Standard delivery
£8 ex VAT · free over £200UK parcel delivery is £8 ex VAT, or free on orders over £200 ex VAT.
Heavier items may be charged at a weight-based or pallet rate, shown at checkout.
£8.52
The WAGO 231-651 is a 21-pole male pluggable connector from the WAGO MCS MIDI Classic 231 Series, designed for reliable electrical connections in industrial automation, control panels, machinery and electronic equipment. Featuring WAGO's established CAGE CLAMP® spring pressure connection technology, it provides secure, screwless conductor termination in a compact modular connector system.
With a 5.08 mm contact pitch, 12 A IEC rated current and compatibility with copper conductors from 0.08–2.5 mm², the WAGO 231-651 accommodates twenty-one independent electrical connections in a single-level arrangement. Its 180° in-line conductor entry and free-hanging configuration make it particularly suitable for detachable cable assemblies and equipment interconnections.
The connector combines an orange polyamide 66 insulating housing with tin-plated electrolytic copper contacts and spring pressure conductor clamps. When paired with a compatible female connector, it provides a practical solution for wire-to-wire and board-to-wire electrical interfaces where dependable contact, modular assembly and convenient servicing are important.
The WAGO 231-651 uses WAGO's proven CAGE CLAMP® spring pressure termination system to establish dependable electrical connections without conventional terminal screws. During installation, an appropriate operating tool opens the spring clamp, allowing the prepared conductor to be inserted. Releasing the clamp secures the conductor through spring pressure.
This connection technology supports efficient installation and consistent electrical contact. Unlike conventional screw terminals, the conductor connection does not depend on applying a specified screw-tightening torque, making the connector well suited to repeatable industrial cable assembly procedures.
With 21 independent connection positions, the connector enables multiple electrical circuits to be grouped within a single pluggable interface. This can simplify cable organisation, reduce the number of separate connector assemblies and support modular wiring arrangements in machinery and control systems.
The standard WAGO 231-651 has a free-hanging, in-line configuration, making it suitable for electrical connections between compatible cable assemblies and equipment interfaces.
Its 180° conductor entry provides a straightforward cable exit direction, helping installers organise wiring within control cabinets and machinery. Appropriate cable support and strain relief should be provided according to the installation requirements.
The connector is intended to mate with a compatible 21-pole female connector. The mating component must match the 5.08 mm pitch, mechanical profile, contact arrangement, coding configuration and electrical ratings.
Alternative WAGO variants offer different mounting arrangements. For example, 231-651/018-000 features snap-in mounting feet, while 231-651/019-000 incorporates a mounting flange. These are separate manufacturer ordering codes and should not be treated as mechanically identical to the standard 231-651.
The WAGO 231-651 has an IEC rated current of 12 A and an IEC rated voltage of 630 V under overvoltage category II, pollution degree 2. Under applicable UL approval conditions, the connector is specified at 15 A and 600 V.
Actual permissible operating ratings depend on the conductor size, mating connector, environmental conditions and applicable electrical standards. The complete connection system must be selected according to the installation's electrical and mechanical requirements.
WAGO MCS MIDI Classic connectors are used in systems that include connectors without breaking capacity under IEC/EN 61984. They must therefore not be connected or disconnected while live or under load. Always safely isolate the electrical circuit before mating or unmating the connector, and ensure that exposed male contacts cannot remain energised when disconnected.
Tick the specs you need, then view products that match.
