAGE CLAMP® spring pressure technology to provide consistent electrical contact with properly prepared conductors. Unlike conventional screw-clamp terminals, the spring mechanism maintains conductor contact pressure without requiring periodic screw retightening, making it particularly suitable for industrial equipment exposed to normal vibration and temperature variation.
Its 2-pole female connector arrangement provides a detachable interface for two independent circuits. The integrated test ports facilitate diagnostic access, while coding fingers support connector identification and help accommodate coding arrangements within compatible MCS MIDI Classic assemblies.
The connector is designed for efficient cable pre-assembly and on-unit wiring, with vertical and horizontal CAGE CLAMP® actuation options. Its tin-plated copper alloy contacts, orange flame-retardant housing and compact construction make it a practical solution for modular industrial electrical systems. As an MCS connector without breaking capacity, it must not be connected or disconnected while live or under load.
Tick the specs you need, then view products that match.
| Current | 16 A | |
|---|---|---|
| Voltage | 630 V | |
| Product Series | WAGO 231 | |
| Rated surge voltage | 6 kV | |
| Number of plug-in contact rows | 1 | |
| Connectable cable type | Tubular cable | |
| Flammability class of insulation material according to UL 94 | V0 | |
| Operating temperature | -60 – 85 °C | |
| Rated current In | 16 A | |
| Connectable conductor cross section fine-strand without cable end sleeve | 0.08 – 2.5 mm² | |
| Degree of protection (IP), mounted | IP20 | |
| Material insulation body | Thermoplastic | |
| Coating housing | Uncoated | |
| Connectable conductor cross section multi-wired | 0.08 – 2.5 mm² | |
| Housing colour | Orange | |
| Modular spacing contacts | 7.62 mm | |
| Angle contact/conductor connection | 180° (horizontal) | |
| Contact type | Bus | |
| Material contact | Other copper alloys | |
| Type of electric connection | Spring clamp connection | |
| Housing material | Plastic | |
| Type of connection | Printed circuit board to cable | |
| Connectable conductor cross section fine-strand with cable end sleeve | 0.25 – 1.5 mm² | |
| Modular spacing connections | 7.62 mm | |
| Number of poles | 2 | |
| Material of contact surface | Tin | |
| Rated voltage | 630 V | |
| Pollution degree | 2 | |
| Connectable conductor cross section solid-core | 0.08 – 2.5 mm² | |
| Overvoltage category | III | |
| Manufacturer | WAGO | |
| Manufacturer part number | 231-702/026-000 | |
| Series | 231 – MCS MIDI Classic | |
| Product type | 1-conductor female connector, 2-pole | |
| Connector system | MCS – Multi Connection System | |
| Connector gender | Female / socket | |
| Connection points | 2 | |
| Electrical potentials | 2 | |
| Number of levels | 1 | |
| Pin spacing | 7.62 mm | |
| Connection technology | CAGE CLAMP® | |
| Actuation type | Operating tool | |
| Rated current (IEC) | 16 A | |
| Rated voltage (IEC, III/3) | 500 V | |
| Rated voltage (IEC, III/2) | 630 V | |
| Rated voltage (IEC, II/2) | 1000 V | |
| Rated impulse voltage (IEC) | 6 kV | |
| Rated voltage (UL 1977) | 600 V | |
| Rated current (UL 1977) | 15 A | |
| Rated voltage (UL 1059, Use Group B) | 300 V | |
| Rated current (UL 1059, Use Group B) | 15 A | |
| Solid conductor cross-section | 0.08–2.5 mm² | |
| Fine-stranded conductor cross-section | 0.08–2.5 mm² | |
| Conductor size | 28–12 AWG | |
| Conductor stripping length | 8–9 mm | |
| Mounting type | Free-hanging / in-line | |
| Connector locking | No integrated locking mechanism | |
| Coding | Variable coding supported | |
| Test ports | Integrated | |
| Contact material | Copper alloy | |
| Contact plating | Tin | |
| Clamping spring material | Chrome-nickel spring steel | |
| Flammability classification | UL 94 V-0 | |
| Temperature limit range | −60 to +85 °C | |
| Width | 14.2 mm | |
| Height | 14.3 mm | |
| Depth | 26.45 mm | |
| Approximate weight | 4.2 g | |
| EAN | 4044918351416 |
The WAGO 231-702/026-000 is a 2-pole female pluggable connector designed for detachable electrical connections in industrial automation, electronic control equipment and modular wiring assemblies.
The connector has a 7.62 mm pin spacing and belongs to the WAGO MCS MIDI Classic 231 Series. Compatible mating connectors must have the correct mechanical and electrical configuration.
The WAGO 231-702/026-000 accepts solid and fine-stranded copper conductors from 0.08 to 2.5 mm² (28–12 AWG). The specified conductor stripping length is 8–9 mm.
The connector has an IEC rated current of 16 A. Its IEC rated voltage is 500 V under category III/3, 630 V under category III/2 and 1000 V under category II/2 conditions. The applicable rating depends on the installation environment and relevant standards.
No. It uses WAGO CAGE CLAMP® spring pressure technology, which secures conductors without conventional clamping screws. An appropriate operating tool is used to actuate the spring clamp during conductor insertion or removal.
Yes. The WAGO 231-702/026-000 includes integrated test ports and coding fingers. These features support electrical testing and connector coding arrangements when used with suitable accessories and compatible components.
No. The WAGO MCS MIDI Classic system includes connectors without breaking capacity under IEC/EN 61984. The connector must not be connected or disconnected while live or under load, and accessible contacts must be protected against hazardous energisation.
The WAGO 231-702/026-000 combines dependable CAGE CLAMP® spring pressure termination with a compact 2-pole female connector design, 7.62 mm pitch and integrated testing features. As part of the MCS MIDI Classic system, it supports efficient cable assembly, reliable electrical connections and maintainable industrial control installations.
We use cookies
We use essential cookies to run this site, your basket and checkout. With your permission we'd also like to use analytics and advertising cookies to understand how the site is used and to measure our adverts.