Standard delivery
£8 ex VAT · free over £200UK parcel delivery is £8 ex VAT, or free on orders over £200 ex VAT.
Heavier items may be charged at a weight-based or pallet rate, shown at checkout.
£8.80
The WAGO 231-651/018-000 is a 21-pole male pluggable connector with snap-in mounting feet, designed for industrial automation, electrical control panels, machinery and modular electrical installations. Part of the WAGO MCS MIDI Classic 231 Series, it combines dependable CAGE CLAMP® spring pressure connection technology with a practical mounting arrangement for DIN-35 rail and panel applications.
Featuring a 5.08 mm contact pitch, 12 A IEC rated current and conductor compatibility from 0.08–2.5 mm², the connector provides twenty-one independent electrical connection positions in a compact, single-level design. Its screwless spring clamp system enables secure conductor termination without conventional terminal screws.
The distinguishing feature of the 231-651/018-000 is its integrated snap-in mounting feet, which support panel mounting and installation on DIN-35 rails using the appropriate mounting adapter. This makes the connector particularly useful for organised control cabinet wiring, modular machinery and equipment connections requiring additional mechanical support.
Manufactured with an orange polyamide 66 insulating housing and tin-plated electrolytic copper contacts, the WAGO 231-651/018-000 provides a practical solution for professional industrial electrical installations.
The WAGO 231-651/018-000 uses WAGO's established CAGE CLAMP® spring pressure connection system to provide dependable conductor termination without conventional terminal screws.
During installation, a suitable operating tool opens the spring clamp, allowing the prepared conductor to be inserted. When the clamp is released, the spring mechanism maintains contact pressure on the conductor, creating a secure electrical connection.
This technology is particularly useful in industrial control panels and machinery, where consistent electrical contact and efficient assembly procedures are important. Spring pressure connections eliminate the need to apply a specified tightening torque to individual conductor terminals.
The connector accommodates solid and fine-stranded copper conductors from 0.08–2.5 mm². Its 21-pole configuration enables multiple electrical circuits to be grouped within a single pluggable interface, supporting organised wiring and modular equipment construction.
A distinguishing feature of the WAGO 231-651/018-000 is its integrated snap-in mounting feet. These provide a practical means of mechanically supporting the connector in compatible panel installations.
For panel mounting, the snap-in feet engage with appropriately prepared fixing openings. The specified mounting arrangement supports a panel thickness of 0.6–1.2 mm and uses 3.5 mm fixing holes. Installers should consult WAGO's dimensional drawing to confirm the complete mounting layout before preparing a panel.
The connector can also be installed on a DIN-35 mounting rail when used with the compatible WAGO 209-137 mounting adapter. This makes it suitable for electrical control cabinets where DIN rail installation is preferred.
The snap-in mounting arrangement helps maintain connector positioning and provides a convenient solution for modular industrial wiring systems. It also distinguishes this variant from the standard WAGO 231-651, which does not have the same integrated snap-in mounting feet.
The WAGO 231-651/018-000 is a male pluggable connector intended to mate with a compatible female component from the appropriate WAGO connector system.
The mating connector must match the 21-pole configuration, 5.08 mm pitch, mechanical profile and electrical ratings. Any applicable connector coding or locking requirements must also be considered.
When correctly specified, a pluggable connection system can simplify equipment assembly, maintenance and replacement by allowing electrical interfaces to be separated after the circuit has been safely isolated.
The 231-651/018-000 is particularly useful where a mechanically supported connector interface is required rather than a purely free-hanging cable connection.
The WAGO 231-651/018-000 has an IEC rated current of 12 A and an IEC rated voltage of 630 V under overvoltage category II, pollution degree 2. Under applicable UL approval conditions, the connector is specified at 15 A and 600 V.
The permitted operating current and voltage depend on the complete connector assembly, conductor size, mating component, installation environment and applicable electrical standards.
WAGO MCS MIDI Classic connectors are intended for electrical connections without breaking capacity unless expressly specified otherwise. They must therefore not be connected or disconnected while live or under load. Always safely isolate the circuit before mating or unmating, and ensure that exposed male contacts cannot remain energised when disconnected.
The specified temperature range should be assessed alongside the electrical ratings and installation conditions rather than treated as an unrestricted operating temperature for every application.
Tick the specs you need, then view products that match.
