Standard delivery
£8 ex VAT · free over £200UK parcel delivery is £8 ex VAT, or free on orders over £200 ex VAT.
Heavier items may be charged at a weight-based or pallet rate, shown at checkout.
£6.89
The WAGO 231-646/018-000 is a 16-pole male pluggable connector with snap-in mounting feet from the WAGO MCS MIDI Classic 231 Series. Designed for reliable electrical connections in industrial control panels, machinery and automation equipment, this connector combines CAGE CLAMP® spring pressure technology with a practical mounting arrangement suitable for DIN-35 rail and panel installations.
Featuring a 5.08 mm contact pitch and sixteen individual connection positions, the WAGO 231-646/018-000 provides an organised interface for multiple electrical circuits. Its snap-in mounting feet allow the connector to be mechanically secured in compatible mounting arrangements, while the CAGE CLAMP® connection system enables dependable conductor termination without conventional screw terminals.
The connector supports suitable solid and fine-stranded conductors from 0.08–2.5 mm² and has an IEC rated current of 12 A. With its orange polyamide housing, tin-plated copper contacts and modular pluggable construction, the WAGO 231-646/018-000 is a practical choice for industrial electrical installations requiring secure mounting, efficient wiring and convenient equipment maintenance.
The WAGO MCS MIDI Classic 231 Series provides modular electrical connections for industrial equipment requiring dependable conductor termination and detachable wiring interfaces. Its CAGE CLAMP® spring pressure technology maintains electrical contact through a spring-loaded clamping mechanism, eliminating conventional screw tightening. Vertical and horizontal actuation enables convenient cable pre-assembly and on-unit wiring, while the modular connector system supports compatible wire-to-wire and board-to-wire connections.
The WAGO 231-646/018-000 incorporates snap-in mounting feet that enable mechanical retention in compatible DIN-35 rail and panel mounting arrangements. This makes it particularly suitable for control cabinets, modular electrical assemblies and industrial equipment requiring securely positioned connector interfaces. The MCS MIDI Classic system does not provide load-breaking capability, so connectors must not be connected or disconnected while live or under load. Exposed male contacts must not remain energised when unmated.
Tick the specs you need, then view products that match.
| Current | 12 A | |
|---|---|---|
| Voltage | 320 V | |
| Product Series | WAGO 231 | |
| Rated surge voltage | 4 kV | |
| Number of plug-in contact rows | 1 | |
| Connectable cable type | Tubular cable | |
| Flammability class of insulation material according to UL 94 | V0 | |
| Operating temperature | -60 – 100 °C | |
| Rated current In | 12 A | |
| Connectable conductor cross section fine-strand without cable end sleeve | 0.08 – 2.5 mm² | |
| Degree of protection (IP), mounted | IP10 | |
| Material insulation body | Thermoplastic | |
| Coating housing | Uncoated | |
| Connectable conductor cross section multi-wired | 0.08 – 2.5 mm² | |
| Housing colour | Orange | |
| Modular spacing contacts | 5.08 mm | |
| Angle contact/conductor connection | 180° (horizontal) | |
| Contact type | Pin | |
| Material contact | Other copper alloys | |
| Type of electric connection | Spring clamp connection | |
| Housing material | Plastic | |
| Type of connection | Printed circuit board to cable | |
| Connectable conductor cross section fine-strand with cable end sleeve | 0.25 – 1.5 mm² | |
| Modular spacing connections | 5.08 mm | |
| Number of poles | 16 | |
| Material of contact surface | Tin | |
| Rated voltage | 320 V | |
| Pollution degree | 2 | |
| Connectable conductor cross section solid-core | 0.08 – 2.5 mm² | |
| Overvoltage category | III | |
| Manufacturer | WAGO | |
| Manufacturer part number | 231-646/018-000 | |
| Series | MCS MIDI Classic – 231 Series | |
| Product type | 1-conductor male pluggable connector | |
