Standard delivery
£8 ex VAT · free over £200UK parcel delivery is £8 ex VAT, or free on orders over £200 ex VAT.
Heavier items may be charged at a weight-based or pallet rate, shown at checkout.
£6.38
The WAGO 231-642/019-000/035-000 is a 12-pole, 1-conductor male pluggable connector from WAGO's 231 Series MCS MIDI Classic range. Designed for industrial electrical interconnections, it belongs to a connector family featuring 5.08 mm contact spacing and proven CAGE CLAMP® spring pressure connection technology for reliable, screwless conductor termination.
The corresponding WAGO 231-642/019-000 configuration incorporates a mounting flange with clamping collar, providing a practical solution for equipment installations requiring additional mechanical support. Its twelve connection positions make the connector particularly useful for industrial control systems, modular machinery, cable harnesses and electrical assemblies where multiple circuits must be connected through one detachable interface.
The complete part number includes the additional /035-000 variant suffix. Although the product is identified as a 1-conductor male connector, the precise effect of this additional suffix has not been independently confirmed. The electrical ratings, conductor limits and any variant-specific mechanical or material characteristics should therefore be checked against WAGO's documentation for 231-642/019-000/035-000 before final equipment design.
The WAGO 231-642/019-000/035-000 belongs to the MCS MIDI Classic connector family, which uses CAGE CLAMP® spring pressure termination to secure electrical conductors without conventional screw terminals. In the corresponding standard connector configuration, an operating tool opens the spring clamp so that a prepared conductor can be inserted and retained when the clamp is released.
The 12-pole arrangement provides twelve separate electrical connection positions at a nominal 5.08 mm pitch. This makes the connector family suitable for applications requiring multiple control, signal or appropriately rated power circuits through one organised, detachable interface.
The /019-000 configuration is associated with a mounting flange and clamping collar. These features provide a means of mechanically supporting the connector at a suitable equipment mounting location, rather than relying solely on attached conductors. The correct mounting method and dimensional clearances should be established using WAGO's installation drawing.
The additional /035-000 suffix distinguishes this connector from the standard 231-642/019-000 product. Because the precise characteristics of this suffix have not been independently verified, it should not be assumed that every electrical, material or dimensional specification of the standard version applies unchanged to the complete variant.
The WAGO MCS MIDI Classic system supports modular electrical connections when used with compatible mating components. The mating connector must be selected according to pole count, contact pitch, mechanical configuration, coding and any variant-specific features. The connector system is not intended for load-breaking operation; mating and unmating should only take place under the conditions permitted by WAGO, and equipment must prevent accessible male contacts from remaining energised when disconnected.
| Manufacturer | WAGO |
|---|---|
| Manufacturer part number | 231-642/019-000/035-000 |
| Product family | MCS MIDI Classic |
| Series | 231 Series |
| Product category | Industrial pluggable electrical connector |
| Connector type | Male connector |
| Connector configuration | 1-conductor male connector |
| Number of poles | 12 |
| Nominal contact pitch | 5.08 mm |
| Base connection technology | CAGE CLAMP® spring pressure connection |
| Base conductor capacity | Up to 2.5 mm² |
| Base conductor size | 28–12 AWG |
| Base connector rated current | 12 A IEC |
| Mounting configuration | Mounting flange with clamping collar, based on the /019-000 version |
| Connector arrangement | Pluggable connection with compatible mating component |
| Primary variant designation | /019-000 |
| Additional variant suffix | /035-000 |
| Variant-specific electrical ratings | Manufacturer confirmation required |
| Variant-specific conductor range | Manufacturer confirmation required |
| Variant-specific stripping length | Manufacturer confirmation required |
| Variant-specific overall dimensions | Refer to the manufacturer's drawing for the complete part number |
| Variant-specific contact plating | Manufacturer confirmation required |
| Variant-specific housing colour | Manufacturer confirmation required |
| Variant-specific material properties | Manufacturer confirmation required |
| Mating compatibility | Verify pole count, pitch, coding and mechanical arrangement |
| Manufacturer documentation | Confirm the full 231-642/019-000/035-000 designation before specifying electrical or mechanical limits |
The WAGO 231-642/019-000/035-000 is a 12-pole male pluggable electrical connector intended for industrial wiring and equipment interconnections. It can be used in automation cabinets, modular machinery and electrical control equipment when paired with compatible mating components and installed according to its complete manufacturer specification.
The connector has 12 poles with a nominal 5.08 mm contact pitch, providing twelve separate electrical connection positions within one pluggable connector assembly.
The part number incorporates the /019-000 mounting-flange configuration, which is associated with a clamping collar. The exact mounting dimensions and any mechanical differences introduced by the /035-000 suffix should be confirmed using documentation for the complete part number.
The /035-000 suffix identifies a specific variant of the WAGO 231-642/019-000 connector. Its precise effect on construction, materials or technical specifications has not been independently confirmed. The full manufacturer part number should therefore be checked before assuming that the product is identical to the standard /019-000 version.
The corresponding standard WAGO 231-642/019-000 connector is specified with an IEC rated current of 12 A and conductor compatibility up to 2.5 mm². However, these values have not been independently confirmed for the complete 231-642/019-000/035-000 variant and should be verified against its specific WAGO documentation before use.
WAGO MCS MIDI Classic connectors provide practical electrical interconnection solutions for industrial automation, machine building and electrical control equipment. The WAGO 231-642/019-000/035-000 offers a 12-pole male connector arrangement within the established 5.08 mm pitch 231 Series, with a mounting-flange configuration associated with CAGE CLAMP® spring pressure termination. Correct variant identification and mating-component selection help ensure dependable integration into industrial electrical assemblies.
We use cookies
We use essential cookies to run this site, your basket and checkout. With your permission we'd also like to use analytics and advertising cookies to understand how the site is used and to measure our adverts.