Standard delivery
£8 ex VAT · free over £200UK parcel delivery is £8 ex VAT, or free on orders over £200 ex VAT.
Heavier items may be charged at a weight-based or pallet rate, shown at checkout.
£3.71
The WAGO 231-641/023-000 is an 11-pole through-panel PCB terminal block from the WAGO 231 Series, designed to provide reliable wire-to-board electrical connections in industrial automation, electronic control equipment and machinery. Featuring CAGE CLAMP® spring pressure termination, angled through-hole solder contacts and integrated mounting flanges, this terminal block combines secure conductor connections with mechanically supported PCB installation.
With a 5.08 mm pin spacing, 16 A IEC rated current and conductor capacity of 0.08–2.5 mm², the WAGO 231-641/023-000 supports compact, organised connections between external wiring and printed circuit boards. Its eleven independent connection points enable multiple circuits to be terminated within a single component, reducing wiring complexity in industrial electronic assemblies.
The angled solder pins provide horizontal wire entry relative to the PCB, while the mounting flanges support secure panel and feed-through installation. The terminal block features an orange polyamide 66 housing, tin-plated electrolytic copper contacts and chrome-nickel spring steel clamping elements. Its 71.08 × 19 × 19.1 mm dimensions make it suitable for equipment requiring a compact, robust and serviceable PCB wiring interface.
The WAGO 231-641/023-000 is designed for reliable electrical connections between external conductors and printed circuit boards. Its CAGE CLAMP® spring pressure terminals maintain consistent contact force without conventional terminal screws, while the through-hole solder pins establish permanent electrical connections to the PCB. The eleven-pole arrangement provides an efficient way to organise multiple industrial control and electrical circuits within a single terminal strip.
The integrated mounting flanges provide additional mechanical support for flush-mounted panel and feed-through installations, helping reduce mechanical stress on soldered connections when the terminal block is correctly installed. Its angled configuration supports horizontal wire entry, making it suitable for control boards, industrial electronic modules and OEM equipment. Installation must follow the manufacturer's PCB layout, soldering and electrical rating requirements, with all wiring work carried out on safely isolated circuits.
Tick the specs you need, then view products that match.
| Current | 16 A | |
|---|---|---|
| Voltage | 320 V | |
| Product Series | WAGO 231 | |
| Rated surge voltage | 4 kV | |
| Number of plug-in contact rows | 1 | |
| Flammability class of insulation material according to UL 94 | V0 | |
| Operating temperature | -60 – 105 °C | |
| Rated current In | 16 A | |
| Material insulation body | Thermoplastic | |
| Housing colour | Orange | |
| Modular spacing contacts | 5.08 mm | |
| Angle PCB/contact | Other | |
| Contact type | Pin | |
| Type of electric connection | Soldering connection | |
| Type of fastening | Solder | |
| Type of connection | Flexible PCB-connector | |
| Length pin | 4.7 mm | |
| Modular spacing connections | 5.08 mm | |
| Number of poles | 11 | |
| Connector model | Free connector | |
| Suitable for PCB thickness | 1.5 mm | |
| Rated voltage | 320 V | |
| Material of contact surface | Tin | |
| Pollution degree | 2 | |
| Overvoltage category | III | |
| Type of PCB fastening | Connecting contact | |
| Manufacturer | WAGO | |
| Part number | 231-641/023-000 | |
| Series | 231 | |
| Product group | Multi Connection System (MCS) | |
| Product type | Through-panel PCB terminal block | |
| Terminal configuration | Angled solder pin terminal strip with mounting flanges | |
| Number of conductor connection points | 11 | |
| Number of electrical potentials | 11 | |
| Number of connection types | 1 | |
| Number of levels | 1 | |
| Pin spacing | 5.08 mm | |
