Standard delivery
£8 ex VAT · free over £200UK parcel delivery is £8 ex VAT, or free on orders over £200 ex VAT.
Heavier items may be charged at a weight-based or pallet rate, shown at checkout.
£3.98
The WAGO 231-642/017-000 is a high-quality 12-pole PCB terminal block designed for dependable electrical connections in industrial automation, electronic control systems and printed circuit board assemblies. Part of the established WAGO 231 Series MCS MIDI Classic range, this connector features CAGE CLAMP® spring pressure connection technology, providing secure, screwless conductor termination for professional electrical installations.
Designed for applications requiring multiple electrical connections in a compact assembly, the WAGO 231-642/017-000 combines through-hole PCB solder mounting with integrated mounting flanges for secure mechanical installation. Its feed-through design allows convenient connection of external wiring to PCB-mounted equipment, with installation options that can accommodate flush-mounted or protruding arrangements within suitable enclosures.
Featuring 12 independent connection positions, a 5.08 mm contact pitch and an IEC rated current of 16 A, this terminal block is suitable for a wide range of industrial electrical circuits. It accepts solid and fine-stranded conductors from 0.08–2.5 mm², while its durable orange polyamide housing and spring pressure contacts provide a practical solution for control panels, industrial electronics and OEM machinery.
The WAGO 231-642/017-000 is engineered for industrial electronic equipment requiring dependable connections between external conductors and printed circuit boards. Its CAGE CLAMP® spring pressure system secures conductors using a spring mechanism rather than conventional terminal screws, helping maintain consistent contact pressure throughout normal operation.
The 12-pole configuration provides twelve separate electrical connection points within a single compact terminal strip. This makes the connector suitable for multi-circuit control wiring, automation modules and industrial electronic assemblies where orderly conductor termination and efficient PCB space utilisation are important.
Its through-hole solder pins provide permanent electrical connections to the PCB, while the integrated mounting flanges allow additional mechanical support. The feed-through arrangement can be incorporated into suitable enclosure designs, allowing wiring connections to be accessed from the exterior of an equipment panel while the soldered PCB connections remain within the assembly.
The 5.08 mm contact pitch and 16 A IEC current rating make the terminal block suitable for a range of appropriately designed control and power circuits. Its spring pressure connections accommodate both solid and fine-stranded copper conductors, supporting flexibility during equipment manufacturing, installation and servicing.
For reliable operation, conductor cross-sections, ferrules, PCB copper tracks, solder joints and installation conditions must be selected in accordance with the applicable electrical ratings. The connector's material temperature limits should not be interpreted as an unrestricted continuous operating temperature rating for the complete electrical assembly.
Tick the specs you need, then view products that match.
| Current | 16 A | |
|---|---|---|
| Voltage | 320 V | |
| Product Series | WAGO 231 | |
| Rated surge voltage | 4 kV | |
| Number of plug-in contact rows | 1 | |
| Flammability class of insulation material according to UL 94 | V0 | |
| Operating temperature | -60 – 105 °C | |
| Rated current In | 16 A | |
| Material insulation body | Thermoplastic | |
| Housing colour | Orange | |
| Modular spacing contacts | 5.08 mm | |
| Angle PCB/contact | Other | |
| Contact type | Pin | |
| Type of electric connection | Soldering connection | |
| Type of fastening | Solder | |
| Type of connection | Flexible PCB-connector | |
| Length pin | 4.7 mm | |
| Modular spacing connections | 5.08 mm | |
| Number of poles | 12 | |
| Connector model | Free connector | |
| Suitable for PCB thickness | 1.5 mm | |
| Rated voltage | 320 V | |
| Material of contact surface | Tin | |
| Pollution degree | 2 | |
| Overvoltage category | III | |
| Type of PCB fastening | Connecting contact | |
| Manufacturer | WAGO | |
| Series | 231 Series / MCS MIDI Classic | |
| Manufacturer part number | 231-642/017-000 | |
| Product type | PCB terminal block with clamping collar | |
| Connector configuration | Feed-through PCB terminal strip | |
| Number of connection points | 12 | |
| Number of potentials | 12 | |
| Number of rows | 1 | |
| Number of levels | 1 | |
| Contact pitch | 5.08 mm | |
| Rated current (IEC) | 16 A | |
| Rated voltage (IEC, III/3) | 320 V | |
