Standard delivery
£8 ex VAT · free over £200UK parcel delivery is £8 ex VAT, or free on orders over £200 ex VAT.
Heavier items may be charged at a weight-based or pallet rate, shown at checkout.
£5.79
The WAGO 231-643/019-000 is a 13-pole male pluggable electrical connector with mounting flange and clamping collar from the WAGO MCS MIDI Classic 231 Series. Designed for industrial automation, machine building and electrical control systems, this connector combines a 5.08 mm contact pitch with WAGO's established CAGE CLAMP® spring pressure connection technology for dependable, screwless conductor termination.
Featuring thirteen independent conductor connection positions, the WAGO 231-643/019-000 provides a convenient detachable interface for multi-circuit wiring. Its integrated mounting flanges support feed-through and panel-mounting applications, helping secure the connector mechanically within electrical equipment rather than relying on the connected conductors for support.
With an IEC rated current of 12 A, rated voltages of 320 V or 630 V depending on installation conditions, and conductor compatibility from 0.08–2.5 mm², this orange 13-pole connector is suitable for a broad range of industrial applications. Its robust insulating housing, tin-plated copper contacts and convenient spring clamp actuation make it a practical choice for OEM equipment, modular machinery and control cabinet wiring.
The WAGO 231-643/019-000 uses CAGE CLAMP® spring pressure technology to provide secure conductor termination without conventional screw terminals. An appropriate operating tool opens the spring clamp, allowing a correctly prepared conductor to be inserted. Releasing the mechanism secures the conductor and establishes the electrical connection.
The 13-pole arrangement with 5.08 mm contact spacing provides an organised interface for multiple control, signal and appropriately rated power circuits. Its pluggable construction supports modular equipment assembly, cable harness preparation and straightforward maintenance.
A distinguishing feature of the /019-000 variant is its mounting flange with clamping collar. The fixing flanges allow the connector to be secured using screws or another suitable mechanical fixing method, supporting panel and feed-through installations. This helps maintain connector alignment and reduces reliance on attached conductors for mechanical support.
The connector supports parallel and perpendicular CAGE CLAMP® actuation relative to conductor entry, offering convenient access during wiring. Its compact housing and mounting arrangement are particularly useful in industrial control cabinets, machinery compartments and electrical assemblies requiring a fixed connector position.
As part of the WAGO MCS MIDI Classic system, the 231-643/019-000 must be paired with a compatible mating connector. Selection should account for the correct pole count, 5.08 mm pitch, coding and mechanical configuration. The mounting flange should not be confused with the separate threaded-flange locking arrangement available on other 231 Series variants.
The connector is not designed for load-breaking operation. Mating and unmating must follow WAGO's installation instructions, and electrical equipment should prevent accessible male contacts from remaining energised when disconnected.
Tick the specs you need, then view products that match.
| Current | 12 A | |
|---|---|---|
| Voltage | 320 V | |
| Product Series | WAGO 231 | |
| Rated surge voltage | 4 kV | |
| Number of plug-in contact rows | 1 | |
| Connectable cable type | Tubular cable | |
| Flammability class of insulation material according to UL 94 | V0 | |
| Operating temperature | -60 – 100 °C | |
| Rated current In | 12 A | |
| Connectable conductor cross section fine-strand without cable end sleeve | 0.08 – 2.5 mm² | |
| Degree of protection (IP), mounted | IP10 | |
| Material insulation body | Thermoplastic | |
| Coating housing | Uncoated | |
| Connectable conductor cross section multi-wired | 0.08 – 2.5 mm² | |
| Housing colour | Orange | |
| Modular spacing contacts | 5.08 mm | |
| Angle contact/conductor connection | 180° (horizontal) | |
| Contact type | Pin | |
| Material contact | Other copper alloys | |
| Type of electric connection | Spring clamp connection | |
| Housing material | Plastic | |
