Standard delivery
£8 ex VAT · free over £200UK parcel delivery is £8 ex VAT, or free on orders over £200 ex VAT.
Heavier items may be charged at a weight-based or pallet rate, shown at checkout.
£8.03
The WAGO 231-649 is a 19-pole male pluggable connector from the WAGO MCS MIDI Classic 231 Series. Designed for reliable modular wiring in industrial automation, electrical control panels and machinery, it features WAGO's established CAGE CLAMP® spring pressure connection technology for secure, screwless conductor termination.
With a 5.08 mm contact pitch, 12 A IEC rated current and conductor capacity of 0.08–2.5 mm², the WAGO 231-649 provides nineteen independent electrical connections in a compact, single-level arrangement. Its 180° in-line conductor entry and free-hanging configuration make it suitable for cable assemblies and detachable equipment connections.
The connector features an orange polyamide housing, tin-plated copper contacts and tool-operated spring clamps. It is intended to mate with a compatible female connector, making it a practical choice for wire-to-wire and board-to-wire applications where modular assembly, maintenance access and dependable electrical contact are important.
The WAGO 231-649 uses WAGO's established CAGE CLAMP® spring pressure termination system to connect electrical conductors without conventional terminal screws. A suitable operating tool opens the spring clamp, allowing the prepared conductor to be inserted. When the clamp is released, the spring mechanism maintains contact pressure on the conductor.
This connection technology supports efficient installation and helps reduce maintenance associated with screw-terminal retightening. It is particularly useful in industrial control systems and machinery where consistent conductor contact and repeatable assembly procedures are important.
The connector accommodates solid and fine-stranded copper conductors from 0.08–2.5 mm². Its 19-pole configuration allows multiple circuits to be grouped within a single detachable electrical connection, helping organise wiring in complex equipment assemblies.
The WAGO 231-649 is the standard free-hanging, in-line male connector in this product configuration. Unlike variants fitted with mounting feet or flanges, it does not rely on an integrated panel-mounting arrangement for its primary installation method.
This makes it suitable for modular cable assemblies and equipment interconnections where the connector is supported by the wiring arrangement and appropriate cable management. The 180° conductor entry helps provide a straightforward cable exit direction.
The connector must be paired with a compatible 19-pole female mating component with the correct 5.08 mm pitch, mechanical profile and electrical ratings. Compatible mating components should be selected using WAGO's product compatibility information rather than pitch and pole count alone.
Other WAGO 231-649 variants are available with alternative mounting arrangements. For example, 231-649/018-000 incorporates snap-in mounting feet, while 231-649/019-000 uses a mounting flange. These are distinct ordering codes and should not be treated as mechanically identical to the standard 231-649.
The WAGO 231-649 has an IEC rated current of 12 A and an IEC rated voltage of 630 V under overvoltage category II, pollution degree 2. UL ratings are listed as 15 A and 600 V under the relevant approval conditions.
These ratings depend on the applicable installation standard, conductor selection, mating connector and operating environment. The electrical design must comply with the relevant voltage, current and insulation coordination requirements.
WAGO MCS MIDI Classic connectors are part of a system that includes connectors without breaking capacity under IEC/EN 61984. They must therefore not be connected or disconnected while live or under load. Always isolate the electrical circuit before mating or unmating, and ensure that accessible male contacts cannot remain energised when disconnected.
Tick the specs you need, then view products that match.
