Standard delivery
£8 ex VAT · free over £200UK parcel delivery is £8 ex VAT, or free on orders over £200 ex VAT.
Heavier items may be charged at a weight-based or pallet rate, shown at checkout.
£4.23
The WAGO 231-639 is a 9-pole pluggable male connector from the WAGO MCS MIDI Classic 231 Series, designed for reliable electrical connections in industrial automation, machinery and control equipment. Featuring CAGE CLAMP® spring pressure connection technology, a 5.08 mm pin spacing and an orange insulating housing, it provides a practical solution for modular electrical wiring.
With nine independent conductor connection positions, the WAGO 231-639 allows multiple electrical circuits to be connected through one detachable interface. Its screwless CAGE CLAMP® terminals support efficient cable pre-assembly and on-unit wiring, with vertical and horizontal actuation using a suitable operating tool.
The connector accommodates solid and fine-stranded conductors from 0.08–2.5 mm², has a nominal conductor cross-section of 2.5 mm² and carries an IEC rated current of 12 A. Its free-hanging, in-line construction is suitable for wire-to-wire and compatible board-to-wire connection arrangements.
Industrial automation systems depend on reliable electrical interfaces between control panels, machinery modules and electronic equipment. WAGO's MCS MIDI Classic pluggable connection system combines spring pressure conductor termination with detachable connector arrangements, helping simplify wiring preparation, equipment assembly and maintenance.
The WAGO 231-639 provides nine conductor connection positions in a free-hanging connector suitable for compatible wire-to-wire and board-to-wire assemblies. Its CAGE CLAMP® technology supports efficient conductor termination without conventional terminal screws. The connector should be mated only with compatible components and must not be connected or disconnected under load unless the complete assembly is specifically rated for that operation. Equipment design should also prevent accessible male contacts from remaining energised when unmated.
Tick the specs you need, then view products that match.
| Current | 12 A | |
|---|---|---|
| Voltage | 320 V | |
| Product Series | WAGO 231 | |
| Rated surge voltage | 4 kV | |
| Number of plug-in contact rows | 1 | |
| Connectable cable type | Tubular cable | |
| Flammability class of insulation material according to UL 94 | V0 | |
| Operating temperature | -60 – 100 °C | |
| Rated current In | 12 A | |
| Connectable conductor cross section fine-strand without cable end sleeve | 0.08 – 2.5 mm² | |
| Degree of protection (IP), mounted | IP10 | |
| Material insulation body | Thermoplastic | |
| Coating housing | Uncoated | |
| Connectable conductor cross section multi-wired | 0.08 – 2.5 mm² | |
| Housing colour | Orange | |
| Modular spacing contacts | 5.08 mm | |
| Angle contact/conductor connection | 180° (horizontal) | |
| Contact type | Pin | |
| Material contact | Other copper alloys | |
| Type of electric connection | Spring clamp connection | |
| Housing material | Plastic | |
| Type of connection | Printed circuit board to cable | |
| Connectable conductor cross section fine-strand with cable end sleeve | 0.25 – 1.5 mm² | |
| Modular spacing connections | 5.08 mm | |
| Number of poles | 9 | |
| Material of contact surface | Tin | |
| Rated voltage | 320 V | |
| Pollution degree | 2 | |
| Connectable conductor cross section solid-core | 0.08 – 2.5 mm² | |
| Overvoltage category | III | |
| Manufacturer | WAGO | |
| Series | MCS MIDI Classic 231 | |
| Model | 231-639 | |
| Manufacturer part number | 231-639 | |
| Product type | 1-conductor pluggable male connector | |
| Connector configuration | 9-pole, single level | |
| Total connection points | 9 | |
| Number of potentials | 9 | |
| Connection technology | CAGE CLAMP® | |
| Termination method | Spring pressure connection | |
| Actuation method | Operating tool | |
| Actuation arrangement | Vertical and horizontal CAGE CLAMP® actuation | |
| Conductor entry relative to mating direction | 180° | |
| Pin spacing | 5.08 mm | |
| Nominal conductor cross-section | 2.5 mm² | |
| Solid conductor cross-section | 0.08–2.5 mm² | |
| Fine-stranded conductor cross-section | 0.08–2.5 mm² | |
| Conductor size | 28–12 AWG | |
| Fine-stranded conductor with insulated ferrule | 0.25–1.5 mm² | |
| Fine-stranded conductor with uninsulated ferrule | 0.25–2.5 mm² | |
| Conductor stripping length | 8–9 mm | |
| Rated current (IEC) | 12 A | |
| Rated voltage (IEC, II/2) | 630 V | |
| Rated impulse voltage (IEC, II/2) | 4 kV | |
| Rated current (UL) | 15 A | |
| Rated voltage (UL) | 600 V | |
| Mounting type | Free-hanging / in-line | |
| Contact material | Electrolytic copper | |
| Contact plating | Tin | |
| Clamping spring material | Chrome-nickel spring steel | |
| Insulating material | Polyamide 66 (PA66) | |
| Flammability classification | UL 94 V-0 | |
| Operating temperature range | -60 to +100 °C | |
| Width | 48.92 mm | |
| Height | 14.3 mm | |
| Depth | 27.5 mm | |
| Weight | 13.833 g | |
| Country of origin | Germany | |
| GTIN | 4044918260466 | |
| Applicable standards | IEC/EN 61984, UL 1059 and UL 1977 | |
| Product category | Pluggable Connection Systems |
The WAGO 231-639 is a 9-pole MCS MIDI Classic male connector designed for detachable electrical connections in industrial control panels, machinery and automation equipment. It uses CAGE CLAMP® spring pressure technology for conductor termination.
The connector has 9 poles, providing nine independent conductor connection positions with 5.08 mm pin spacing.
The connector accepts solid and fine-stranded conductors from 0.08–2.5 mm², equivalent to 28–12 AWG. Fine-stranded conductors with insulated ferrules are supported from 0.25–1.5 mm², and the specified conductor stripping length is 8–9 mm.
The WAGO 231-639 has an IEC rated current of 12 A and an IEC rated voltage of 630 V under overvoltage category II, pollution degree 2 conditions. Listed UL ratings include 15 A and 600 V. The applicable rating depends on the approval conditions and compatible mating components.
The WAGO 231-639 is a free-hanging, in-line male connector without an integrated mounting flange. Conductors are terminated using CAGE CLAMP® spring pressure terminals operated with a suitable tool. It can be used for wire-to-wire and board-to-wire connections with appropriately matched WAGO components.
WAGO MCS MIDI Classic pluggable connectors provide electrical panel builders, automation engineers and OEM equipment manufacturers with practical solutions for secure conductor termination and modular electrical connections. The WAGO 231-639 combines nine connection poles, 5.08 mm spacing, CAGE CLAMP® technology and free-hanging construction for organised, serviceable industrial wiring installations.
We use cookies
We use essential cookies to run this site, your basket and checkout. With your permission we'd also like to use analytics and advertising cookies to understand how the site is used and to measure our adverts.