Standard delivery
£8 ex VAT · free over £200UK parcel delivery is £8 ex VAT, or free on orders over £200 ex VAT.
Heavier items may be charged at a weight-based or pallet rate, shown at checkout.
£3.42
The WAGO 231-640/017-000 is a robust and reliable 10-pole PCB terminal block with CAGE CLAMP® spring pressure connection technology, designed for secure electrical connections in industrial automation, electronic control equipment and printed circuit board assemblies. As part of the established WAGO 231 Series, it provides a dependable solution for connecting field wiring directly to PCB-mounted electrical and electronic equipment.
Featuring integrated clamping collars, mounting flanges and through-hole solder connections, this terminal block is designed for secure mechanical installation and efficient electrical wiring. WAGO's proven CAGE CLAMP® technology enables screwless conductor termination using an operating tool, helping maintain consistent electrical contact pressure without conventional terminal screws.
With a 16 A IEC rated current, 5.08 mm contact pitch and support for conductor cross-sections from 0.08–2.5 mm², the WAGO 231-640/017-000 is suitable for a wide range of industrial control and electrical distribution applications. Its 10-pole configuration, orange polyamide housing and panel-mounting capability make it particularly useful for control cabinets, industrial electronics and OEM equipment.
The WAGO 231-640/017-000 combines reliable PCB mounting with WAGO's established CAGE CLAMP® spring pressure connection system. This technology secures electrical conductors using a spring mechanism rather than conventional terminal screws, helping maintain consistent contact pressure and reducing the risk of connections loosening during normal industrial operation.
The connector features 10 independent conductor connection points, allowing multiple electrical circuits to be terminated in a compact arrangement. Its support for solid and fine-stranded copper conductors makes it suitable for control wiring, electronic equipment and industrial machinery where flexible conductor selection and efficient assembly are important.
The through-hole solder pins establish the electrical connection between the terminal block and the printed circuit board. Integrated mounting flanges provide additional mechanical support, making the connector suitable for PCB-mounted, panel-mounted and feed-through installations. Depending on the enclosure design, the terminal block can be mounted flush with the panel or arranged to protrude through it.
With a 16 A IEC current rating and voltage ratings determined by the applicable overvoltage category and pollution degree, the WAGO 231-640/017-000 offers a versatile connection solution for appropriately rated industrial circuits. The combination of spring pressure termination, durable insulating materials and secure mounting supports dependable electrical connections in automation and electronic control equipment.
Tick the specs you need, then view products that match.
| Current | 16 A | |
|---|---|---|
| Voltage | 320 V | |
| Product Series | WAGO 231 | |
| Rated surge voltage | 4 kV | |
| Number of plug-in contact rows | 1 | |
| Flammability class of insulation material according to UL 94 | V0 | |
| Operating temperature | -60 – 105 °C | |
| Rated current In | 16 A | |
| Material insulation body | Thermoplastic | |
| Housing colour | Orange | |
| Modular spacing contacts | 5.08 mm | |
| Angle PCB/contact | Other | |
| Contact type | Pin | |
| Type of electric connection | Soldering connection | |
| Type of fastening | Solder | |
| Type of connection | Flexible PCB-connector | |
| Length pin | 4.7 mm | |
| Modular spacing connections | 5.08 mm | |
| Number of poles | 10 | |
| Connector model | Free connector | |
| Suitable for PCB thickness | 1.5 mm | |
| Rated voltage | 320 V | |
| Material of contact surface | Tin | |
| Pollution degree | 2 | |
| Overvoltage category | III | |
| Type of PCB fastening | Connecting contact | |
| Manufacturer | WAGO | |
| Series | 231 Series | |
| Model | 231-640/017-000 | |
| Product type | PCB terminal block with clamping collar | |
| Connection technology | CAGE CLAMP® | |
| Number of connection points | 10 | |
| Number of potentials | 10 | |
| Number of levels | 1 | |
| Number of connection types | 1 | |
| Contact pitch | 5.08 mm | |
