Standard delivery
£8 ex VAT · free over £200UK parcel delivery is £8 ex VAT, or free on orders over £200 ex VAT.
Heavier items may be charged at a weight-based or pallet rate, shown at checkout.
£5.02
The WAGO 231-641 is an 11-pole male pluggable electrical connector from the WAGO MCS MIDI Classic 231 Series. Designed for industrial automation, machine building and electrical control systems, this orange connector features a 5.08 mm contact pitch and WAGO's established CAGE CLAMP® spring pressure connection technology for secure, screwless conductor termination.
With eleven independent conductor connection positions, the WAGO 231-641 provides a compact and organised interface for modular wiring systems, cable harnesses and industrial equipment. Its spring clamp mechanism accommodates solid and fine-stranded conductors, while vertical and horizontal clamp actuation helps simplify conductor installation in different wiring arrangements.
The connector has an IEC rated current of 12 A and supports conductors from 0.08–2.5 mm². It is suitable for wire-to-wire and board-to-wire connections when paired with correctly matched WAGO mating components. The standard 231-641 version has no integrated locking flange or mounting feet, making it particularly useful for free-hanging cable assemblies and modular electrical interconnections.
The WAGO 231-641 uses CAGE CLAMP® spring pressure technology to provide dependable electrical contact without conventional screw tightening. An appropriate operating tool opens the clamp so that a prepared conductor can be inserted. Releasing the mechanism secures the conductor within the spring connection.
The 11-pole configuration provides eleven independent electrical connection positions with a nominal 5.08 mm pitch. This enables multiple control, signal or appropriately rated power circuits to be organised within one pluggable connector assembly.
WAGO's vertical and horizontal CAGE CLAMP® actuation arrangement supports convenient cable preparation and wiring access. The connector can be used in modular industrial equipment where pre-assembled wiring harnesses simplify installation, servicing or equipment replacement.
The standard 231-641 does not include mounting feet or a locking flange. Other 231 Series variants offer alternative mounting arrangements, but those should be selected using their own manufacturer part numbers rather than assumed to be interchangeable.
The MCS MIDI Classic system requires a compatible mating component with the correct pole count, contact pitch and mechanical configuration. The connector is not designed for load-breaking operation; mating and unmating must follow the manufacturer's safety instructions, and accessible male contacts must not remain energised when disconnected.
Tick the specs you need, then view products that match.
| Current | 12 A | |
|---|---|---|
| Voltage | 320 V | |
| Product Series | WAGO 231 | |
| Rated surge voltage | 4 kV | |
| Number of plug-in contact rows | 1 | |
| Connectable cable type | Tubular cable | |
| Flammability class of insulation material according to UL 94 | V0 | |
| Operating temperature | -60 – 100 °C | |
| Rated current In | 12 A | |
| Connectable conductor cross section fine-strand without cable end sleeve | 0.08 – 2.5 mm² | |
| Degree of protection (IP), mounted | IP10 | |
| Material insulation body | Thermoplastic | |
| Coating housing | Uncoated | |
| Connectable conductor cross section multi-wired | 0.08 – 2.5 mm² | |
| Housing colour | Orange | |
| Modular spacing contacts | 5.08 mm | |
| Angle contact/conductor connection | 180° (horizontal) | |
| Contact type | Pin | |
| Material contact | Other copper alloys | |
| Type of electric connection | Spring clamp connection | |
| Housing material | Plastic | |
| Type of connection | Printed circuit board to cable | |
| Connectable conductor cross section fine-strand with cable end sleeve | 0.25 – 1.5 mm² | |
| Modular spacing connections | 5.08 mm | |
| Number of poles | 11 | |
| Material of contact surface | Tin | |
| Rated voltage | 320 V | |
| Pollution degree | 2 | |
| Connectable conductor cross section solid-core | 0.08 – 2.5 mm² | |
| Overvoltage category | III | |
| Manufacturer | WAGO | |
| Manufacturer part number | 231-641 | |
| Product family | MCS MIDI Classic | |
| Series | 231 | |
| Product type | 1-conductor male pluggable connector | |
| Connector gender | Male | |
| Number of connection positions | 11 | |
| Number of levels | 1 | |
| Contact pitch | 5.08 mm | |
| Connection technology | CAGE CLAMP® | |
| Actuation method | Operating tool | |
| Actuation access | Vertical and horizontal | |
| Rated current (IEC) | 12 A | |
| Conductor cross-section | 0.08–2.5 mm² | |
| Conductor size | 28–12 AWG | |
| Conductor stripping length | 8–9 mm | |
| Nominal housing length | 59 mm, calculated from WAGO's dimensional formula | |
| Housing height | 14.3 mm | |
| Housing depth | 27.5 mm | |
| Mounting type | Free-hanging / in-line | |
| Locking of plug-in connection | None | |
| Contact material | Electrolytic copper | |
| Contact plating | Tin | |
| Insulation material | Polyamide (PA66) | |
| Flammability classification | UL 94 V-0 | |
| Temperature limit range | −60 to +100 °C | |
| Manufacturer standard pack quantity | 25 pieces | |
| Suitable connection arrangements | Wire-to-wire and board-to-wire with compatible mating connectors |
The WAGO 231-641 is an 11-pole male pluggable electrical connector designed for industrial wiring, automation equipment, machinery and modular electrical assemblies. It provides screwless conductor termination through WAGO's CAGE CLAMP® spring pressure connection system.
The connector has 11 poles with a nominal 5.08 mm contact pitch, providing eleven separate conductor connection positions within one pluggable assembly.
The WAGO 231-641 has an IEC rated current of 12 A. The permissible operating current also depends on the selected mating component, conductor size, ambient conditions and applicable installation standards.
The connector accepts solid and fine-stranded conductors from 0.08–2.5 mm², corresponding to a nominal range of 28–12 AWG. The recommended conductor stripping length is 8–9 mm.
The standard WAGO 231-641 is a free-hanging male pluggable connector without an integrated mounting flange or locking mechanism. Related WAGO 231 Series variants offer mounting feet, clamping collars and alternative flange configurations for applications requiring additional mechanical support.
WAGO MCS MIDI Classic connectors provide practical, dependable electrical interconnections for industrial automation, machine building and control equipment. The WAGO 231-641 combines eleven connection positions, a compact 5.08 mm pitch and proven CAGE CLAMP® spring pressure termination to support organised wiring, efficient installation and serviceable industrial electrical assemblies.
We use cookies
We use essential cookies to run this site, your basket and checkout. With your permission we'd also like to use analytics and advertising cookies to understand how the site is used and to measure our adverts.