| Rated voltage (IEC, III/2) | 320 V | |
| Rated voltage (IEC, II/2) | 630 V | |
| Rated impulse voltage | 4 kV | |
| Rated current (UL 1059, use group B) | 15 A | |
| Rated voltage (UL 1059, use group B) | 300 V | |
| Rated current (UL 1059, use group C) | 15 A | |
| Rated voltage (UL 1059, use group C) | 150 V | |
| Rated current (UL 1059, use group D) | 10 A | |
| Rated voltage (UL 1059, use group D) | 300 V | |
| Connection technology | CAGE CLAMP® | |
| Termination method | Screwless spring pressure clamp | |
| Actuation method | Operating tool / screwdriver | |
| Solid conductor cross-section | 0.08–2.5 mm² | |
| Fine-stranded conductor cross-section | 0.08–2.5 mm² | |
| Conductor size | 28–14 AWG | |
| Fine-stranded conductor with insulated ferrule | 0.25–1.5 mm² | |
| Fine-stranded conductor with uninsulated ferrule | 0.25–2.5 mm² | |
| Conductor stripping length | 8–9 mm | |
| PCB connection type | Through-hole technology (THT) | |
| Solder pin arrangement | In-line across the terminal strip | |
| Number of solder pins per potential | 1 | |
| Solder pin dimensions | 0.8 × 1.3 mm | |
| Solder pin length | 4.7 mm | |
| Mounting type | Integrated mounting flanges | |
| Installation arrangement | PCB mounting / panel mounting / feed-through mounting | |
| Width | 76.16 mm | |
| Height | 19 mm | |
| Height above mounting surface | 14.3 mm | |
| Depth | 19.1 mm | |
| Dimensions (H × W × D) | 19 × 76.16 × 19.1 mm | |
| Approximate weight | 16.94 g | |
| Contact material | Electrolytic copper | |
| Contact plating | Tin | |
| Clamping spring material | Chrome-nickel spring steel | |
| Insulating material | Polyamide 66 (PA66) | |
| Flammability classification | UL 94 V-0 | |
| Material temperature limits | −60 to +105 °C | |
| Material group | I | |
| Applicable standards | IEC/EN 60664-1, UL 1059 | |
| Country of origin | Germany | |
| GTIN | 4044918283281 |
The WAGO 231-642/017-000 is a 12-pole PCB terminal block designed to connect electrical conductors to printed circuit boards in industrial automation, control panels and electronic equipment. Its integrated mounting flanges also support suitable panel and feed-through installations.
The connector provides 12 independent electrical connection positions arranged in a single row with a 5.08 mm contact pitch.
The terminal block has an IEC rated current of 16 A. Under UL 1059 specifications, it is rated at 15 A for use groups B and C, and 10 A for use group D, subject to the applicable installation conditions.
The connector is rated at 320 V under IEC overvoltage category III and 630 V under overvoltage category II, pollution degree 2. The appropriate operating voltage depends on the installation environment and applicable electrical standard.
The terminal block accepts solid and fine-stranded copper conductors from 0.08–2.5 mm² (28–14 AWG). Fine-stranded conductors with insulated ferrules are supported from 0.25–1.5 mm², while those with uninsulated ferrules are supported from 0.25–2.5 mm².
No. The connector uses WAGO CAGE CLAMP® spring pressure connection technology, allowing conductors to be secured without conventional terminal screws. A suitable operating tool is used to open the clamp during conductor insertion or removal.
The terminal block uses through-hole solder pins for electrical connection to the PCB and includes integrated mounting flanges for additional mechanical support. It is suitable for appropriately designed PCB, panel and feed-through mounting arrangements.
The connector measures 76.16 mm wide, 19 mm high and 19.1 mm deep. Its height above the mounting surface is 14.3 mm, and its approximate weight is 16.94 g.
The connector features an orange polyamide 66 insulating housing, tin-plated electrolytic copper contacts and chrome-nickel spring steel clamping components. Its insulating material has a UL 94 V-0 flammability classification.
The WAGO 231-642/017-000 is a PCB terminal block with solder pins and mounting flanges, designed for a permanent soldered connection to a printed circuit board. A standard pluggable connector instead mates with a separate compatible connector component and can be disconnected after the electrical circuit has been safely isolated.
WAGO 231 Series PCB terminal blocks provide electrical engineers, industrial automation specialists and OEM equipment manufacturers with dependable CAGE CLAMP® connection technology, secure PCB mounting and efficient conductor termination for modern industrial control systems and electronic equipment.
We use cookies
We use essential cookies to run this site, your basket and checkout. With your permission we'd also like to use analytics and advertising cookies to understand how the site is used and to measure our adverts.