Standard delivery
£8 ex VAT · free over £200UK parcel delivery is £8 ex VAT, or free on orders over £200 ex VAT.
Heavier items may be charged at a weight-based or pallet rate, shown at checkout.
£4.60
The WAGO 231-640/018-000 is a robust and reliable 10-pole male pluggable connector with CAGE CLAMP® spring pressure connection technology, designed for secure electrical connections in industrial automation, control panels and machinery. As part of the established WAGO 231 Series MCS MIDI Classic connector range, it provides a compact and practical solution for modular electrical wiring and dependable conductor termination.
Featuring integrated snap-in mounting feet, this connector is designed for convenient installation on suitable DIN-35 mounting rails and electrical panels. WAGO's proven CAGE CLAMP® technology allows solid and fine-stranded conductors to be connected without conventional terminal screws, while vertical and horizontal clamp actuation simplifies cable pre-assembly, installation and maintenance.
With a 12 A IEC rated current, 5.08 mm contact pitch and support for conductor cross-sections from 0.08–2.5 mm², the WAGO 231-640/018-000 is suitable for a wide range of industrial control and electrical connection applications. Its 10-pole configuration, orange polyamide housing and snap-in mounting design make it particularly useful for control cabinets, automation equipment and OEM machinery.
The WAGO 231-640/018-000 combines convenient modular connectivity with WAGO's established CAGE CLAMP® spring pressure connection system. This technology secures electrical conductors using a spring mechanism rather than conventional terminal screws, helping maintain consistent contact pressure and reducing the maintenance requirements associated with screw-type connections.
The connector provides 10 independent conductor connection positions, allowing multiple electrical circuits to be connected in a compact arrangement. Its support for solid and fine-stranded copper conductors makes it suitable for industrial control wiring, machine manufacturing and electrical cabinet assembly where flexible conductor selection and efficient installation are important.
Unlike PCB terminal blocks with permanent solder connections, the WAGO 231-640/018-000 is a pluggable male connector with integrated snap-in mounting feet. This arrangement enables secure mechanical installation on compatible DIN-35 mounting rails or electrical panels while allowing the connector to mate with suitable WAGO MCS MIDI Classic components.
The connector's 5.08 mm pitch, robust insulating housing and tin-plated contacts provide a practical solution for modular industrial electrical connections. Its vertical and horizontal CAGE CLAMP® actuation supports convenient conductor installation during equipment assembly and maintenance.
The WAGO MCS system includes connectors without breaking capacity in accordance with IEC/EN 61984. These connectors must not be connected or disconnected while live or under load. Electrical equipment should be safely isolated before mating or unmating, and the circuit design should prevent accessible connector pins from remaining energised when disconnected.
Tick the specs you need, then view products that match.
| Current | 12 A | |
|---|---|---|
| Voltage | 320 V | |
| Product Series | WAGO 231 | |
| Rated surge voltage | 4 kV | |
| Number of plug-in contact rows | 1 | |
| Connectable cable type | Tubular cable | |
| Flammability class of insulation material according to UL 94 | V0 | |
| Operating temperature | -60 – 100 °C | |
| Rated current In | 12 A | |
| Connectable conductor cross section fine-strand without cable end sleeve | 0.08 – 2.5 mm² | |
| Degree of protection (IP), mounted | IP10 | |
| Material insulation body | Thermoplastic | |
| Coating housing | Uncoated | |
| Connectable conductor cross section multi-wired | 0.08 – 2.5 mm² | |
| Housing colour | Orange | |
| Modular spacing contacts | 5.08 mm | |
| Angle contact/conductor connection | 180° (horizontal) | |
| Contact type | Pin | |
| Material contact | Other copper alloys | |
| Type of electric connection | Spring clamp connection | |
| Housing material | Plastic | |
| Type of connection | Printed circuit board to cable | |
| Connectable conductor cross section fine-strand with cable end sleeve | 0.25 – 1.5 mm² | |
| Modular spacing connections | 5.08 mm | |
| Number of poles | 10 | |
| Material of contact surface | Tin | |
| Rated voltage | 320 V | |
| Pollution degree | 2 | |
| Connectable conductor cross section solid-core | 0.08 – 2.5 mm² | |
| Overvoltage category | III | |
| Manufacturer | WAGO | |
| Series | 231 Series / MCS MIDI Classic | |
| Model | 231-640/018-000 | |
| Product type | Male pluggable terminal block connector | |
| Connector gender | Male | |
