Standard delivery
£8 ex VAT · free over £200UK parcel delivery is £8 ex VAT, or free on orders over £200 ex VAT.
Heavier items may be charged at a weight-based or pallet rate, shown at checkout.
£9.78
The WAGO 231-654 is a 24-pole male pluggable terminal block connector from the WAGO MCS MIDI Classic 231 Series. Designed for industrial automation, control cabinets, machinery and modular electrical equipment, it combines WAGO's established CAGE CLAMP® spring pressure connection technology with a practical free-hanging connector design.
Featuring a 5.08 mm contact pitch, an IEC rated current of 12 A and compatibility with copper conductors from 0.08–2.5 mm², the WAGO 231-654 provides twenty-four independent electrical connection positions in a single-level arrangement. Its screwless spring pressure termination system allows conductors to be connected securely without conventional terminal screws.
The standard WAGO 231-654 has a free-hanging, in-line configuration, making it suitable for detachable cable assemblies and modular equipment connections. Its orange polyamide insulating housing, tin-plated copper contacts and tool-operated spring clamps provide a dependable connection solution for professional industrial wiring applications.
The WAGO 231-654 uses WAGO's established CAGE CLAMP® spring pressure connection system to provide reliable conductor termination without conventional terminal screws.
During installation, a suitable operating tool opens the spring clamp, allowing the prepared conductor to be inserted. Releasing the clamp secures the conductor through spring pressure, maintaining electrical contact without requiring a terminal screw to be tightened.
This technology is particularly useful in industrial control systems and machinery where efficient wiring procedures and consistent conductor termination are important.
The connector accepts solid and fine-stranded copper conductors from 0.08–2.5 mm². Fine-stranded conductors fitted with suitable ferrules can also be used within the specified ferrule cross-section ranges.
With 24 independent connection positions, the connector enables multiple circuits to be grouped within one detachable electrical interface, helping organise wiring and reduce the need for numerous separate connector assemblies.
The standard WAGO 231-654 has a free-hanging, in-line connector configuration, making it suitable for modular cable assemblies and detachable electrical equipment connections.
Its 180° conductor entry allows the connected conductors to follow a straightforward cable routing direction. This arrangement is useful in control cabinets, industrial machinery and OEM electrical assemblies where organised wiring is essential.
Appropriate cable support and strain relief should be provided according to the installation requirements. The connector should not be used as the sole means of supporting heavy cable bundles or equipment loads.
For installations requiring mechanical attachment to a panel or mounting rail, alternative WAGO 231-654 variants are available with dedicated mounting features.
The WAGO 231-654 belongs to a connector family offering several mechanical configurations. Selecting the correct manufacturer part number is important because different variants may have different mounting dimensions and installation requirements.
Although these variants share the same connector family and pole count, their mechanical arrangements differ. Always check the exact ordering code and WAGO dimensional drawing before selecting a replacement or preparing mounting features.
The WAGO 231-654 is a male pluggable connector designed for use with a compatible female mating component.
The mating connector must match the 24-pole configuration, 5.08 mm contact pitch, mechanical profile and electrical ratings. Any applicable connector coding requirements should also be considered to help prevent incorrect connections.
When correctly specified, a pluggable connector system can simplify equipment assembly, maintenance and replacement by allowing electrical interfaces to be separated after the circuit has been safely isolated.
WAGO MCS MIDI Classic connectors can be used in wire-to-wire and board-to-wire connection systems when combined with suitable mating components.
The WAGO 231-654 has an IEC rated current of 12 A. Its rated voltage depends on the applicable insulation coordination conditions:
Under UL 1977, the connector has ratings of 600 V and 15 A. Different values apply under specific UL 1059 use groups, so the applicable approval conditions must be considered during electrical design.
WAGO MCS MIDI Classic connectors include products without breaking capacity under IEC/EN 61984. Consequently, the WAGO 231-654 must not be connected or disconnected while live or under load.
Always safely isolate the electrical circuit before mating or unmating the connector. The circuit design should also ensure that accessible male contacts cannot remain energised when the connector is disconnected.
Tick the specs you need, then view products that match.