| Current | 12 A | |
|---|---|---|
| Voltage | 320 V | |
| Product Series | WAGO 231 | |
| Rated surge voltage | 4 kV | |
| Number of plug-in contact rows | 1 | |
| Connectable cable type | Tubular cable | |
| Flammability class of insulation material according to UL 94 | V0 | |
| Operating temperature | -60 – 100 °C | |
| Rated current In | 12 A | |
| Connectable conductor cross section fine-strand without cable end sleeve | 0.08 – 2.5 mm² | |
| Degree of protection (IP), mounted | IP10 | |
| Material insulation body | Thermoplastic | |
| Coating housing | Uncoated | |
| Connectable conductor cross section multi-wired | 0.08 – 2.5 mm² | |
| Housing colour | Orange | |
| Modular spacing contacts | 5.08 mm | |
| Angle contact/conductor connection | 180° (horizontal) | |
| Contact type | Pin | |
| Material contact | Other copper alloys | |
| Type of electric connection | Spring clamp connection | |
| Housing material | Plastic | |
| Type of connection | Printed circuit board to cable | |
| Connectable conductor cross section fine-strand with cable end sleeve | 0.25 – 1.5 mm² | |
| Modular spacing connections | 5.08 mm | |
| Number of poles | 21 | |
| Material of contact surface | Tin | |
| Rated voltage | 320 V | |
| Pollution degree | 2 | |
| Connectable conductor cross section solid-core | 0.08 – 2.5 mm² | |
| Overvoltage category | III | |
| Manufacturer | WAGO | |
| Manufacturer part number | 231-651 | |
| Series | 231 Series / MCS MIDI Classic | |
| Product type | Male pluggable terminal block connector | |
| Manufacturer description | 1-conductor male connector; CAGE CLAMP®; 2.5 mm²; 5.08 mm pitch; 21-pole; orange | |
| Connector gender | Male | |
| Number of connection positions | 21 | |
| Number of levels | 1 | |
| Contact pitch | 5.08 mm | |
| Rated current (IEC) | 12 A | |
| Rated voltage (IEC, II/2) | 630 V | |
| Rated current (UL) | 15 A, subject to applicable approval conditions | |
| Rated voltage (UL) | 600 V, subject to applicable approval conditions | |
| Connection technology | CAGE CLAMP® | |
| Termination method | Screwless spring pressure clamp | |
| Actuation method | Operating tool | |
| Solid conductor cross-section | 0.08–2.5 mm² | |
| Fine-stranded conductor cross-section | 0.08–2.5 mm² | |
| Conductor size | 28–12 AWG | |
| Conductor stripping length | 8–9 mm | |
| Conductor entry orientation | 180° in-line | |
| Mounting type | Free-hanging / in-line | |
| Connector arrangement | Pluggable male connector for compatible female mating components | |
| Connection applications | Wire-to-wire and board-to-wire | |
| Insulation height | 14.3 mm | |
| Contact material | Electrolytic copper | |
| Contact plating | Tin | |
| Flammability classification | UL 94 V-0 | |
| Specified temperature range | −60 to +100 °C |
The WAGO 231-651 is a 21-pole male pluggable connector designed for modular electrical connections in industrial automation, control panels and machinery. It features CAGE CLAMP® spring pressure termination and a free-hanging, in-line configuration.
The connector has 21 poles, providing twenty-one independent electrical connection positions with a 5.08 mm contact pitch.
The connector has an IEC rated current of 12 A and a UL rated current of 15 A under applicable approval conditions. The permitted operating current depends on the complete installation and mating connector.
The connector has an IEC rated voltage of 630 V under overvoltage category II, pollution degree 2. A 600 V UL rating applies under the relevant approval conditions.
The connector accepts solid and fine-stranded copper conductors from 0.08–2.5 mm² (28–12 AWG). The recommended conductor stripping length is 8–9 mm.
No. The connector uses WAGO CAGE CLAMP® spring pressure technology, which secures conductors without conventional terminal screws. A suitable operating tool is used to open the spring clamp during conductor insertion and removal.
The standard WAGO 231-651 has a free-hanging, in-line configuration. Separate variants are available with snap-in mounting feet or mounting flanges for applications requiring mechanical attachment.
Both are 21-pole male connectors from the WAGO 231 Series with a 5.08 mm pitch and CAGE CLAMP® termination. The standard 231-651 has a free-hanging configuration, while the 231-651/019-000 features a mounting flange for compatible panel installations.
The connector features an orange polyamide 66 insulating housing and tin-plated electrolytic copper contacts. The housing material has a UL 94 V-0 flammability classification.
No. WAGO MCS MIDI Classic connectors without breaking capacity must not be connected or disconnected while live or under load. The electrical circuit must be safely isolated before mating or unmating the connector.
WAGO MCS MIDI Classic connectors provide electrical engineers, automation specialists and OEM machine builders with dependable CAGE CLAMP® spring pressure technology and modular connection options for industrial control systems, machinery and electrical equipment.
Manufacturer product reference: WAGO 231-651 product information. Confirm the latest manufacturer documentation and compatible mating components before final specification.
We use cookies
We use essential cookies to run this site, your basket and checkout. With your permission we'd also like to use analytics and advertising cookies to understand how the site is used and to measure our adverts.