| Rated current (IEC) | 16 A | |
| Rated voltage (IEC, III/3) | 320 V | |
| Rated voltage (IEC, III/2) | 320 V | |
| Rated voltage (IEC, II/2) | 630 V | |
| Rated impulse voltage | 4 kV | |
| Rated current (UL 1059, use group B) | 15 A | |
| Rated voltage (UL 1059, use group B) | 300 V | |
| Rated current (UL 1059, use group C) | 15 A | |
| Rated voltage (UL 1059, use group C) | 150 V | |
| Rated current (UL 1059, use group D) | 10 A | |
| Rated voltage (UL 1059, use group D) | 300 V | |
| Termination method | Screwless spring pressure clamp | |
| Actuation method | Operating tool | |
| Solid conductor cross-section | 0.08–2.5 mm² | |
| Fine-stranded conductor cross-section | 0.08–2.5 mm² | |
| Conductor size | 28–14 AWG | |
| Fine-stranded conductor with insulated ferrule | 0.25–1.5 mm² | |
| Fine-stranded conductor with uninsulated ferrule | 0.25–2.5 mm² | |
| Conductor stripping length | 8–9 mm | |
| Conductor connection direction to PCB | 0° | |
| PCB connection type | Through-hole technology (THT) | |
| Solder pin arrangement | In-line across the terminal strip | |
| Number of solder pins per potential | 1 | |
| Solder pin dimensions | 0.8 × 1.3 mm | |
| Solder pin length | 4.7 mm | |
| Recommended PCB hole diameter | 1.8 mm (+0.1 mm tolerance) | |
| Mounting type | Mounting flange | |
| Installation type | PCB / panel / feed-through mounting | |
| Width | 66 mm | |
| Height | 19 mm | |
| Height above mounting surface | 14.3 mm | |
| Depth | 19.1 mm | |
| Contact material | Electrolytic copper | |
| Contact plating | Tin | |
| Clamping spring material | Chrome-nickel spring steel | |
| Insulating material | Polyamide 66 (PA66) | |
| Flammability classification | UL 94 V-0 | |
| Material temperature limits | −60 to +105 °C | |
| Material group | I | |
| Standards | IEC/EN 60664-1, UL 1059 | |
| Country of origin | Germany | |
| GTIN | 4044918283243 |
The WAGO 231-640/017-000 is a 10-pole PCB terminal block designed to connect electrical conductors to printed circuit boards in industrial automation equipment, electrical control panels and electronic control systems.
The terminal block provides 10 independent connection positions arranged in a single row with a 5.08 mm contact pitch.
The connector has an IEC rated current of 16 A. Under UL 1059 specifications, it is rated at 15 A for use groups B and C, and 10 A for use group D.
The WAGO 231-640/017-000 is rated at 320 V under IEC overvoltage category III and 630 V under overvoltage category II, pollution degree 2. Its UL voltage ratings vary according to the applicable use group.
The terminal block accepts solid and fine-stranded conductors from 0.08–2.5 mm² (28–14 AWG). Fine-stranded conductors with insulated ferrules are supported from 0.25–1.5 mm², while those with uninsulated ferrules are supported from 0.25–2.5 mm².
No. The connector uses WAGO CAGE CLAMP® spring pressure technology, which secures conductors without conventional terminal screws. An operating tool is used to open the spring clamp during conductor insertion or removal.
The connector features through-hole solder pins and integrated mounting flanges, allowing it to be soldered to a PCB and mechanically secured in suitable panel or feed-through mounting arrangements.
The terminal block measures 66 mm wide, 19 mm high and 19.1 mm deep. Its height above the mounting surface is 14.3 mm.
The connector features an orange polyamide 66 housing, tin-plated electrolytic copper contacts and chrome-nickel spring steel clamping components. The insulating material has a UL 94 V-0 flammability classification.
Yes. The connector is suitable for industrial automation, PCB assemblies, electronic control modules, electrical cabinets and OEM machinery requiring secure conductor termination and reliable PCB connections within the specified electrical ratings.
WAGO 231 Series PCB terminal blocks provide electrical engineers, industrial automation specialists and OEM equipment manufacturers with reliable CAGE CLAMP® connection technology, secure PCB mounting and efficient conductor termination for dependable electrical connections in modern industrial control and electronic equipment.
We use cookies
We use essential cookies to run this site, your basket and checkout. With your permission we'd also like to use analytics and advertising cookies to understand how the site is used and to measure our adverts.