| Current | 12 A | |
|---|---|---|
| Voltage | 320 V | |
| Product Series | WAGO 231 | |
| Rated surge voltage | 4 kV | |
| Number of plug-in contact rows | 1 | |
| Connectable cable type | Tubular cable | |
| Flammability class of insulation material according to UL 94 | V0 | |
| Operating temperature | -60 – 100 °C | |
| Rated current In | 12 A | |
| Connectable conductor cross section fine-strand without cable end sleeve | 0.08 – 2.5 mm² | |
| Degree of protection (IP), mounted | IP10 | |
| Material insulation body | Thermoplastic | |
| Coating housing | Uncoated | |
| Connectable conductor cross section multi-wired | 0.08 – 2.5 mm² | |
| Housing colour | Orange | |
| Modular spacing contacts | 5.08 mm | |
| Angle contact/conductor connection | 180° (horizontal) | |
| Contact type | Pin | |
| Material contact | Other copper alloys | |
| Type of electric connection | Spring clamp connection | |
| Housing material | Plastic | |
| Type of connection | Printed circuit board to cable | |
| Connectable conductor cross section fine-strand with cable end sleeve | 0.25 – 1.5 mm² | |
| Modular spacing connections | 5.08 mm | |
| Number of poles | 24 | |
| Material of contact surface | Tin | |
| Rated voltage | 320 V | |
| Pollution degree | 2 | |
| Connectable conductor cross section solid-core | 0.08 – 2.5 mm² | |
| Overvoltage category | III | |
| Manufacturer | WAGO | |
| Manufacturer part number | 231-654 | |
| Series | 231 Series / MCS MIDI Classic | |
| Product type | Male pluggable terminal block connector | |
| Manufacturer description | 1-conductor male connector; CAGE CLAMP®; 2.5 mm²; 5.08 mm pitch; 24-pole; orange | |
| Connector gender | Male | |
| Number of connection positions | 24 | |
| Number of potentials | 24 | |
| Number of levels | 1 | |
| Contact pitch | 5.08 mm | |
| Rated current (IEC) | 12 A | |
| Rated voltage (IEC, III/3) | 320 V | |
| Rated voltage (IEC, III/2) | 320 V | |
| Rated voltage (IEC, II/2) | 630 V | |
| Rated impulse voltage (IEC) | 4 kV | |
| Rated current (UL 1977) | 15 A | |
| Rated voltage (UL 1977) | 600 V | |
| UL 1059 Use Group B | 300 V / 15 A | |
| UL 1059 Use Group D | 300 V / 10 A | |
| Connection technology | CAGE CLAMP® | |
| Termination method | Screwless spring pressure clamp | |
| Actuation method | Operating tool | |
| Solid conductor cross-section | 0.08–2.5 mm² | |
| Fine-stranded conductor cross-section | 0.08–2.5 mm² | |
| Fine-stranded conductor with insulated ferrule | 0.25–1.5 mm² | |
| Fine-stranded conductor with uninsulated ferrule | 0.25–2.5 mm² | |
| Conductor size | 28–12 AWG | |
| Conductor stripping length | 8–9 mm | |
| Conductor entry orientation | 180° in-line | |
| Mounting type | Free-hanging / in-line | |
| Connector arrangement | Male plug for compatible female mating components | |
| Connection applications | Wire-to-wire and board-to-wire | |
| Width | 125.12 mm | |
| Height | 14.3 mm | |
| Depth | 27.5 mm | |
| Dimensions (W × H × D) | 125.12 × 14.3 × 27.5 mm | |
| Contact material | Electrolytic copper | |
| Contact plating | Tin | |
| Material flammability classification | UL 94 V-0 | |
| Specified temperature range | −60 to +100 °C | |
| Relevant standards | IEC/EN 61984, IEC/EN 60664-1, UL 1059 and UL 1977 |
The WAGO 231-654 is a 24-pole male pluggable connector designed for modular electrical connections in industrial automation, control panels and machinery. It features CAGE CLAMP® spring pressure termination and a free-hanging, in-line configuration.
The connector has 24 poles, providing twenty-four independent electrical connection positions with a 5.08 mm contact pitch.
The connector has an IEC rated current of 12 A. Under UL 1977, the current rating is 15 A. The applicable rating depends on the approval standard and complete installation.
The connector is rated at 320 V under IEC overvoltage category III and 630 V under IEC overvoltage category II, pollution degree 2. A 600 V rating applies under UL 1977.
The connector accepts solid and fine-stranded copper conductors from 0.08–2.5 mm² (28–12 AWG). The specified conductor stripping length is 8–9 mm.
No. The connector uses WAGO CAGE CLAMP® spring pressure technology, which secures conductors without conventional terminal screws. A suitable operating tool is used during conductor insertion and removal.
The standard WAGO 231-654 has a free-hanging, in-line configuration. Alternative variants are available with snap-in mounting feet, mounting flanges and snap-in flange arrangements.
Both are 24-pole male connectors from the WAGO 231 Series with a 5.08 mm pitch and CAGE CLAMP® termination. The standard 231-654 has a free-hanging configuration, while the 231-654/019-000 includes a mounting flange and clamping collar for mechanically supported installations.
The standard connector measures approximately 125.12 mm wide, 14.3 mm high and 27.5 mm deep. Dimensions differ between mounting variants, so the correct part number should be checked before preparing an installation.
No. WAGO MCS MIDI Classic connectors without breaking capacity must not be connected or disconnected while live or under load. The electrical circuit must be safely isolated before mating or unmating the connector.
WAGO MCS MIDI Classic connectors provide electrical engineers, automation specialists and OEM machine builders with dependable CAGE CLAMP® spring pressure technology and modular electrical connection options for industrial control systems, machinery and equipment manufacturing.
Technical reference: WAGO 231-654 manufacturer datasheet. Confirm the latest manufacturer documentation, electrical ratings and compatible mating components before final specification.
We use cookies
We use essential cookies to run this site, your basket and checkout. With your permission we'd also like to use analytics and advertising cookies to understand how the site is used and to measure our adverts.