| Connection technology | CAGE CLAMP® | |
| Termination method | Screwless spring pressure clamp | |
| Actuation type | Operating tool | |
| Rated current (IEC) | 16 A | |
| Rated voltage (IEC, III/3) | 320 V | |
| Rated voltage (IEC, III/2) | 320 V | |
| Rated voltage (IEC, II/2) | 630 V | |
| Rated impulse voltage | 4 kV | |
| Rated voltage (UL 1059, Use Group B) | 300 V | |
| Rated current (UL 1059, Use Group B) | 15 A | |
| Rated voltage (UL 1059, Use Group C) | 150 V | |
| Rated current (UL 1059, Use Group C) | 15 A | |
| Rated voltage (UL 1059, Use Group D) | 300 V | |
| Rated current (UL 1059, Use Group D) | 10 A | |
| Solid conductor cross-section | 0.08–2.5 mm² | |
| Fine-stranded conductor cross-section | 0.08–2.5 mm² | |
| Conductor size | 28–14 AWG | |
| Fine-stranded conductor with insulated ferrule | 0.25–1.5 mm² | |
| Fine-stranded conductor with uninsulated ferrule | 0.25–2.5 mm² | |
| Conductor stripping length | 8–9 mm | |
| PCB contact technology | Through-hole technology (THT) | |
| PCB contact arrangement | Angled solder pins | |
| Number of solder pins per potential | 1 | |
| Solder pin arrangement | Single in-line row | |
| Solder pin dimensions | 0.8 × 1.3 mm | |
| Solder pin length | 4.7 mm | |
| PCB drilled hole diameter | 1.8 mm (+0.1 mm tolerance) | |
| Mounting type | Mounting flange | |
| Mounting applications | Panel mounting / feed-through mounting | |
| Mounting configuration | Flush mounting | |
| Compatible panel sheet thickness | 1.5 mm | |
| Contact material | Electrolytic copper | |
| Contact plating | Tin-plated | |
| Clamping spring material | Chrome-nickel spring steel | |
| Insulating material | Polyamide 66 (PA66) | |
| Flammability classification | UL94 V-0 | |
| Material group | I | |
| Temperature limit range | −60 to +105 °C | |
| Width | 71.08 mm | |
| Height | 19 mm | |
| Depth | 19.1 mm | |
| Height from mounting surface | 14.3 mm | |
| Dimensions (W × H × D) | 71.08 × 19 × 19.1 mm | |
| Weight | Approximately 15.642 g | |
| Fire load | 0.243 MJ | |
| GTIN / EAN | 4044918283274 | |
| Country of origin | Germany | |
| Applicable electrical rating standard | IEC/EN 60664-1 |
The WAGO 231-641/023-000 is an eleven-pole through-panel PCB terminal block used to connect external copper conductors to printed circuit boards in industrial automation, control panels and electronic equipment.
The terminal block has 11 poles, providing eleven separate conductor connection points and eleven electrical potentials.
The terminal block has a 16 A IEC rated current. Its IEC rated voltage is 320 V under overvoltage category III conditions or 630 V under overvoltage category II, pollution degree 2 conditions.
It accepts solid and fine-stranded copper conductors from 0.08–2.5 mm², corresponding to 28–14 AWG, with an 8–9 mm conductor stripping length.
The terminal block has a 5.08 mm pin spacing, providing compact connections for eleven electrical circuits on a printed circuit board.
The terminal block uses through-hole solder contacts for PCB installation and incorporates mounting flanges for mechanically supported panel and feed-through mounting. Its angled solder pins are 4.7 mm long.
The terminal block measures 71.08 mm wide, 19 mm high and 19.1 mm deep, with a height of 14.3 mm from the mounting surface.
WAGO PCB terminal blocks are specified by electrical engineers, industrial automation specialists and equipment manufacturers for dependable wire-to-board connections. The WAGO 231-641/023-000 combines eleven-pole connectivity, a 16 A IEC rated current, CAGE CLAMP® spring pressure technology, angled through-hole solder pins and integrated mounting flanges to provide a reliable connection solution for industrial control boards and electronic equipment.
We use cookies
We use essential cookies to run this site, your basket and checkout. With your permission we'd also like to use analytics and advertising cookies to understand how the site is used and to measure our adverts.