| Connector configuration | 1-conductor male connector | |
| Number of connection points | 10 | |
| Number of levels | 1 | |
| Contact pitch | 5.08 mm | |
| Rated current (IEC) | 12 A | |
| Rated voltage (IEC, III/3) | 320 V | |
| Rated voltage (IEC, III/2) | 320 V | |
| Rated voltage (IEC, II/2) | 630 V | |
| Rated impulse voltage | 4 kV | |
| Rated current (UL 1059, use group B) | 15 A | |
| Rated voltage (UL 1059, use group B) | 300 V | |
| Rated current (UL 1059, use group D) | 10 A | |
| Rated voltage (UL 1059, use group D) | 300 V | |
| Rated current (UL 1977) | 15 A | |
| Rated voltage (UL 1977) | 600 V | |
| Connection technology | CAGE CLAMP® | |
| Termination method | Screwless spring pressure clamp | |
| Actuation method | Operating tool | |
| Solid conductor cross-section | 0.08–2.5 mm² | |
| Fine-stranded conductor cross-section | 0.08–2.5 mm² | |
| Conductor size | 28–12 AWG | |
| Fine-stranded conductor with insulated ferrule | 0.25–1.5 mm² | |
| Fine-stranded conductor with uninsulated ferrule | 0.25–2.5 mm² | |
| Conductor stripping length | 8–9 mm | |
| Conductor entry direction relative to mating direction | 0° | |
| Mounting type | Snap-in mounting feet | |
| Installation type | DIN-35 rail / panel mounting | |
| Compatible panel thickness | 0.6–1.2 mm | |
| Connection applications | Wire-to-wire and board-to-wire with compatible mating components | |
| Connector locking | Without integrated plug-in locking | |
| Mismating protection | No dedicated mismating protection | |
| Width | 54 mm | |
| Height | 18.8 mm | |
| Height above mounting surface | 14.3 mm | |
| Depth | 27.5 mm | |
| Dimensions (H × W × D) | 18.8 × 54 × 27.5 mm | |
| Contact material | Electrolytic copper | |
| Contact plating | Tin | |
| Clamping spring material | Chrome-nickel spring steel | |
| Insulating material | Polyamide 66 (PA66) | |
| Flammability classification | UL 94 V-0 | |
| Material group | I | |
| Material temperature limits | −60 to +100 °C | |
| Weight | approx. 14.9 g | |
| Packaging unit | 50 pieces | |
| Standards and approvals | IEC/EN 61984, UL 1059, UL 1977 | |
| Country of origin | Germany | |
| GTIN | 4044918260572 |
The WAGO 231-640/018-000 is a 10-pole male pluggable connector designed for secure electrical connections in industrial automation, electrical control panels and machinery. It features CAGE CLAMP® spring pressure termination and integrated snap-in mounting feet.
The connector provides 10 independent electrical connection positions arranged in a single row with a 5.08 mm contact pitch.
The connector has an IEC rated current of 12 A. Under UL 1059 specifications, it is rated at 15 A for use group B and 10 A for use group D. The applicable rating depends on the relevant approval and installation conditions.
The WAGO 231-640/018-000 is rated at 320 V under IEC overvoltage category III and 630 V under overvoltage category II, pollution degree 2. It also has a 600 V UL 1977 rating, subject to the applicable approval conditions.
The connector accepts solid and fine-stranded conductors from 0.08–2.5 mm² (28–12 AWG). Fine-stranded conductors with insulated ferrules are supported from 0.25–1.5 mm², while those with uninsulated ferrules are supported from 0.25–2.5 mm².
No. The connector uses WAGO CAGE CLAMP® spring pressure technology, which secures conductors without conventional terminal screws. An operating tool is used to open the spring clamp during conductor insertion or removal.
The connector features integrated snap-in mounting feet and is designed for compatible DIN-35 rail and panel mounting arrangements. The specified panel thickness range is 0.6–1.2 mm.
The connector measures 54 mm wide, 18.8 mm high and 27.5 mm deep. Its height above the mounting surface is 14.3 mm, and its approximate weight is 14.9 g.
The connector features an orange polyamide 66 housing, tin-plated electrolytic copper contacts and chrome-nickel spring steel clamping components. The insulating material has a UL 94 V-0 flammability classification.
No. The WAGO MCS MIDI Classic connector system includes connectors without breaking capacity, which must not be connected or disconnected while live or under load. The electrical circuit must be safely isolated before disconnecting the connector.
WAGO 231 Series MCS MIDI Classic connectors provide electrical engineers, industrial automation specialists and OEM machine builders with reliable CAGE CLAMP® connection technology, flexible snap-in mounting and efficient conductor termination for dependable modular electrical connections in modern industrial control and automation systems.
We use cookies
We use essential cookies to run this site, your basket and checkout. With your permission we'd also like to use analytics and advertising cookies to understand how the site is used and to measure our adverts.