| Connector gender | Male | |
| Number of connection points | 16 | |
| Number of levels | 1 | |
| Nominal contact pitch | 5.08 mm | |
| IEC rated current | 12 A | |
| IEC rated voltage (III/3) | 320 V | |
| IEC rated voltage (III/2) | 320 V | |
| IEC rated voltage (II/2) | 630 V | |
| IEC rated impulse voltage | 4 kV | |
| UL rated current | 15 A (applicable approval conditions) | |
| UL rated voltage | 600 V (applicable approval conditions) | |
| Connection technology | CAGE CLAMP® spring pressure connection | |
| Actuation | Operating tool | |
| Solid conductor cross-section | 0.08–2.5 mm² | |
| Fine-stranded conductor cross-section | 0.08–2.5 mm² | |
| Conductor size | 28–12 AWG | |
| Fine-stranded conductor with insulated ferrule | 0.25–1.5 mm² | |
| Fine-stranded conductor with uninsulated ferrule | 0.25–2.5 mm² | |
| Conductor stripping length | 8–9 mm | |
| Mounting type | Snap-in mounting feet | |
| Mounting arrangement | DIN-35 rail/panel mounting | |
| Compatible panel thickness | 0.6–1.2 mm | |
| Contact material | Electrolytic copper | |
| Contact plating | Tin | |
| Insulating material | Polyamide PA66 | |
| Flammability classification | UL 94 V-0 | |
| Temperature limit range | −60 to +100 °C | |
| Width | 84.48 mm | |
| Height | 18.8 mm | |
| Depth | 27.5 mm | |
| Dimensions (W × H × D) | 84.48 × 18.8 × 27.5 mm | |
| Height from mounting surface | 14.3 mm | |
| Weight | Approx. 23.61 g | |
| GTIN | 4044918260978 | |
| Packaging unit | 25 pieces | |
| Country of origin | Germany | |
| Applicable connector standard | IEC/EN 61984 | |
| Connector system | MCS – Multi Connection System |
The WAGO 231-646/018-000 is a 16-pole male pluggable connector with snap-in mounting feet, designed for detachable electrical connections in industrial control panels, automation equipment, machinery and compatible DIN-35 rail or panel-mounted assemblies.
The connector has 16 poles, providing sixteen individual conductor connection positions with a nominal contact pitch of 5.08 mm.
The snap-in mounting feet allow the connector to be mechanically secured in compatible DIN-35 rail and panel mounting arrangements. They help maintain connector positioning during installation, equipment operation and maintenance.
The connector has an IEC rated current of 12 A. A 15 A UL current rating also applies under specified approval conditions. The permissible operating current depends on the mating connector, conductor selection and installation environment.
The connector supports suitable solid and fine-stranded conductors from 0.08–2.5 mm², equivalent to 28–12 AWG. The recommended conductor stripping length is 8–9 mm.
The connector uses WAGO CAGE CLAMP® spring pressure technology, providing secure conductor termination through an operating-tool-actuated spring clamp without conventional screw terminals.
The connector measures approximately 84.48 mm wide, 18.8 mm high and 27.5 mm deep, including its snap-in mounting configuration.
Yes. As a male pluggable connector, it requires a compatible female mating component to establish a complete detachable electrical connection. Mating compatibility should be checked against the exact WAGO connector configuration.
No. The WAGO MCS MIDI Classic connector system does not provide load-breaking capability. The relevant electrical circuit must be safely isolated and de-energised before connecting or disconnecting the connector.
WAGO MCS MIDI Classic connectors are established components in industrial control panel construction, electrical installations and automation equipment. The WAGO 231-646/018-000 combines sixteen-pole connectivity, CAGE CLAMP® spring pressure technology and snap-in DIN rail/panel mounting to support organised wiring, dependable conductor termination and efficient equipment installation and maintenance.
We use cookies
We use essential cookies to run this site, your basket and checkout. With your permission we'd also like to use analytics and advertising cookies to understand how the site is used and to measure our adverts.