Standard delivery
£8 ex VAT · free over £200UK parcel delivery is £8 ex VAT, or free on orders over £200 ex VAT.
Heavier items may be charged at a weight-based or pallet rate, shown at checkout.
£4.60
The WAGO 231-640 is a reliable 10-pole male pluggable electrical connector from the WAGO 231 Series MCS MIDI Classic range. Designed for industrial automation, machine building and electrical control equipment, this connector combines a compact 5.08 mm contact pitch with WAGO's proven CAGE CLAMP® spring pressure connection technology for secure, screwless conductor termination.
Featuring ten independent conductor connection points, the WAGO 231-640 provides a practical solution for modular electrical equipment, pre-assembled cable harnesses and detachable industrial wiring. Its spring pressure connection system accommodates solid and fine-stranded conductors, while parallel and perpendicular CAGE CLAMP® actuation provides convenient installation access.
With an IEC rated current of 12 A, rated voltages of 320 V or 630 V depending on installation conditions, and conductor compatibility up to 2.5 mm², this orange 10-pole connector is suitable for a wide range of industrial electrical applications. Its compact dimensions of 53.4 × 14.3 × 27.5 mm make it useful where multiple circuits must be connected through a single detachable interface.
The WAGO 231-640 combines the flexibility of a detachable electrical connector with the reliability of WAGO's established CAGE CLAMP® spring pressure connection technology. Its spring clamping mechanism retains conductors without conventional screw terminals, supporting consistent electrical contact and efficient installation in industrial wiring systems.
The 10-pole configuration with 5.08 mm contact spacing allows ten independent circuits to be connected through one compact interface. This makes the connector particularly useful in industrial equipment requiring multiple control, signal or appropriately rated power connections within a modular wiring assembly.
The connector supports operation of the clamping mechanism both parallel and perpendicular to conductor entry. This dual-access arrangement simplifies cable preparation and on-unit wiring, particularly where installation space or conductor access is restricted.
The standard WAGO 231-640 is a male pluggable connector without integrated mounting feet or a mounting flange. Related versions in the 231 Series are available with snap-in mounting feet, clamping collars, threaded flanges and snap-in flanges for applications requiring dedicated mechanical mounting.
As part of the WAGO MCS MIDI Classic connector system, the 231-640 can be paired with correctly matched female mating components for wire-to-wire and board-to-wire connections. The connector is not a load-break device and must not be connected or disconnected while live or under load. Electrical installations should also prevent accessible male contacts from remaining energised when unmated.
Tick the specs you need, then view products that match.
| Current | 12 A | |
|---|---|---|
| Voltage | 320 V | |
| Product Series | WAGO 231 | |
| Rated surge voltage | 4 kV | |
| Number of plug-in contact rows | 1 | |
| Connectable cable type | Tubular cable | |
| Flammability class of insulation material according to UL 94 | V0 | |
| Operating temperature | -60 – 100 °C | |
| Rated current In | 12 A | |
| Connectable conductor cross section fine-strand without cable end sleeve | 0.08 – 2.5 mm² | |
| Degree of protection (IP), mounted | IP10 | |
| Material insulation body | Thermoplastic | |
| Coating housing | Uncoated | |
| Connectable conductor cross section multi-wired | 0.08 – 2.5 mm² | |
| Housing colour | Orange | |
| Modular spacing contacts | 5.08 mm | |
| Angle contact/conductor connection | 180° (horizontal) | |
| Contact type | Pin | |
| Material contact | Other copper alloys | |
| Type of electric connection | Spring clamp connection | |
| Housing material | Plastic | |
| Type of connection | Printed circuit board to cable | |
| Connectable conductor cross section fine-strand with cable end sleeve | 0.25 – 1.5 mm² | |
| Modular spacing connections | 5.08 mm | |
| Number of poles | 10 | |
| Material of contact surface | Tin | |