| Type of connection | Printed circuit board to cable | |
| Connectable conductor cross section fine-strand with cable end sleeve | 0.25 – 1.5 mm² | |
| Modular spacing connections | 5.08 mm | |
| Number of poles | 13 | |
| Material of contact surface | Tin | |
| Rated voltage | 320 V | |
| Pollution degree | 2 | |
| Connectable conductor cross section solid-core | 0.08 – 2.5 mm² | |
| Overvoltage category | III | |
| Manufacturer | WAGO | |
| Manufacturer part number | 231-643/019-000 | |
| Product family | MCS MIDI Classic | |
| Series | 231 Series | |
| Product type | 1-conductor male pluggable connector | |
| Connector gender | Male | |
| Number of connection points | 13 | |
| Number of potentials | 13 | |
| Number of levels | 1 | |
| Contact pitch | 5.08 mm | |
| Connection technology | CAGE CLAMP® spring pressure connection | |
| Actuation method | Operating tool | |
| Actuation directions | Parallel and perpendicular to conductor entry | |
| Mounting type | Mounting flange | |
| Mounting applications | Panel mounting and feed-through mounting | |
| Mechanical configuration | Fixing flanges with clamping collar | |
| Rated current (IEC) | 12 A | |
| Rated voltage (IEC, III/3) | 320 V | |
| Rated voltage (IEC, III/2) | 320 V | |
| Rated voltage (IEC, II/2) | 630 V | |
| Rated impulse voltage (IEC) | 4 kV | |
| Rated current (UL) | 15 A | |
| Rated voltage (UL) | 600 V | |
| Solid conductor cross-section | 0.08–2.5 mm² | |
| Fine-stranded conductor cross-section | 0.08–2.5 mm² | |
| Conductor size | 28–12 AWG | |
| Fine-stranded conductor with insulated ferrule | 0.25–1.5 mm² | |
| Fine-stranded conductor with uninsulated ferrule | 0.25–2.5 mm² | |
| Conductor stripping length | 8–9 mm | |
| Width | 80.84 mm | |
| Height | 14.3 mm | |
| Depth | 27.5 mm | |
| Weight | Approximately 21 g | |
| Contact material | Electrolytic copper | |
| Contact plating | Tin | |
| Clamping spring material | Chrome-nickel spring steel | |
| Insulation material | Polyamide 66 (PA66) | |
| Flammability classification | UL 94 V-0 | |
| Material group | I | |
| Temperature limit range | −60 to +100 °C | |
| Country of origin | Germany | |
| GTIN | 4044918260848 | |
| Manufacturer standard pack quantity | 25 pieces | |
| Connection applications | Wire-to-wire and board-to-wire with compatible mating components |
The WAGO 231-643/019-000 is a 13-pole male pluggable electrical connector used for industrial wiring, automation equipment, machinery and electrical control systems. It features CAGE CLAMP® spring pressure termination and a mounting flange with clamping collar for mechanically supported installations.
The connector has 13 poles with a nominal 5.08 mm contact pitch, providing thirteen independent conductor connection positions within one pluggable connector assembly.
The connector has an IEC rated current of 12 A. Its IEC rated voltage is 320 V for overvoltage category III and 630 V for overvoltage category II, pollution degree 2. The applicable rating depends on the installation conditions, selected mating connector and relevant electrical standards.
The WAGO 231-643/019-000 accepts solid and fine-stranded conductors from 0.08–2.5 mm² (28–12 AWG). Fine-stranded conductors with insulated ferrules are supported from 0.25–1.5 mm², while uninsulated ferrules can be used from 0.25–2.5 mm². The specified stripping length is 8–9 mm.
Both products are 13-pole male pluggable connectors from the WAGO MCS MIDI Classic 231 Series. The standard WAGO 231-643 is a free-hanging connector without an integrated mounting flange, while the 231-643/019-000 incorporates fixing flanges and a clamping collar for panel and feed-through mounting applications.
WAGO MCS MIDI Classic connectors provide dependable electrical interconnection solutions for industrial automation, machine building and control equipment. The WAGO 231-643/019-000 combines thirteen connection positions, proven CAGE CLAMP® spring pressure termination and an integrated mounting flange with clamping collar to support efficient wiring, secure mechanical installation and serviceable industrial electrical assemblies.
We use cookies
We use essential cookies to run this site, your basket and checkout. With your permission we'd also like to use analytics and advertising cookies to understand how the site is used and to measure our adverts.