| Current | 12 A | |
|---|---|---|
| Voltage | 320 V | |
| Product Series | WAGO 231 | |
| Rated surge voltage | 4 kV | |
| Number of plug-in contact rows | 1 | |
| Connectable cable type | Tubular cable | |
| Flammability class of insulation material according to UL 94 | V0 | |
| Operating temperature | -60 – 100 °C | |
| Rated current In | 12 A | |
| Connectable conductor cross section fine-strand without cable end sleeve | 0.08 – 2.5 mm² | |
| Degree of protection (IP), mounted | IP10 | |
| Material insulation body | Thermoplastic | |
| Coating housing | Uncoated | |
| Connectable conductor cross section multi-wired | 0.08 – 2.5 mm² | |
| Housing colour | Orange | |
| Modular spacing contacts | 5.08 mm | |
| Angle contact/conductor connection | 180° (horizontal) | |
| Contact type | Pin | |
| Material contact | Other copper alloys | |
| Type of electric connection | Spring clamp connection | |
| Housing material | Plastic | |
| Type of connection | Printed circuit board to cable | |
| Connectable conductor cross section fine-strand with cable end sleeve | 0.25 – 1.5 mm² | |
| Modular spacing connections | 5.08 mm | |
| Number of poles | 21 | |
| Material of contact surface | Tin | |
| Rated voltage | 320 V | |
| Pollution degree | 2 | |
| Connectable conductor cross section solid-core | 0.08 – 2.5 mm² | |
| Overvoltage category | III | |
| Manufacturer | WAGO | |
| Manufacturer part number | 231-651/018-000 | |
| Series | 231 Series / MCS MIDI Classic | |
| Product type | Male pluggable terminal block connector | |
| Manufacturer description | 1-conductor male connector; CAGE CLAMP®; 2.5 mm²; 5.08 mm pitch; 21-pole; DIN-35 rail/panel mounting; snap-in mounting feet; orange | |
| Connector gender | Male | |
| Number of connection positions | 21 | |
| Positions per level | 21 | |
| Number of levels | 1 | |
| Contact pitch | 5.08 mm | |
| Rated current (IEC) | 12 A | |
| Rated voltage (IEC, II/2) | 630 V | |
| Rated current (UL) | 15 A, subject to applicable approval conditions | |
| Rated voltage (UL) | 600 V, subject to applicable approval conditions | |
| Connection technology | CAGE CLAMP® | |
| Termination method | Screwless spring pressure clamp | |
| Actuation method | Operating tool | |
| Solid conductor cross-section | 0.08–2.5 mm² | |
| Fine-stranded conductor cross-section | 0.08–2.5 mm² | |
| Conductor size | 28–12 AWG | |
| Conductor stripping length | 8–9 mm | |
| Conductor entry orientation | 180° in-line | |
| Mounting configuration | Snap-in mounting feet | |
| Mounting applications | Panel mounting and DIN-35 rail mounting with compatible adapter | |
| DIN rail mounting adapter | WAGO 209-137 | |
| Specified panel thickness | 0.6–1.2 mm | |
| Fixing hole diameter | 3.5 mm | |
| Connector arrangement | Pluggable male connector for compatible female mating components | |
| Connection applications | Wire-to-wire and board-to-wire | |
| Insulation height | 14.3 mm | |
| Contact material | Electrolytic copper | |
| Contact plating | Tin | |
| Material flammability classification | UL 94 V-0 | |
| Specified temperature range | −60 to +100 °C | |
| Manufacturer standard packaging unit | 10 pieces | |
| Country of origin | Germany | |
| GTIN / EAN | 4044918261241 |
The WAGO 231-651/018-000 is a 21-pole male pluggable connector designed for industrial automation, control panels and machinery. Its integrated snap-in mounting feet support panel installation and DIN-35 rail mounting with a suitable adapter.
The connector has 21 poles, providing twenty-one independent electrical connection positions with a 5.08 mm contact pitch.
The connector has an IEC rated current of 12 A and a UL current rating of 15 A under applicable approval conditions. The permitted operating current depends on the complete installation and mating connector.
The connector has an IEC rated voltage of 630 V under overvoltage category II, pollution degree 2. A 600 V UL rating applies under the relevant approval conditions.
The connector accepts solid and fine-stranded copper conductors from 0.08–2.5 mm² (28–12 AWG). The recommended conductor stripping length is 8–9 mm.
No. The connector uses WAGO CAGE CLAMP® spring pressure technology, which secures conductors without conventional terminal screws. A suitable operating tool is used to open the spring clamp during conductor insertion and removal.
The connector features integrated snap-in mounting feet for compatible panel installations. It can also be mounted on a DIN-35 rail using the appropriate mounting adapter.
The WAGO 209-137 mounting adapter can be used to support installation of the connector on a DIN-35 mounting rail. The adapter should be selected and installed according to WAGO's instructions.
Both are 21-pole male connectors from the WAGO 231 Series with a 5.08 mm pitch and CAGE CLAMP® termination. The standard 231-651 is a free-hanging connector, while the 231-651/018-000 features integrated snap-in mounting feet for mechanically supported installations.
No. WAGO MCS MIDI Classic connectors without breaking capacity must not be connected or disconnected while live or under load. The electrical circuit must be safely isolated before mating or unmating the connector.
WAGO MCS MIDI Classic connectors provide electrical engineers, automation specialists and OEM machine builders with dependable CAGE CLAMP® spring pressure technology, modular wiring flexibility and practical mounting solutions for industrial control systems, machinery and electrical equipment.
Manufacturer product reference: WAGO 231-651/018-000 product information. Confirm the latest manufacturer documentation, dimensional drawings and compatible mating components before final specification.
We use cookies
We use essential cookies to run this site, your basket and checkout. With your permission we'd also like to use analytics and advertising cookies to understand how the site is used and to measure our adverts.