| Rated voltage | 320 V | |
| Pollution degree | 2 | |
| Connectable conductor cross section solid-core | 0.08 – 2.5 mm² | |
| Overvoltage category | III | |
| Manufacturer | WAGO | |
| Series | 231 Series – MCS MIDI Classic | |
| Manufacturer part number | 231-640 | |
| Product type | Pluggable male electrical connector | |
| Connector configuration | 1-conductor male connector | |
| Number of clamping units | 10 | |
| Number of potentials | 10 | |
| Number of levels | 1 | |
| Number of connection types | 1 | |
| Contact pitch | 5.08 mm | |
| Connector gender | Male | |
| Connection technology | CAGE CLAMP® spring pressure connection | |
| Actuation method | Operating tool | |
| Actuation directions | Parallel and perpendicular to conductor entry | |
| Mounting arrangement | Standard free-hanging connector without integrated mounting feet or flange | |
| Locking of plug-in connection | None | |
| Rated current (IEC) | 12 A | |
| Rated voltage (IEC, III/3) | 320 V | |
| Rated voltage (IEC, III/2) | 320 V | |
| Rated voltage (IEC, II/2) | 630 V | |
| Rated impulse voltage (IEC) | 4 kV | |
| Rated voltage (UL 1977) | 600 V | |
| Rated current (UL 1977) | 15 A | |
| Solid conductor cross-section | 0.08–2.5 mm² | |
| Fine-stranded conductor cross-section | 0.08–2.5 mm² | |
| Conductor size | 28–12 AWG | |
| Fine-stranded conductor with insulated ferrule | 0.25–1.5 mm² | |
| Fine-stranded conductor with uninsulated ferrule | 0.25–2.5 mm² | |
| Conductor stripping length | 8–9 mm | |
| Width | 53.4 mm | |
| Height | 14.3 mm | |
| Depth | 27.5 mm | |
| Weight | Approximately 15.4 g | |
| Conductor entry direction relative to mating direction | 0° | |
| Variable coding | Yes | |
| Anti-rotation protection | Yes | |
| Mismating protection | No | |
| Contact material | Electrolytic copper | |
| Contact plating | Tin | |
| Clamping spring material | Chrome-nickel spring steel | |
| Insulation material | Polyamide 66 (PA66) | |
| Flammability classification | UL 94 V-0 | |
| Material group | I | |
| Temperature limit range | −60 to +100 °C | |
| Processing temperature range | −35 to +60 °C | |
| RoHS compliance | Compliant, without exemption | |
| Country of origin | Germany | |
| GTIN | 4044918260558 | |
| Manufacturer standard pack quantity | 50 pieces |
The WAGO 231-640 is a 10-pole male pluggable electrical connector used for reliable electrical interconnections in industrial control panels, automation equipment and machinery. Its CAGE CLAMP® spring pressure termination system provides secure conductor connections without conventional screw terminals.
The connector features 10 poles with 5.08 mm contact spacing, providing ten independent conductor connection points within a compact pluggable connector assembly.
The WAGO 231-640 has an IEC rated current of 12 A. Its IEC rated voltage is 320 V for overvoltage category III and 630 V for overvoltage category II, pollution degree 2. The applicable rating depends on the installation conditions and relevant electrical standards.
The connector supports solid and fine-stranded conductors from 0.08–2.5 mm² (28–12 AWG). Fine-stranded conductors with insulated ferrules are supported from 0.25–1.5 mm², while uninsulated ferrules can be used from 0.25–2.5 mm². The specified conductor stripping length is 8–9 mm.
The standard WAGO 231-640 is a male pluggable connector without integrated mounting feet or a mounting flange. Related versions, including 231-640/018-000, 231-640/019-000 and 231-640/109-000, provide alternative mechanical mounting or locking arrangements for specific installation requirements.
WAGO 231 Series MCS MIDI Classic connectors provide dependable electrical interconnection solutions for industrial automation, machine building and electrical control systems. The WAGO 231-640 combines compact 10-pole construction, proven CAGE CLAMP® spring pressure termination and a practical pluggable interface to support efficient wiring, reliable operation and straightforward maintenance in industrial electrical equipment.
We use cookies
We use essential cookies to run this site, your basket and checkout. With your permission we'd also like to use analytics and advertising cookies to understand how the site is used and to measure our adverts.