| Current | 12 A | |
|---|---|---|
| Voltage | 320 V | |
| Product Series | WAGO 231 | |
| Rated surge voltage | 4 kV | |
| Number of plug-in contact rows | 1 | |
| Connectable cable type | Tubular cable | |
| Flammability class of insulation material according to UL 94 | V0 | |
| Operating temperature | -60 – 100 °C | |
| Rated current In | 12 A | |
| Connectable conductor cross section fine-strand without cable end sleeve | 0.08 – 2.5 mm² | |
| Degree of protection (IP), mounted | IP10 | |
| Material insulation body | Thermoplastic | |
| Coating housing | Uncoated | |
| Connectable conductor cross section multi-wired | 0.08 – 2.5 mm² | |
| Housing colour | Orange | |
| Modular spacing contacts | 5.08 mm | |
| Angle contact/conductor connection | 180° (horizontal) | |
| Contact type | Pin | |
| Material contact | Other copper alloys | |
| Type of electric connection | Spring clamp connection | |
| Housing material | Plastic | |
| Type of connection | Printed circuit board to cable | |
| Connectable conductor cross section fine-strand with cable end sleeve | 0.25 – 1.5 mm² | |
| Modular spacing connections | 5.08 mm | |
| Number of poles | 19 | |
| Material of contact surface | Tin | |
| Rated voltage | 320 V | |
| Pollution degree | 2 | |
| Connectable conductor cross section solid-core | 0.08 – 2.5 mm² | |
| Overvoltage category | III | |
| Manufacturer | WAGO | |
| Manufacturer part number | 231-649 | |
| Series | 231 Series / MCS MIDI Classic | |
| Product type | Male pluggable terminal block connector | |
| Connector description | 1-conductor male connector | |
| Connector gender | Male | |
| Number of connection positions | 19 | |
| Number of potentials | 19 | |
| Number of levels | 1 | |
| Contact pitch | 5.08 mm | |
| Rated current (IEC) | 12 A | |
| Rated voltage (IEC, II/2) | 630 V | |
| Rated impulse voltage (IEC, II/2) | 4 kV | |
| Rated current (UL) | 15 A, subject to applicable approval conditions | |
| Rated voltage (UL) | 600 V, subject to applicable approval conditions | |
| Connection technology | CAGE CLAMP® | |
| Termination method | Screwless spring pressure clamp | |
| Actuation method | Operating tool | |
| Solid conductor cross-section | 0.08–2.5 mm² | |
| Fine-stranded conductor cross-section | 0.08–2.5 mm² | |
| Conductor size | 28–12 AWG | |
| Conductor stripping length | 8–9 mm | |
| Conductor entry orientation | 180° in-line | |
| Mounting type | Free-hanging / in-line | |
| Connector arrangement | Pluggable male connector for compatible female mating components | |
| Connection applications | Wire-to-wire and board-to-wire | |
| Width | 99.72 mm | |
| Height | 14.3 mm | |
| Depth | 27.5 mm | |
| Dimensions (W × H × D) | 99.72 × 14.3 × 27.5 mm | |
| Approximate weight | 29.3 g | |
| Contact material | Electrolytic copper | |
| Contact plating | Tin | |
| Material flammability classification | UL 94 V-0 | |
| Material temperature range | −60 to +100 °C | |
| GTIN / EAN | 4044918261159 |
The WAGO 231-649 is a 19-pole male pluggable connector designed for modular electrical connections in industrial automation, control panels and machinery. It uses CAGE CLAMP® spring pressure termination and has a free-hanging, in-line configuration.
The connector has 19 poles, providing nineteen independent electrical connection positions with a 5.08 mm contact pitch.
The connector has an IEC rated current of 12 A and a UL rated current of 15 A under applicable approval conditions. The permitted operating current depends on the complete installation and mating connector.
The connector has an IEC rated voltage of 630 V under overvoltage category II, pollution degree 2. A 600 V UL rating applies under the relevant approval conditions.
The connector accepts solid and fine-stranded copper conductors from 0.08–2.5 mm² (28–12 AWG). The recommended conductor stripping length is 8–9 mm.
No. The connector uses WAGO CAGE CLAMP® spring pressure technology, which secures conductors without conventional terminal screws. A suitable operating tool is used to open the spring clamp during conductor insertion and removal.
The standard WAGO 231-649 has a free-hanging, in-line mounting configuration. Separate variants are available with snap-in mounting feet or mounting flanges for applications requiring additional mechanical support.
Both are 19-pole male connectors from the WAGO 231 Series with a 5.08 mm pitch and CAGE CLAMP® termination. The standard 231-649 has a free-hanging configuration, while the 231-649/019-000 features a mounting flange for compatible panel installations.
The connector measures approximately 99.72 mm wide, 14.3 mm high and 27.5 mm deep, with an approximate weight of 29.3 g.
No. WAGO MCS MIDI Classic connectors without breaking capacity must not be connected or disconnected while live or under load. The electrical circuit must be safely isolated before mating or unmating the connector.
WAGO MCS MIDI Classic connectors provide electrical engineers, automation specialists and OEM machine builders with dependable CAGE CLAMP® spring pressure technology and modular connection options for industrial control systems, machinery and electrical equipment.
Manufacturer product reference: WAGO 231-649 product information. Confirm the latest manufacturer documentation and compatible mating components before final specification.
We use cookies
We use essential cookies to run this site, your basket and checkout. With your permission we'd also like to use analytics and advertising cookies to understand how the site is used and to measure our adverts.