Standard delivery
£8 ex VAT · free over £200UK parcel delivery is £8 ex VAT, or free on orders over £200 ex VAT.
Heavier items may be charged at a weight-based or pallet rate, shown at checkout.
£6.64
The WAGO 231-646 is a reliable and versatile 16-pole pluggable male terminal block connector designed for secure electrical connections in industrial automation, control panels and electronic equipment. As part of the established WAGO MCS MIDI Classic 231 Series, this connector features innovative CAGE CLAMP® spring pressure connection technology, providing dependable conductor termination without conventional screw connections.
Designed for efficient installation and long-term reliability, the WAGO 231-646 accommodates solid and fine-stranded conductors with cross-sections from 0.08–2.5 mm². Its spring clamp technology provides consistent contact pressure, helping maintain secure electrical connections even in industrial environments exposed to vibration and mechanical stress. The pluggable design allows convenient cable pre-assembly, maintenance and equipment replacement.
With 16 connection poles, a 5.08 mm pin spacing and a rated current of 12 A under IEC specifications, the WAGO 231-646 is suitable for industrial signal distribution, control wiring and electrical interconnection applications. Its compact orange polyamide housing and tin-plated copper contacts make it a practical solution for wire-to-wire and board-to-wire connections when used with compatible mating connectors.
The WAGO 231-646 uses WAGO's proven CAGE CLAMP® spring pressure connection system to create secure electrical connections between conductors and the connector contacts. Unlike conventional screw terminal connections, the spring clamp mechanism applies continuous contact pressure to the inserted conductor, helping maintain a stable electrical connection without periodic screw tightening.
Installation is performed using a suitable operating tool to open the spring clamp, allowing the prepared conductor to be inserted into the terminal. Once the tool is removed, the spring mechanism secures the conductor in position. This technology supports efficient wiring and reduces the risk of loose connections associated with incorrectly tightened screw terminals.
The 16-pole configuration allows multiple independent electrical circuits to be connected through a single compact pluggable assembly. With its 5.08 mm pitch, the connector is designed to interface with compatible components from the WAGO MCS MIDI Classic system, providing a practical solution for modular machine wiring and control cabinet interconnections.
Its durable polyamide housing provides electrical insulation and mechanical protection, while tin-plated electrolytic copper contacts support dependable electrical performance. The pluggable format also enables convenient disconnection of equipment during inspection, servicing or replacement, helping reduce maintenance time in industrial installations.
Tick the specs you need, then view products that match.
| Current | 12 A | |
|---|---|---|
| Voltage | 320 V | |
| Product Series | WAGO 231 | |
| Rated surge voltage | 4 kV | |
| Number of plug-in contact rows | 1 | |
| Connectable cable type | Tubular cable | |
| Flammability class of insulation material according to UL 94 | V0 | |
| Operating temperature | -60 – 100 °C | |
| Rated current In | 12 A | |
| Connectable conductor cross section fine-strand without cable end sleeve | 0.08 – 2.5 mm² | |
| Degree of protection (IP), mounted | IP10 | |
| Material insulation body | Thermoplastic | |
| Coating housing | Uncoated | |
| Connectable conductor cross section multi-wired | 0.08 – 2.5 mm² | |
| Housing colour | Orange | |
| Modular spacing contacts | 5.08 mm | |
| Angle contact/conductor connection | 180° (horizontal) | |
| Contact type | Pin | |
| Material contact | Other copper alloys | |
| Type of electric connection | Spring clamp connection | |
| Housing material | Plastic | |
| Type of connection | Printed circuit board to cable | |
| Connectable conductor cross section fine-strand with cable end sleeve | 0.25 – 1.5 mm² | |
| Modular spacing connections | 5.08 mm | |
| Number of poles | 16 | |
| Material of contact surface | Tin | |
| Rated voltage | 320 V | |
| Pollution degree | 2 | |
| Connectable conductor cross section solid-core | 0.08 – 2.5 mm² | |
| Overvoltage category | III | |
| Manufacturer | WAGO | |
| Series | MCS MIDI Classic 231 Series | |
| Model | 231-646 | |
| Product type | Pluggable male terminal block connector | |
| Connector gender | Male | |
| Number of connection levels | 1 | |
| Connection technology | CAGE CLAMP® spring pressure connection | |
| Termination type | Screwless spring clamp | |
| Actuation method | Operating tool | |
| Pin spacing | 5.08 mm | |
| Rated current (IEC) | 12 A | |
| Rated voltage (IEC, II/2) | 630 V | |
| Rated voltage (IEC, III/3) | 320 V | |
| Rated impulse voltage | 4 kV | |
| Rated current (UL) | 15 A | |
| Rated voltage (UL) | 600 V | |
| Conductor cross-section | 0.08–2.5 mm² | |
| Conductor size (AWG) | 28–12 AWG | |
| Supported conductor types | Solid and fine-stranded copper conductors | |
| Wire stripping length | 8–9 mm | |
| Conductor entry | Inline, 180° plug wire entry | |
| Contact material | Electrolytic copper | |
| Contact surface | Tin-plated | |
| Clamping spring material | Chrome-nickel spring steel | |
| Colour | Orange | |
| Flammability rating | UL 94 V-0 | |
| Operating temperature range | −60 to +100 °C | |
| Mounting type | Free-hanging / inline pluggable connection | |
| Dimensions (W × H × D) | approx. 84.48 × 14.3 × 27.5 mm | |
| Weight | approx. 24.4 g |
The WAGO 231-646 is a 16-pole pluggable male connector used to establish secure electrical connections in industrial automation systems, control panels, machinery and electronic equipment. It is suitable for wire-to-wire and board-to-wire connections with compatible mating connectors.
The connector has 16 individual connection poles arranged at a 5.08 mm pitch, allowing multiple electrical circuits to be connected through one compact assembly.
The WAGO 231-646 supports solid and fine-stranded conductors with cross-sections from 0.08–2.5 mm², equivalent to approximately 28–12 AWG. The recommended conductor stripping length is 8–9 mm.
The WAGO 231-646 has an IEC rated current of 12 A. Its IEC rated voltage is 630 V under overvoltage category II, pollution degree 2 conditions, or 320 V under category III, pollution degree 3 conditions. The applicable rating depends on the installation conditions and relevant standards.
No. The connector uses WAGO CAGE CLAMP® spring pressure technology, which secures conductors without conventional terminal screws. An appropriate operating tool is used to open the clamp during conductor insertion or removal.
WAGO MCS MIDI Classic pluggable connectors are designed to provide dependable, efficient and maintenance-friendly electrical connections in industrial automation and control systems. The WAGO 231-646 combines proven CAGE CLAMP® technology, a compact 16-pole configuration and durable construction to support reliable wiring in modern industrial equipment.
We use cookies
We use essential cookies to run this site, your basket and checkout. With your permission we'd also like to use analytics and advertising cookies to understand how the site is used and to measure our adverts.