Standard delivery
£8 ex VAT · free over £200UK parcel delivery is £8 ex VAT, or free on orders over £200 ex VAT.
Heavier items may be charged at a weight-based or pallet rate, shown at checkout.
£7.20
The WAGO 231-646/019-000/050-000 is a 16-pole male pluggable connector from the WAGO 231 Series MCS MIDI Classic family, designed for dependable electrical connections in industrial automation, control panels and machinery. Featuring WAGO's established CAGE CLAMP® spring pressure connection technology, it provides secure, screwless conductor termination in a compact, modular connector arrangement.
With 16 independent connection positions and a 5.08 mm contact pitch, this connector is suitable for applications requiring multiple electrical circuits to be connected through a single pluggable interface. The corresponding 231-646/019-000 design incorporates a clamping collar and mounting flange arrangement, supporting integration into compatible industrial panel and equipment installations.
The connector family supports copper conductors from 0.08–2.5 mm², with a typical 12 A IEC rated current. Its orange insulating housing, tin-plated contacts and spring pressure termination system make it a practical solution for OEM machinery, industrial control cabinets and modular electrical assemblies.
Variant identification: The complete ordering code includes the suffix /050-000. The core connector characteristics are supported by WAGO's published information for the 231-646/019-000 design; any additional configuration or supply differences associated with the final suffix should be confirmed against the manufacturer's exact variant documentation.
The WAGO 231-646/019-000/050-000 belongs to a connector family designed around WAGO's proven CAGE CLAMP® spring pressure termination system. Instead of tightening individual terminal screws, the installer uses an appropriate operating tool to open the spring clamp, insert the prepared conductor and allow the spring to secure the electrical connection.
This approach provides a convenient means of terminating solid and fine-stranded copper conductors while helping maintain consistent contact pressure. It is particularly useful for industrial equipment where reliable electrical connections, repeatable assembly procedures and efficient servicing are important.
The 16-pole configuration allows multiple electrical circuits to be grouped within a single connector. This can simplify wiring layouts in control panels, modular machinery and electronic equipment, while the 5.08 mm pitch provides a practical balance between connection density and conductor capacity.
The corresponding WAGO 231-646/019-000 connector is specified with a clamping collar and mounting flange. These features support applications where the connector requires mechanical positioning or additional support within an electrical assembly.
As a male pluggable connector, the unit is intended to mate with a compatible female connector or socket rather than being treated as a conventional screw terminal strip. This makes it suitable for modular equipment connections that may need to be separated during maintenance or replacement after the circuit has been safely isolated.
When selecting a mating connector, engineers should verify the 16-pole arrangement, 5.08 mm pitch, connector gender, coding compatibility and electrical ratings. The exact mounting details and any differences introduced by the /050-000 suffix should be checked against the relevant WAGO dimensional drawing before installation.
The corresponding standard 231-646/019-000 connector is listed with an IEC rated current of 12 A and an IEC voltage rating up to 630 V under the applicable insulation coordination conditions. The actual permissible operating ratings depend on the conductor size, mating connector, environmental conditions and relevant electrical standards.
WAGO MCS MIDI Classic connectors are used in connection systems that include connectors without breaking capacity under IEC/EN 61984. They must therefore not be connected or disconnected while live or under load. The circuit must be safely isolated before mating or unmating, and accessible male contacts must not remain energised when disconnected.
For the exact 231-646/019-000/050-000 variant, the manufacturer's technical documentation should be consulted to confirm whether the additional suffix affects any electrical, mechanical or ordering characteristics.
| Manufacturer | WAGO |
|---|---|
| Full part number | 231-646/019-000/050-000 |
| Base configuration | 231-646/019-000 |
| Series | 231 Series / MCS MIDI Classic |
| Product type | Male pluggable terminal block connector |
| Connector description | 1-conductor male connector |
| Connector gender | Male |
| Number of poles | 16 |
| Number of connection positions | 16 |
| Number of levels | 1 |
| Contact pitch | 5.08 mm |
| Rated current (IEC, base configuration) | 12 A |
| Rated voltage (IEC, base configuration) | Up to 630 V, depending on insulation coordination conditions |
| Rated current (UL, base configuration) | 15 A |
| Rated voltage (UL, base configuration) | Up to 600 V, subject to applicable approval conditions |
| Connection technology | CAGE CLAMP® |
| Termination method | Screwless spring pressure clamp |
| Actuation method | Suitable operating tool |
| Solid conductor cross-section | 0.08–2.5 mm² |
| Fine-stranded conductor cross-section | 0.08–2.5 mm² |
| Conductor size | 28–12 AWG |
| Conductor stripping length | 8–9 mm |
| Conductor entry orientation | 180° in-line |
| Connector arrangement | Pluggable male connector for compatible female mating components |
| Connection applications | Wire-to-wire and board-to-wire |
| Insulation height (base configuration) | 14.3 mm |
| Contact material | Electrolytic copper |
| Contact plating | Tin |
| Housing material | Polyamide 66 (PA66) |
| Housing colour (base configuration) | Orange |
| Flammability classification | UL 94 V-0 |
| Material temperature range (base configuration) | −60 to +100 °C |
| Relevant connector standard | IEC/EN 61984 |
| Additional variant suffix | /050-000; exact variant-specific characteristics require manufacturer confirmation |
The WAGO 231-646/019-000/050-000 is a 16-pole male pluggable connector intended for modular electrical connections in industrial automation, machinery and control panels. It belongs to the WAGO 231 Series MCS MIDI Classic family.
The connector has 16 poles, providing sixteen independent electrical connection positions with a 5.08 mm contact pitch.
The corresponding standard WAGO 231-646/019-000 connector has an IEC rated current of 12 A and a UL current rating of 15 A under applicable approval conditions. The exact /050-000 variant rating should be confirmed against WAGO documentation.
The corresponding base connector is listed with an IEC voltage rating up to 630 V and a UL voltage rating up to 600 V, subject to the applicable installation and approval conditions. Variant-specific ratings should be verified before use.
The corresponding connector family supports solid and fine-stranded copper conductors from 0.08–2.5 mm² (28–12 AWG). The recommended conductor stripping length is 8–9 mm.
No. The connector family uses WAGO CAGE CLAMP® spring pressure technology, allowing conductors to be terminated without conventional terminal screws. A suitable operating tool is used to open the spring clamp.
The corresponding 231-646/019-000 design features a clamping collar and mounting flange. The exact mechanical arrangement of the full /050-000 variant should be checked against its manufacturer's dimensional drawing.
The /050-000 suffix forms part of the full WAGO ordering code and distinguishes this item from the standard 231-646/019-000 listing. The precise significance of the suffix has not been independently confirmed, so any associated configuration or supply differences should be checked with WAGO.
Both ordering codes refer to the 231-646/019-000 connector configuration, associated with a 16-pole male connector, CAGE CLAMP® termination and a 5.08 mm pitch. The additional /050-000 suffix identifies a separate variant, but its exact effect requires manufacturer confirmation.
No. WAGO MCS MIDI Classic connectors without breaking capacity must not be connected or disconnected while live or under load. The electrical circuit must be safely isolated before mating or unmating the connector.
WAGO MCS MIDI Classic connectors offer electrical engineers, automation specialists and OEM machine builders dependable spring pressure connection technology, modular wiring flexibility and practical connector configurations for industrial control systems, machinery and electrical equipment.
We use cookies
We use essential cookies to run this site, your basket and checkout. With your permission we'd also like to use analytics and advertising cookies to understand how the site is used and to measure our adverts.